Jump to content

Ghost In Comp


Recommended Posts

hi all, having a problem with my dads gaming computer i built for him a few years ago, i had hes comp overclock almost since he got it running good, as of late he ask me to put everything at factory settings so i did, then we baught gta 4, it was running to so for him so he ask me to bump the system back up, doing so i did, but what do u know a get the famous bsod, he system never used to do this before i know hes computer inside and out, my usual settings are fsb258x12 vcore 1.578v offset 100mv httx4 ram divider /6 pc6400 5.5.5.15 2T 1032mhz 2.35v, when hes system was fine i ran prime for 6 hours fully stable no errors, now i cant even go past 210fsb, is hes cpu dieing

 

hears hes system specs thanks

m2n sli deluxe nforce 570

amd athlon 64 5000+ 2.6ghz g1 arctic freezer pro 64

ocz stealth stream 600watt

ozc pc6400 2gb kit

evga ssc 8800gt 512mb

19inch samsung monitor

76gb wd raptor 16mb cache

160gb wd sata II

samsung dvd burner

enermax charka mid tower

3x neon 80mm fans front, 250mm side fan, 120mm back

Share this post


Link to post
Share on other sites

the vcore is a little high you could have slowly nuked the cpu. also you make no sense. you need to fix your whole post sorry but i really cant make out the last part.

 

offset 100mv httx4 ram divider /6 pc6400 5.5.5.15 2T 1032mhz 2.35v

Edited by capthowdy575

Share this post


Link to post
Share on other sites

That -is- a lot of voltage for a system with just mediocre air cooling. I don't know if I'd say for sure that it's hurting the CPU, but it's certainly a possibility. If you didn't have the board set to throttle or shutdown when temps got high, it might have slowly worn down.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...