Jump to content
Guest ajmatson

Water Cooling Gallery: Show off your work

Recommended Posts

Guest ajmatson

Ya I like Queenz and Mojo's too. Here is a quick of mine on the front page. I am waiting for the UV CCFL's for the case still. It took me two hours to hide all of the wires and cables but I think it turned out pretty well.

 

dsc05134.jpg

Share this post


Link to post
Share on other sites

My stripped i7 desktopcase !

And homemade WC.

Borrow WC cooler and pump from my AMD and build a new i7 cpu-block for an hour just for testing WC on i7.

Pumped up the speed from 4400mhz with Air to 4533mhz in CounterS

The i7 is going to get nice design with a smaller waterCooler welded to fit on top of case.

And a special welded peltierwatercooler on side :D

Some work pics

post-68804-1267889289_thumb.jpg

 

 

 

 

 

 

 

 

Share this post


Link to post
Share on other sites
These are awesome :thumbs-up:

 

Favorites so far: queenz + gotdamojo

 

 

EDIT: plus gotdamojo, a duster wouldn't hurt!!!

 

 

That pic is a few months old...I no longer have red dye in there and I did go ahead and dust it not too long ago ;)

 

 

But thanks guys...took about 3 hours to set everything up inside the case... :lol:

Edited by gotdamojo06

Share this post


Link to post
Share on other sites
Specs in sig. :rolleyes:
Ya I like Queenz and Mojo's too. Here is a quick of mine on the front page. I am waiting for the UV CCFL's for the case still. It took me two hours to hide all of the wires and cables but I think it turned out pretty well.

 

You'll both probably get better temps going res->pump->cpu->rad instead of pump->rad->cpu->res :)

Share this post


Link to post
Share on other sites
My stripped i7 desktopcase !

And homemade WC.

Borrow WC cooler and pump from my AMD and build a new i7 cpu-block for an hour just for testing WC on i7.

Pumped up the speed from 4400mhz with Air to 4533mhz in CounterS

The i7 is going to get nice design with a smaller waterCooler welded to fit on top of case.

And a special welded peltierwatercooler on side :D

Some work pics

desktop.JPG

 

 

 

 

 

 

 

Nice to see that kind of work!

Share this post


Link to post
Share on other sites
Ya I like Queenz and Mojo's too. Here is a quick of mine on the front page. I am waiting for the UV CCFL's for the case still. It took me two hours to hide all of the wires and cables but I think it turned out pretty well.

 

dsc05134.jpg

 

I think you need to fix the res! Its like the leaning tower and gives a noobish look to the Implementation! Other than that Quite nice!

Share this post


Link to post
Share on other sites

DSCF2926.jpg

 

DSC01128.jpg

 

DSC01120.jpg

 

i7 920 D0 4ghz|Corsair 1000 watts psu|Asus Rampage 2 extreme|Corsair 1800 Mhz Dominator 6GB|GTX 295|OCZ VERTEX 250GB SSD/Wd 500 Gb storage|Xfi Platinum sound card|Dell 24 inch Ultra Sharp|Logitech Z5500|Water Cooled|ABS Canyon 695 Case|

 

should be adding another vertex 250 gb drive for raid 0 soon along with the new intel 6 core processors and new gtx series

 

 

3.0 ghz i had it at 4.0 ghz but seen no real difference at all in anything i did so was a useless oc

 

idle low 30s and 50 on prime for a few hours.

Edited by rud3bwoy

Share this post


Link to post
Share on other sites
Guest ajmatson
You'll both probably get better temps going res->pump->cpu->rad instead of pump->rad->cpu->res :)

I have the setup that way in my other rig and the temp difference is negligible, 1C degree at best.

 

 

I think you need to fix the res! Its like the leaning tower and gives a noobish look to the Implementation! Other than that Quite nice!

I had it up however, the tubing I am using has the 5/8" wall and the bends were too much to the pump that it was causing kinking and because of the PSU I cannot lower the res anymore :( Best I could get it.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...