Jump to content
Sign in to follow this  
AlexMercer

Which Ram ?

Recommended Posts

I want to know which one overclocks better :

DDR3 Hot-rod Red EVO VELOCE QUAD CHANNEL PC3-22400 2800MHz C11 EVO VELOCE QUAD CHANNEL SKU#: GEV316GB2800C11QC | GEV316GB2800C11AQC (http://www.geil.com.tw/products/showSpec/id/375) OR

TridentX F3-2666C11Q-32GTXD DDR3 (http://gskill.com/products.php?index=527)

 

please don't suggest any ram below 2666mhz and 8gb

Share this post


Link to post
Share on other sites

My personal opinion....NIETHER!!!

 

For RAM all I use is Kingston Hyper-X

 

However I also think Corsair makes a solid product...

 

 

please don't suggest any ram below 2666mhz and 8gb

 

Why? With AMD it makes a little difference but not enough for the extra cost usually and with Intel anything past 1600 really makes next to no difference.

Edited by ComputerEd

Share this post


Link to post
Share on other sites

Corsair Dominator Platinum PC3- 22400 16GB kit CMD16GX3M4A2800C11 @ 2933mhz rock solid 11-14-14-35-2T and 31.3ns Latency @ 1.65V is the best I have tested with my 3770K, But at those speeds it all depends on your CPU's Internal Memory Controler capability.

Ivy Bridge chips have a vary strong IMC, But a 3770K that is capable of doing 2800MHz DDR plus, is somewhere around 1 in 50 when it comes to Retail CPUs.

Edited by Braegnok

Share this post


Link to post
Share on other sites

My personal opinion....NIETHER!!!

 

For RAM all I use is Kingston Hyper-X

 

Heh heh if I was sponsored by them I'd also punt them. Jokes aside all top tier RAM is much of a muchness.

Share this post


Link to post
Share on other sites

In an AMD FX machine the FX chips only support up to 1866. Anything faster would be a big waste of $$$$$, if you're building an AMD powered system.

Share this post


Link to post
Share on other sites

 

My personal opinion....NIETHER!!!

 

For RAM all I use is Kingston Hyper-X

 

Heh heh if I was sponsored by them I'd also punt them. Jokes aside all top tier RAM is much of a muchness.

Actually Skid if you had asked me fore they sponsored I would have said the same thing. Kingston is the ONLY RAM I have ever used that has never given me a compatibility issue or dead stick. That is why they are all I use.

Share this post


Link to post
Share on other sites

I just want to what overclocks better :rtfm: don't care if it makes a difference or not :rtfm:

 

If it doesn't offer an improvement.....What's the point?

Share this post


Link to post
Share on other sites

 

 

My personal opinion....NIETHER!!!

 

For RAM all I use is Kingston Hyper-X

 

Heh heh if I was sponsored by them I'd also punt them. Jokes aside all top tier RAM is much of a muchness.

Actually Skid if you had asked me fore they sponsored I would have said the same thing. Kingston is the ONLY RAM I have ever used that has never given me a compatibility issue or dead stick. That is why they are all I use.

 

Hay Ed

Kingston HyperX T1 4GB kit will run @ 2800MHz CL12,  and is vary stable memory, +1 on the compatibility issue or dead stick with Kingston modules.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×