Monkman Posted January 5, 2008 Posted January 5, 2008 Hi all, Previous to installing my new OCZ 700watt Game Stream everything worked great. Now that i've installed it, I get a "Detecting array" hang up. These are my specs: K8N nforce4 SLI platinum 3500+ amd athlon Lite-ON dvd/cd drive Bios 4.84 200g HD I do NOT have a raid set up and it is disabled in bios. When I disconnect the dvd drive she'll boot up fine. So I narrowed the problem (i think) to the dvd drive. Before installing the new PSU it was plugged into the secondary IDE cable as master. Now with the new PSU I get that "detecting array" hang up. I've tried different connection variations but it either will: 1) Not even get past initial boot sequence 2) Get hung up on 'detecting array...' 3) Load everything except the dvd drive Any help would be greatly appreciated. M Monkman Quote Share this post Link to post Share on other sites More sharing options...
kitfit1 Posted January 7, 2008 Posted January 7, 2008 Have you tried another IDE cable ? Quote Share this post Link to post Share on other sites More sharing options...
Monkman Posted January 7, 2008 Posted January 7, 2008 Yah, tried that. I tried setting it to slave as well and putting it on the same IDE as the HDD and I got nothing. At this point I'm thinking it's dead, but I can't for the hell of me think how that's possible by just installing a new PSU. I went through my BIOS again and again and there's no where I can see where I can select CDROM and force it to detect it either. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.