thepar Posted January 4, 2010 Posted January 4, 2010 I am currently over clocked to 3.675 GHZ with My ram is running at about 1440 MHZ BCLK Frequency 175 Intel ® SpeedStep Tech - Enabled Intel ® Turbo Mode Tech - Enabled PCIE Fequency - 100 Load line calibration - enabled CPU VTT (Uncore) Voltage - 1.137 CPU Voltage 1.13600v DRAM Voltage - 1.5 with 9-9-9-24 timings It ran about 16 hours in prime 95 with no errors with idol - 32C load - 60 C IOH Voltage - Auto CPU PLL Voltage - Auto ICH Voltage - Auto CPU PLL Voltage - Auto My question is will leaving IOH voltage, pll votage, and ICH voltage on auto hurt anything? Is that the highest i can go with turbo enabled? I am trying to get max performance not necessarily max over clock. I will be running pro tools 8.0 LE. Share this post Link to post Share on other sites More sharing options...
road-runner Posted January 4, 2010 Posted January 4, 2010 Just depends some motherboards will over volt when on auto some dont, you are going to have to check it with some sort of software and hope its right or figure out where to check it on the motherboard with a volt meter, some boards like the classified have a place to check all these with a meter... Share this post Link to post Share on other sites More sharing options...
thepar Posted January 5, 2010 Posted January 5, 2010 Okay thank you. Do you know of any software that can check this? Share this post Link to post Share on other sites More sharing options...
dling Posted January 5, 2010 Posted January 5, 2010 You can go to your motherboard manufactures web site, go to the forums and see what others with the same mb recommend or are setting theirs to. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now