Jump to content
Sign in to follow this  
NetSpider

windows won't boot +memtest86 error ,New memory pic inside

Recommended Posts

img1363hi7.th.jpg

img1364hp6.th.jpg

 

Well , just got those , swapped with my 2x512 with those 2x1GB .

 

windows won't boot memtest full of errors .

faulty mem ?

or maybe Ultra-D don't support High density memory ... ?

Share this post


Link to post
Share on other sites

never seen that memory. DFI boards can have issues with some kinds of memory. it could be as simple as manually adjusting memory settings in the bios, or it could be an incompatability issue.

 

you may want to check directly with the mem manu to see if they can offer any insight to the 1 gig modules.....

 

BTW, i noticed your PS is not up to DFI's minimum 480watt level, there is a thread on DFI recommended power supplies here at the forum(a quick search....), i strongly suggest you get the PS upgraded to eliminate that as a potential problem.

 

Also, you may have to kick up the memory VID a bit to get the 2 gig stable, you can test this theory with memtest after bumping up the voltage a bit and/or adjusting the timings...

 

laterzzz

Share this post


Link to post
Share on other sites

Try these settings with the memory in the orange slots.

GENIE BIOS Setting >DRAM Configuration

DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01)

Command per clock (CPC)..............Disabled

Cas latency (tCL)....................3

RAS to CAS delay (tRCD)..............3

Min RAS active time (tRAS)...........8

Row precharge time (tRP).............3

Row cycle time (tRC).................11

Row refresh cycle time(tRFC).........14

Row to Row delay (tRRD)..............3

Write recovery time (tWR)............3

Write to read delay (tWTR)...........AUTO

Read to write delay (tRWT)...........AUTO

Refresh period (tREF)................AUTO

Write CAS latency (tWCL).............1

DRAM Bank Interleave.................Enabled

 

DQS Skew Control.....................AUTO

DQS Skew Value.......................0

DRAM Drive Strength..................AUTO

DRAM Data Drive Strength.............AUTO

Max Async Latency....................6ns

Dram Response........................Normal

Read Preamble Time...................5ns

Idle Cycle Limit.....................AUTO

Dynamic Counter......................AUTO

R/W Queue Bypass.....................AUTO

Bypass Max...........................AUTO

32 Byte Granularity..................AUTO

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...