gadder Posted April 2, 2008 Posted April 2, 2008 Sorry about that should have posted a bit more detail: fbb = 300 or actually comes out at 301.3 hammer fid = 9.5x htt= 3x ram is on a multiplier 166mhz: 10:12? i guess. Vcore 1.44v Cheers sharp, I will give those a go and see if i can edge a few more mhz out of it. Trfc is set to the lowest all redy... 14. Share this post Link to post Share on other sites More sharing options...
gadder Posted April 7, 2008 Posted April 7, 2008 Hey Guys, Thanks for all your help. I managed to get to 2.85ghz stable on the cpu @1.45v after a bit of testing, but only managed to get to 524mhz on the ram with trying sharps other timings, managed to clock it a little higher but had to lower the cpu slightly with dividers so ended up with less performance...didnt realise how much of a bottleneck the cpu is for 3d stuff. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now