Clay Posted March 23, 2011 Posted March 23, 2011 (edited) Yuma... Today it was nice and cool though. 77.5f now on the front porch. I think on the average it's a bit warmer here. But then I haven't looked at a weather map in ages.... The temps can make overclocking a bit difficult. Especially since I'm used to the heat. And when I lower the temps enough to make much of a difference to the computer. It's too cold for me.. Where at in AZ? I'm down in Tucson. Even with the rain it was high 70s here today. Before the rain it was hovering around 90 already lol Edited March 23, 2011 by Clay Share this post Link to post Share on other sites More sharing options...
Nyt Posted March 25, 2011 Posted March 25, 2011 Phew its finally updated . I'll get some temps from my 920 this weekend Share this post Link to post Share on other sites More sharing options...
fivex1950 Posted April 1, 2011 Posted April 1, 2011 (edited) I believe I have some of the lowest temps posted on this section, for an air cooled system, and in some cases lower than water cooled. I have overclocked this i7 920 to 4.2gb + (verified and posted on CPUID's web site). But it is like a Dragster, you run it FULL OUT at max horsepower it doesn't last very long. That is why I throttled it back to 3.8gb. I noticed MANY of you people running your Intel's at VERY high temps during load testing, 70c +. If you check with Intel, they will highly advise not exceeding 70c at ANY given time. Intel advises not exceeding 68c. Just a word of caution. Motherboard- Asus P6X58 Premium Processor- i7-920 2.6 ghz @ 3.8ghz CPU Cooler- Coolmaster Hyper Z600 w/2-120mm push pull fans P/S Unit- Ultra LSP 750w HD's- 1TB WD Caviar Blk SATA 6 2xWD Caviar Blk 500gb SATA 6 Raid0 Ram- 6gb G.Skill DDR3 1600 Video- 2xNvidia 9800 GT+1G SLI Case- Coolmaster 932 HAF Monster Case Edited April 2, 2011 by fivex1950 Share this post Link to post Share on other sites More sharing options...
SpeedCrazy Posted April 1, 2011 Posted April 1, 2011 @ above, I went to look that up and you are right. I have been told that under 90 is fine while benching but Tcase for i7 930 is 69C, i am folding 24/7 and i am at 65C while running stock. at 3.8 that number is 75C normally. Share this post Link to post Share on other sites More sharing options...
Nyt Posted April 10, 2011 Posted April 10, 2011 Intel overestimates so I dont really worry about Tcase max . I just like to keep it under 80C under heavy stress and in the 70's under heavy gaming Did some tests this morning on my i7 920 D0 ... Im going to import either some 3000rpm Scythes or 5500rpm Delta's later this year ... i7 920 D0 @ 2.33GHz stock at stock voltage with Corsair H70 Push/Pull 2000rpm fans at idle of 32C and load of 50C at an ambiant of 24C i7 920 D0 @ 3GHz at 1.192v with Corsair H70 Push/Pull 2000rpm fans at idle of 32C and load of 52C at an ambiant of 24C i7 920 D0 @ 3.5GHz stock at 1.232v with Corsair H70 Push/Pull 2000rpm fans at idle of 33C and load of 58C at an ambiant of 24C i7 920 D0 @ 3.927GHz at 1.272v with Corsair H70 Push/Pull 2000rpm fans at idle of 34C and load of 65C at an ambiant of 24C i7 920 D0 @ 4GHz at 1.296v with Corsair H70 Push/Pull 2000rpm fans at idle of 35C and load of 68C at an ambiant of 24C i7 920 D0 @ 4.158GHz at 1.3375v with Corsair H70 Push/Pull 2000rpm fans at idle of 40C and load of 80C at an ambiant of 25C Share this post Link to post Share on other sites More sharing options...
Nyt Posted April 10, 2011 Posted April 10, 2011 UPDATED I'll get some temps from my budget LGA775 rig later this afternoon ... But Im begining to wonder if the jump from 4GHz to 4.158GHz is worth 10C ... Share this post Link to post Share on other sites More sharing options...
medbor Posted April 10, 2011 Posted April 10, 2011 Mine are a little weird: Q6600 @ 2.7GHz Hyper 212+ Idle 44C (cores around 27), Load 53C (cores around 36) which one to trust? Also the temps doesn't vary by much (even between 1.5GHz-3.05GHz) Idle stays at 40-45C (25-30 cores) and load 50-60C (35-45 cores), depending on how i clock it. Ambient is around 18-22C Share this post Link to post Share on other sites More sharing options...
Nyt Posted April 10, 2011 Posted April 10, 2011 Mine are a little weird: Q6600 @ 2.7GHz Hyper 212+ Idle 44C (cores around 27), Load 53C (cores around 36) which one to trust? Also the temps doesn't vary by much (even between 1.5GHz-3.05GHz) Idle stays at 40-45C (25-30 cores) and load 50-60C (35-45 cores), depending on how i clock it. Ambient is around 18-22C Which temp monitor are you using ? I would use what core temp gives you for the cores Share this post Link to post Share on other sites More sharing options...
VaporX Posted April 10, 2011 Posted April 10, 2011 While the idea behind this is neat the information is about meaningless. For any kind of accurate gauage you need a number of variables account for that are not. CPU Temp is effected by the following factors: 1) Clockspeed 2) Voltage 3) Cores 4) position is wfer production ( a chip made day one of the chips production will typcially not run as cool as one made day 200. the production process gets more refined) 5) room air temperature 6) heatsink 7) thermal compound 8) case design 9) number of case fans 10) software used to stress the CPU 11) length of time the stress was run before measuring 12) software used to measure the temp While the comparisions can be neat it is impossible to build an accurate chart system without taking all varibales into account. Share this post Link to post Share on other sites More sharing options...
Nyt Posted April 10, 2011 Posted April 10, 2011 While the idea behind this is neat the information is about meaningless. For any kind of accurate gauage you need a number of variables account for that are not. CPU Temp is effected by the following factors: 1) Clockspeed 2) Voltage 3) Cores 4) position is wfer production ( a chip made day one of the chips production will typcially not run as cool as one made day 200. the production process gets more refined) 5) room air temperature 6) heatsink 7) thermal compound 8) case design 9) number of case fans 10) software used to stress the CPU 11) length of time the stress was run before measuring 12) software used to measure the temp While the comparisions can be neat it is impossible to build an accurate chart system without taking all varibales into account. Well you can make one with all of your info People wouldn't respond if you ask too much of them Its just to get a rough idea of temps with different coolers Share this post Link to post Share on other sites More sharing options...
Nyt Posted April 10, 2011 Posted April 10, 2011 My buddy in SA has a pair of 3k Delta 100CFM's and 2 Panaflo's at around 120CFM that Im buying off him for cheap so the H70 will get the Delta's and the 2 of the 3 top extraction fans will be the 2 Panaflo's and a 2k CM Red LED Share this post Link to post Share on other sites More sharing options...
Drdeath Posted April 25, 2011 Posted April 25, 2011 Unfortunately, Coretemp will not show my temps...... Here is -62...LOL Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now