kingdingeling Posted January 22, 2010 Posted January 22, 2010 That stuff is epic, can't wait for more pictures! Share this post Link to post Share on other sites More sharing options...
tkrow21 Posted January 22, 2010 Posted January 22, 2010 That is beyond impressive. Share this post Link to post Share on other sites More sharing options...
Boinker Posted January 22, 2010 Posted January 22, 2010 love it. please continue..... Share this post Link to post Share on other sites More sharing options...
Miek Posted January 25, 2010 Posted January 25, 2010 WOW! THAT IS AWESOME! Share this post Link to post Share on other sites More sharing options...
p0Pe Posted February 8, 2010 Posted February 8, 2010 soon;) Share this post Link to post Share on other sites More sharing options...
p0Pe Posted February 11, 2010 Posted February 11, 2010 New sponsors!!! Thanks to www.coolbits.dk www.noiseblocker.de www.matronics.dk www.bitspower.com for helping me out on this project! And so it began! i started out with about 2.5 square meters of acrylic, and now have little left. I would like to thank my new sponsors, www.matronics.dk for sending me some AWSOME light for this project! f#ck ccfl Share this post Link to post Share on other sites More sharing options...
p0Pe Posted February 11, 2010 Posted February 11, 2010 Now for the fun part. I had to solder the correct cables to each of the 24 pin connector, since they were made with different lengths. Say hello to mister happy solder station! slowly, but certanly getting all the buggers on, and applying heatshrink on each, so that i wont have any fires in there -.- fans will have an output port like this: and the pump will have a slightly different one here: some of you have seen this pic: The thing that was in homers background is this: And it will be mounted like this on the backplate And how it was put on. I tapped 4 mm holes and used some black dome head 4 mm bolts i have. The dome head bolts will also be used on the front. And as you can see, the 24 wires is taking up quite a bit of space in the cable tray:/ dont know if i will be able to fit the 12 wires for the 6 pins, but i have to:D The fans also got some love And the 8 pin got sleeved. This will also be done to the 24 pin, and 6 pins. The little buggers in front is the clips that i had to use, to get the extender. took some time to get done, but it will be worth it! i think that was that for this update:) Next time i will have some more goodies to show you, some of them from my new sponsor, and a little something something that i got made instead of the res i have now;) worth the wait? If not, ill update again in a week or so;) Share this post Link to post Share on other sites More sharing options...
airman Posted February 11, 2010 Posted February 11, 2010 excellent. I love build threads like these Share this post Link to post Share on other sites More sharing options...
rmb938 Posted February 12, 2010 Posted February 12, 2010 god I cant wait to see 5000 pics of the finished project. Share this post Link to post Share on other sites More sharing options...
kingdingeling Posted February 12, 2010 Posted February 12, 2010 Good stuff, keep it up! :thumbs-up: Are you gonna run the mobo wires behind the motherboard tray and then directly solder them onto the PSU? Share this post Link to post Share on other sites More sharing options...
p0Pe Posted February 12, 2010 Posted February 12, 2010 thanks dudes:D kingdingeling, no they go out of the 7 plugs as described in the log. then you plug the psu in those:) it will be easier to imagin when i get the case rivited back together:D Share this post Link to post Share on other sites More sharing options...
p0Pe Posted February 15, 2010 Posted February 15, 2010 just to keep you in suspense, here is a little teaser:P Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now