Silva Posted December 3, 2007 Posted December 3, 2007 I've been having this un-tracable problem with my rig not even getting to POST. The fans on the video card are spinning on high like they usually do for a few seconds but it just hangs at that step where the video card is usually initialized. I know it's not the video card because I've swapped that out for a known working one. I've also cleared the CMOS for a VERY long time. I've also RMA'd the following already: Processor PSU Mobo The only remaining factor is the RAM so I'm wondering if this could create such a problem. I get no diagnostic beeps. All LED's on the board are normal. Like I said, it just hangs where I usually get some video card information on the screen before POST. The problem started when I was in Vista doing nothing demanding and the whole machine powered off suddenly. *EDIT* I should add that I have 4X1GB DDR2 800MHz Corsair XMS2 RAM on the way already.. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.