Jump to content
Nyt

Various CPU Temperature Comparisons

Recommended Posts

So i bulid my new comp, not clocked yet just testing.

So i have i7 with yasya cooler.

Temperatures on all minimum rpm are sometimes:

 

Core 0: 28°C @3.4Ghz

Core 1: 28°C @3.4Ghz

Core 2: 31°C @3.4Ghz

Core 3: 35°C @3.4Ghz

 

I am worried about inequality of temperatures in core 3! That big inequality is not allways case, but 7° is maximum deviation that i see sometimes.

 

Am I normal? :) Do I have to adjust cooler seat?

 

Tnx

Edited by klokan

Share this post


Link to post
Share on other sites

So i bulid my new comp, not clocked yet just testing.

So i have i7 with yasya cooler.

Temperatures on all minimum rpm are sometimes:

 

Core 0: 28°C @3.4Ghz

Core 1: 28°C @3.4Ghz

Core 2: 31°C @3.4Ghz

Core 3: 35°C @3.4Ghz

 

I am worried about inequality of temperatures in core 3! That big inequality is not allways case, but 7° is maximum deviation that i see sometimes.

 

Am I normal? :) Do I have to adjust cooler seat?

 

Tnx

It could of course be that the cooler is on unevenly, but probably not.

My cores can be 34, 30, 27, 25 some times and that is just normal. This is because windows tries to use one core at a time to conserve energy when no more than one is needed so for you right now most windows processes are scheduled on core 3 and the others are not in use, another day or in a few minutes it could be any of the other cores instead that shows a slightly higher temperature.

 

What is more interesting is when you load it (for example with cinebench, OCCT, Prime95...) and hopefully they will be more even then. if you have exremely high temps on one core during load i would check the seating of the cooler... (use CoreTemp to do the measurements)

Share this post


Link to post
Share on other sites

It could of course be that the cooler is on unevenly, but probably not.

My cores can be 34, 30, 27, 25 some times and that is just normal. This is because windows tries to use one core at a time to conserve energy when no more than one is needed so for you right now most windows processes are scheduled on core 3 and the others are not in use, another day or in a few minutes it could be any of the other cores instead that shows a slightly higher temperature.

 

What is more interesting is when you load it (for example with cinebench, OCCT, Prime95...) and hopefully they will be more even then. if you have exremely high temps on one core during load i would check the seating of the cooler... (use CoreTemp to do the measurements)

 

thanx, i use speedfan.

I hade total issue with that cooler, it is hard to put it on 1155. I didnt hear the click, but when see the back it seems it was ok. take lok of photo:

5v0mj4.jpg

Share this post


Link to post
Share on other sites

Updated:

7.i7 950 d0 @ 4.31GHz 1.400v | OCZ Freeze | Swiftech custom 120.3 rad with MCP350 pump and six push/pull 120mm Noctua NF-P12's at ULNA (5v) = 65C

13. i7 2600K @ 4.8GHz 1.455 | Swiftech custom Dual Stack (2) 120.2 rads and two push/pull 120mm Noctua NF-P12's at ULNA (5v) with MCP655 and also cooling two overclocked HD 6970's | Max Temp = 74C

14. i7 2700K @ 5.0 GHz 1.440 | Swiftech custom 120.4 rad and 2 push, 4 pull 120mm Noctua NF-P12's and 120.1 rad and push/pull 120mm Noctua NF-P12's at ULNA (5v) with MCP655 and also cooling two overclocked GTX 580's and a GTX 460 1GB | Max Temp = 72C

Share this post


Link to post
Share on other sites

I was going to post my first OC attempt WITHOUT auto voltage, so I'll add it to this thread also.

 

AMD Phenom II x4 940 @ 3.485 with Vcore 1.4375

Temps are 33C at load while folding. Didn't use any other stress method for stability but it's been 6 hours at full load. I fold 24/7, so we'll see how she hangs!

:foldon:

post-67055-0-47085100-1330988527_thumb.png

Share this post


Link to post
Share on other sites

E8600 4200.07 MHz With Corsair H100 set on Med. speed And all case fans on Med. speed, ambient air temp. 24.8 c.

Edited by Braegnok

Share this post


Link to post
Share on other sites

Room temperature @ about 72' F

 

Core temp readings in Photo.

 

I7 950 DO at 4,10 ghz.

Vcore: 1.40

QPI: 1.410

PLL: 1.92

 

Shot of 4.10Ghz.PNG

Share this post


Link to post
Share on other sites

Room temperature is about 72F.

 

Ended up moving my i7 2700K to my Test Bench, since my main rig will now have a 3930K.

 

Finally used a Maingear Epic T1000 (Indigo Xtreme), and here are my temps:

CPU: i7 2700K @4.9 GHz w/HT 1.420 Vcore BIOS 3202; 1.416V - 1.424V CPU-Z | Maingear Epic T1000 + Swiftech Apogee XT 120.3 Push + Pull (5v) Max 67C Prime95

CPU: i7 2700K @5.0 GHz w/HT 1.460 Vcore BIOS 3202; 1.464V - 1.472V CPU-Z | Maingear Epic T1000 + Swiftech Apogee XT 120.3 Push + Pull (5v) Max 70C Prime95

 

prime952700k50ghz.png

Share this post


Link to post
Share on other sites

I have an AMD FX-6100, and room temp is around 20C

 

Stock

Idle Temp: ~35C

Load Temp: ~40C

 

O.C. +400MHz

Idle Temp: ~35C

Load Temp: ~45C

 

 

The maximum limit for the CPU is 60C, so it is well within limits

Share this post


Link to post
Share on other sites

Intel E6500 Pentium D 775

 

Stock: ??

 

OC: 4004 MHz

Volt: 1.41 v

 

Idle: 33c

Load: 61c

Ambient: 21c

 

I need a new cpu....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×