SOLEDADMAN Posted April 12, 2008 Everytime I plug a 2.0 usb Flask disk to my mobo, it always report that there is no HIGH-Speed USB port on my PC, the speed is only 1.1 . I don't know why. Please help me. this have happened for 1 year. Quote Share this post Link to post Share on other sites
SOLEDADMAN Posted April 14, 2008 any one helps me please!! Quote Share this post Link to post Share on other sites
bldegle2 Posted April 14, 2008 Device manager>Universal Serial Bus Contoller>Look for Standard Enhanced PCI to USB Host Controller Enhanced is what you need for 2.0 operations. Also, do you have USB 2.0 toggled 'on' in the bios? If there are any yellow exclamation marks on the USB stuffs, right click and selct update driver, that usually does the trick.. laterzzz................. Quote Share this post Link to post Share on other sites
sunnyeagle Posted April 14, 2008 Or you can uninstall it ( from the device manager) and reboot. Windows should pick it up and re do it with 2.0 . Check bios like "bldegle2" said. Quote Share this post Link to post Share on other sites
MACarter02 Posted April 14, 2008 Is your operating system windows 2000 SP4, or windows XP SP2 or higher? Quote Share this post Link to post Share on other sites
SOLEDADMAN Posted April 15, 2008 Thanks all , I Looked for Standard Enhanced PCI to USB Host Controller but it's appear. I use XP SP3 . Quote Share this post Link to post Share on other sites
SOLEDADMAN Posted April 15, 2008 her her, it's ok now, thanks all again Quote Share this post Link to post Share on other sites
wevsspot Posted April 15, 2008 Sole, Ok to mark this thread as "resolved" then? Quote Share this post Link to post Share on other sites
