Praz Posted March 14, 2010 Posted March 14, 2010 X2 550 C3 @ 264x15.5, 8GB Memory @ 1408MHz, Post 2 Of 3 Windows 7 64Bit Share this post Link to post Share on other sites More sharing options...
Praz Posted March 14, 2010 Posted March 14, 2010 X2 550 C3 @ 264x15.5, 8GB Memory @ 1408MHz, Post 3 Of 3 3dx Max 2009 w/V-ray Time to render: 8min 12sec TMPGEnc XPress 1GB VOB file ripped from DVD movie Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted March 14, 2010 Posted March 14, 2010 man you just keep pushing this thing.... rub it in man rub it in.... I got an itchy trigger finger to get one....beings the MSI 790GX-G65 I had died with the 955BE while in the BIOS....lol thinking of getting this and a 555BE to play with.... Share this post Link to post Share on other sites More sharing options...
Praz Posted March 14, 2010 Posted March 14, 2010 I would think the board will do well with the 955BE. I'm switching over to a 555BE now. Just hoping it clocks as well as the 550 has. Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted March 14, 2010 Posted March 14, 2010 well please post if it does...I am thinking of getting the combo here real quick... and your opinion matters alot... Share this post Link to post Share on other sites More sharing options...
Praz Posted March 16, 2010 Posted March 16, 2010 X2 550 C3 @ 270x15, 8GB Memory @ 1800MHz, Post 1 Of 3 Unlocked the 555BE either doesn't clock as well as the 550 or I just don't have a handle on it yet. But in the mean time here's some higher memory speeds with the 550. 8GB of OCZ CAS9 1866 Reaper @ 1800 CAS8. ASUS 4A89GTD Pro/USB3, 0402 BIOS Phenom II X2 550 C3 (All Cores Unlocked) 4x2GB OCZ Reaper (OCZ3RPR1866C9LV6GK) PC3-15000 1866MHz 9-9-9-28 270x15, Memory 1800MHz 8-8-8-27 OCZ 100GB Vertex LE100 SAPPHIRE 4870 Crossfire OCZ 1000WProXStream - 4 Rail Modified To Single Rail [b][color="Red"]Configure System Performance Settings[/color][/b] [b]----------------------------------------------------------[/b] [i]Target CPU Frequency:. 4050MHz[/i] [i]Target DRAM Frequency: 1800MHz[/i] [i]You can OC based om "OC From CPU Level Up"[/i] OC Tuner Utility AI Overclock Tuner ..................[Manual] [i]OC From CPU Level Up.................[Auto][/i] CPU Ratio............................[15] CPU Bus Frequency....................[270] PCIE Frequency.......................[100] DRAM Frequency.......................[1800MHz] CPU/NB Frequency.....................[2700MHz] HT Link Speed........................[2700MHz] > DRAM Timing Configuration > DRAM Driving Configuration [b]************* Please key in numbers directly! *************[/b] CPU & NB Voltage Mode................[Offset] CPU Offset Sign....................[+] CPU Offset Voltage.................[i]1.524[/i] [0.156250] CPU/NB Offset Sign.................[+] CPU/NB Offset Voltage..............[i]1.293[/i] [0.093750] CPU VDDA Voltage.....................[i]2.496[/i] [Auto] DRAM Voltage.........................[i]1.731[/i] [1.72500] HT Voltage...........................[i]1.243[/i] [1.25000] NB Voltage...........................[i]1.281[/i] [1.30000] NB 1.8V Voltage......................[i]1.800[/i] [Auto] SB Voltage...........................[i]1.100[/i] [Auto] SidePort Memory Voltage..............[i]1.500[/i] [Auto] [b]**********************************************************[/b] CPU Load-Line Calibration............[Auto] CPU/NB Load-Line Calibration.........[Auto] CPU Spread Spectrum..................[Auto] PCIE Spread Spectrum.................[Auto] [b]******************** GFX Overclocking ********************[/b] Internal Graphics Mode...............[uMA+SIDEPORT] UMA Frame Buffer Size..............[Auto] SIDEPORT Clock Speed...............[DDR3-1333MHz] GFX Engine Clock Override............[Disabled] [color="Red"]DRAM Timing Configuration[/color] DRAM CAS# Latency....................8 [8 CLK] DRAM RAS# to CAS# Delay..............8 [8 CLK] DRAM RAS# PRE Time...................8 [8 CLK] DRAM RAS# ACT Time..................27 [27 CLK] DRAM READ to PRE Time................5 [Auto] DRAM Row Cycle Time.................35 [35 CLK] DRAM WRITE Recovery Time............10 [Auto] DRAM RAS# to RAS# Delay..............4 [Auto] DRAM READ To WRITE Delay.............7 [Auto] DRAM WRITE To READ Delay(DD).........2 [Auto] DRAM WRITE To READ Delay(SD).........5 [Auto] DRAM WRITE To WRITE Timing...........4 [Auto] DRAM READ To READ Timing.............4 [Auto] DRAM REF Cycle Time................110 [Auto] DRAM Refresh Rate..................7.8 [Auto] DRAM Command Rate...................1T [1T] [color="Red"]DRAM Driving Configuration[/color] [i]DCTO Information:[/i] CKE drive strength..................2X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength.............2X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength..............1.25X [Auto] DQS drive strength...............1.25X [Auto] Processor ODT...................60ohms [Auto] [i]DCTO Information:[/i] CKE drive strength..................2X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength.............2X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength..............1.25X [Auto] DQS drive strength...............1.25X [Auto] Processor ODT...................60ohms [Auto] [b][color="Red"]CPU Configuration[/color][/b] [i]AGESA Version 3.5.4.0[/i] ---------------------------------------------------------- [i]AMD Phenom(tm) II X4 B50 Processor Revision: C3 Cache L1: 512KB Cache L2: 2048KB Cache L3: 6MB Speed : 4063MHz, NB Clk: 2000MHz uCode Patch Level: 0x10000B6[/i] ---------------------------------------------------------- Microcode Updation..................[Enabled] Secure Virtual Machine Mode.........[Enabled] Cool'n'Quite........................[Disabled] ASUS Core Unlocker..................[Enabled] Active CPU Cores..................[4 Core Operation] C1E Support.........................[Disabled] [b][color="Red"]DRAM Controller Configuration[/color][/b] ---------------------------------------------------------- Channel Interleaving................[XOR of Address Bit] MemClk Tristate C3/ATLVID...........[Disabled] Memory Hole Remapping...............[Enabled] DCT Unganged Mode...................[Always] Power Down Enable...................[Disabled] Share this post Link to post Share on other sites More sharing options...
Praz Posted March 16, 2010 Posted March 16, 2010 X2 550 C3 @ 270x15, 8GB Memory @ 1800MHz, Post 2 Of 3 Windows 7 64Bit Share this post Link to post Share on other sites More sharing options...
Praz Posted March 16, 2010 Posted March 16, 2010 X2 550 C3 @ 270x15, 8GB Memory @ 1800MHz, Post 3 Of 3 3dx Max 2009 w/V-ray Time to render: 8min 12sec TMPGEnc XPress 1GB VOB file ripped from DVD movie Share this post Link to post Share on other sites More sharing options...
Praz Posted March 20, 2010 Posted March 20, 2010 X2 550 C3 @ 310x13, 4GB Memory @ 1653MHz, Post 1 Of 3 Have a low multiplier locked CPU and would still like to run at 4000MHZ speeds? No problem with this board. Just crank the bus frequency up. The board runs as easily at 13x310 as it does stock. ASUS 4A89GTD Pro/USB3, 0003 BIOS Phenom II X2 550 C3 (All Cores Unlocked) 2x2GB OCZ Reaper (OCZ3RPR1800LV6GK) PC3-14400 1800MHz 8-8-8-26 264x15.5, Memory 1653MHz 7-7-7-21 OCZ 100GB Vertex LE100 SAPPHIRE 4870 Crossfire OCZ 1000WProXStream - 4 Rail Modified To Single Rail [b][color="Red"]Configure System Performance Settings[/color][/b] [b]----------------------------------------------------------[/b] [i]Target CPU Frequency:. 4030MHz[/i] [i]Target DRAM Frequency: 1653MHz[/i] [i]You can OC based om "OC From CPU Level Up"[/i] OC Tuner Utility AI Overclock Tuner ..................[Manual] [i]OC From CPU Level Up.................[Auto][/i] CPU Ratio............................[13] CPU Bus Frequency....................[310] PCIE Frequency.......................[100] DRAM Frequency.......................[1653MHz] CPU/NB Frequency.....................[2790MHz] HT Link Speed........................[2480MHz] > DRAM Timing Configuration > DRAM Driving Configuration [b]************* Please key in numbers directly! *************[/b] CPU & NB Voltage Mode................[Offset] CPU Offset Sign....................[+] CPU Offset Voltage.................[i]1.488[/i] [0.13125] CPU/NB Offset Sign.................[+] CPU/NB Offset Voltage..............[i]1.359[/i] [0.159375] CPU VDDA Voltage.....................[i]2.487[/i] [Auto] DRAM Voltage.........................[i]1.640[/i] [1.65625] HT Voltage...........................[i]1.243[/i] [1.24375] NB Voltage...........................[i]1.246[/i] [1.24375] NB 1.8V Voltage......................[i]1.800[/i] [Auto] SB Voltage...........................[i]1.100[/i] [Auto] SidePort Memory Voltage..............[i]1.500[/i] [Auto] [b]**********************************************************[/b] CPU Load-Line Calibration............[Auto] CPU/NB Load-Line Calibration.........[Auto] CPU Spread Spectrum..................[Auto] PCIE Spread Spectrum.................[Auto] [b]******************** GFX Overclocking ********************[/b] Internal Graphics Mode...............[uMA+SIDEPORT] UMA Frame Buffer Size..............[Auto] SIDEPORT Clock Speed...............[DDR3-1333MHz] GFX Engine Clock Override............[Disabled] [color="Red"]DRAM Timing Configuration[/color] DRAM CAS# Latency....................7 [7 CLK] DRAM RAS# to CAS# Delay..............7 [7 CLK] DRAM RAS# PRE Time...................7 [7 CLK] DRAM RAS# ACT Time..................21 [21 CLK] DRAM READ to PRE Time................4 [Auto] DRAM Row Cycle Time.................28 [28 CLK] DRAM WRITE Recovery Time.............8 [Auto] DRAM RAS# to RAS# Delay..............4 [Auto] DRAM READ To WRITE Delay.............6 [Auto] DRAM WRITE To READ Delay(DD).........2 [Auto] DRAM WRITE To READ Delay(SD).........4 [Auto] DRAM WRITE To WRITE Timing...........4 [Auto] DRAM READ To READ Timing.............4 [Auto] DRAM REF Cycle Time................110 [Auto] DRAM Refresh Rate..................7.8 [Auto] DRAM Command Rate...................1T [1T] [color="Red"]DRAM Driving Configuration[/color] [i]DCTO Information:[/i] CKE drive strength................1.5X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength...........1.5X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength.................1X [Auto] DQS drive strength..................1X [Auto] Processor ODT...................60ohms [Auto] [i]DCTO Information:[/i] CKE drive strength................1.5X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength...........1.5X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength.................1X [Auto] DQS drive strength..................1X [Auto] Processor ODT...................60ohms [Auto] [b][color="Red"]CPU Configuration[/color][/b] [i]AGESA Version 3.6.6.0[/i] ---------------------------------------------------------- [i]AMD Phenom(tm) II X4 B50 Processor Revision: C3 Cache L1: 512KB Cache L2: 2048KB Cache L3: 6MB Speed : 4030MHz uCode Patch Level: 0x10000B6[/i] ---------------------------------------------------------- Microcode Updation..................[Enabled] Secure Virtual Machine Mode.........[Enabled] Cool'n'Quite........................[Disabled] C1E Support.........................[Disabled] ASUS Core Unlocker..................[Enabled] Active CPU Cores..................[4 Core Operation] [b][color="Red"]DRAM Controller Configuration[/color][/b] ---------------------------------------------------------- Channel Interleaving................[XOR of Address Bit] MemClk Tristate C3/ATLVID...........[Disabled] Memory Hole Remapping...............[Enabled] DCT Unganged Mode...................[Always] Power Down Enable...................[Disabled] Share this post Link to post Share on other sites More sharing options...
Praz Posted March 20, 2010 Posted March 20, 2010 X2 550 C3 @ 310x13, 4GB Memory @ 1653MHz, Post 2 Of 3 Windows 7 64Bit Share this post Link to post Share on other sites More sharing options...
Praz Posted March 20, 2010 Posted March 20, 2010 X2 550 C3 @ 310x13, 4GB Memory @ 1653MHz, Post 3 Of 3 3dx Max 2009 w/V-ray Time to render: 8min 10sec TMPGEnc XPress 1GB VOB file ripped from DVD movie Share this post Link to post Share on other sites More sharing options...
Praz Posted April 1, 2010 Posted April 1, 2010 X2 555 C3 @ 212x19, 4GB Memory @ 1696MHz, Post 1 Of 3 ASUS 4A89GTD Pro/USB3, 1104 BIOS Phenom II X2 555 C3 (All Cores Unlocked) 2x2GB Kingston HyperX PC3-16000 2000MHz 8-8-8-24 212x19, Memory 1696MHz 6-6-6-21 OCZ 100GB Vertex LE100 SAPPHIRE 4870 Crossfire OCZ 1000WProXStream - 4 Rail Modified To Single Rail [b][color="Red"]Configure System Performance Settings[/color][/b] [b]----------------------------------------------------------[/b] [i]Target CPU Frequency:. 4028MHz[/i] [i]Target DRAM Frequency: 1696MHz[/i] [i]OC From CPU Level Up.................[Auto][/i] [b]----------------------------------------------------------[/b] OC Tuner Utility AI Overclock Tuner ..................[Manual] CPU Ratio............................[19] CPU Bus Frequency....................[212] PCIE Frequency.......................[100] DRAM Frequency.......................[1696MHz] CPU/NB Frequency.....................[2756MHz] HT Link Speed........................[2332MHz] > DRAM Timing Configuration > DRAM Driving Configuration [b]************* Please key in numbers directly! *************[/b] CPU & NB Voltage Mode................[Manual] CPU Voltage........................[i]1.512[/i] [1.500000] CPU/NB Voltage.....................[i]1.340[/i] [1.340625] CPU VDDA Voltage.....................[i]2.484[/i] [Auto] DRAM Voltage.........................[i]1.653[/i] [1.65000] HT Voltage...........................[i]1.271[/i] [1.27500] NB Voltage...........................[i]1.259[/i] [1.27500] NB 1.8V Voltage......................[i]1.800[/i] [Auto] SB Voltage...........................[i]1.100[/i] [Auto] SidePort Memory Voltage..............[i]1.500[/i] [Auto] [b]**********************************************************[/b] CPU Load-Line Calibration............[Auto] CPU/NB Load-Line Calibration.........[Auto] CPU Spread Spectrum..................[Auto] PCIE Spread Spectrum.................[Auto] [b]******************** GFX Overclocking ********************[/b] Internal Graphics Mode...............[Disabled] [color="Red"]DRAM Timing Configuration[/color] DRAM CAS# Latency....................6 [6 CLK] DRAM RAS# to CAS# Delay..............6 [6 CLK] DRAM RAS# PRE Time...................6 [6 CLK] DRAM RAS# ACT Time..................21 [21 CLK] DRAM READ to PRE Time................6 [Auto] DRAM Row Cycle Time.................27 [27 CLK] DRAM WRITE Recovery Time............12 [Auto] DRAM RAS# to RAS# Delay..............5 [Auto] DRAM READ To WRITE Delay.............6 [Auto] DRAM WRITE To READ Delay(DD).........2 [Auto] DRAM WRITE To READ Delay(SD).........6 [Auto] DRAM WRITE To WRITE Timing...........4 [Auto] DRAM READ To READ Timing.............4 [Auto] DRAM REF Cycle Time................110 [Auto] DRAM Refresh Rate..................7.8 [Auto] DRAM Command Rate...................1T [1T] [color="Red"]DRAM Driving Configuration[/color] [i]DCTO Information:[/i] CKE drive strength................1.5X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength...........1.5X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength.................1X [Auto] DQS drive strength..................1X [Auto] Processor ODT...................60ohms [Auto] [i]DCTO Information:[/i] CKE drive strength................1.5X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength...........1.5X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength.................1X [Auto] DQS drive strength..................1X [Auto] Processor ODT...................60ohms [Auto] [b][color="Red"]CPU Configuration[/color][/b] [i]AGESA Version 3.6.9.0[/i] ---------------------------------------------------------- [i]AMD Phenom(tm) II X4 B55 Processor Revision: C3 Cache L1: 512KB Cache L2: 2048KB Cache L3: 6MB Speed : 4041MHz uCode Patch Level: 0x10000B6[/i] ---------------------------------------------------------- Microcode Updation..................[Enabled] Secure Virtual Machine Mode.........[Enabled] Cool'n'Quite........................[Disabled] C1E Support.........................[Disabled] ASUS Core Unlocker..................[Enabled] Active CPU Cores..................[4 Core Operation] [b][color="Red"]DRAM Controller Configuration[/color][/b] ---------------------------------------------------------- Channel Interleaving................[XOR of Address Bit] MemClk Tristate C3/ATLVID...........[Disabled] Memory Hole Remapping...............[Enabled] DCT Unganged Mode...................[Always] Power Down Enable...................[Disabled] Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now