Jump to content

USB SPI Flash Programmer

Recommended Posts

I would be looking elsewhere. The supported device list is shameful. You will need to make up a cable to connect from the programmer to the motherboard's onboard SPI connector. Not all boards have this connector. If there is no connector you can program the chip off-board if it is removable. You will have to build a socketed interface card for the chip to plug into and use a cable from this card to the programmer. If the chip is soldered in place 3M makes connectors for this application that will clamp on the chip to allow programming. The connectors average about $50.00 each.

Share this post

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now
  • Create New...