Jump to content
Sign in to follow this  
thepar

IOH, ICH, and PLL

Recommended Posts

I am currently over clocked to 3.675 GHZ with

My ram is running at about 1440 MHZ

 

BCLK Frequency 175

Intel ® SpeedStep Tech - Enabled

Intel ® Turbo Mode Tech - Enabled

PCIE Fequency - 100

 

Load line calibration - enabled

CPU VTT (Uncore) Voltage - 1.137

CPU Voltage 1.13600v

DRAM Voltage - 1.5 with 9-9-9-24 timings

 

It ran about 16 hours in prime 95 with no errors with

 

idol - 32C

load - 60 C

 

IOH Voltage - Auto

CPU PLL Voltage - Auto

ICH Voltage - Auto

CPU PLL Voltage - Auto

 

My question is will leaving IOH voltage, pll votage, and ICH voltage on auto hurt anything? Is that the highest i can go with turbo enabled? I am trying to get max performance not necessarily max over clock. I will be running pro tools 8.0 LE.

Share this post


Link to post
Share on other sites

Just depends some motherboards will over volt when on auto some dont, you are going to have to check it with some sort of software and hope its right or figure out where to check it on the motherboard with a volt meter, some boards like the classified have a place to check all these with a meter...

Share this post


Link to post
Share on other sites

You can go to your motherboard manufactures web site, go to the forums and see what others with the same

mb recommend or are setting theirs to.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...