Jump to content

Help Overclocking Quad9450-mushkin Ddr3 1600mhz 1.8-1.9


depecheboy
 Share

Recommended Posts

HI ..

After yesteday my pc works fine with the OC.. i have a quad9450 and i OC it at 3.2ghz. But then i read that this quad can increase at 3.5ghz without problem.

So i test with different values in many components. like memories, vcore, etc...

My problem is that my pc dont recognized anything now.. i change the values many times but when i execute cpu-z its only recognized the default values of the quad 9450: 2.66mhz.... i dont know what to do,,i try with many combinations but i cant increase again all the values of my quad 9450 and my memories.

this is my pc:

 

-Core2quad 9450

-Motherboard: Gigabyte EP45T-EXTREME

-DDr3 Mushkin 996629 2x2gb 1.8-1.9v

-AtiRadeon 4870 512mb

-Cooler: Coolermaster Hyper 212

-Power supply: NeoPower 650w Blue

-Case: Nine Hundred Antec

Edited by depecheboy

Share this post


Link to post
Share on other sites

HI. i take some pictures of my bios... as you can see,, i OC..many items..but the pc dont recognized,, if i test with cpu-z only figure 2.66mhz... and the memory with 333mhz.

if i go to MYPC. right button, properties its the same.. only figure 2.66mhz..

please help me :unsure:

post-64478-1224269670_thumb.jpg

post-64478-1224269690_thumb.jpg

post-64478-1224269704_thumb.jpg

post-64478-1224269716_thumb.jpg

Share this post


Link to post
Share on other sites

For 3.6ghz this is what I have my voltages at.

 

Cpu voltage 1.26 For 3.8 I need 1.34

NB voltage is stock at 1.33

CPU Vid voltage is 1.26

 

I set your ram at the stock settings and voltages for now.

 

Turn off speedstep, C1E, and all that other junk.

Edited by troy5061

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...