Jump to content
Sign in to follow this  
Specialistx

no post after fiddling with oc, 2 leds w/crazy fans

Recommended Posts

so i thought everything was going nice and well after my previous thread with the issue on the bios here:

 

http://www.diy-street.com/forum/showthread.php?t=82524

 

so anyways, things were going pretty well with vista. i havent run into any problems with it so i decided to do a little ocing. first i started with raising the speeds from stock setting of 200mhz to 220mhz. then tried loosening timings to 2-3-3-10 and raising the speed to 250mhz. ran stable, and i tried my luck with going 270, but restarts on its own on random and wont get past windows splash. i then went on to try to raise the cpu core voltage from 1.4 to 1.6. the problem is that i couldnt really find out where that was exactly in the bios. there was only one thing that was even remotely close to it, and that was the chipset vid whatever, and it was set at 1.4. i upped it to 1.5, saved and exit, and now it just gives me the 2 leds with crazy fans. it doesnt make any beeping noises. i followed the exroadie clear cmos procedure and had no luck. please help!

Share this post


Link to post
Share on other sites

If you're running the DFI NF4 Ultra-D, the vCORE (Processor Voltage) is going to be listed in "Genie BIOS MENU". It's listed as "CPU VID Control" in that menu. Check out this review and it will show you screenshots, and maybe read it alittle and you might get a good understand somewhat. Good Luck!

 

http://www.hardocp.com/article.html?art=Nz...GhlbnRodXNpYXN0

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...