Jump to content
Sign in to follow this  
ghostfacekilla

temps high ???

Recommended Posts

after reading other threads im begining to think maybee my temps are to high , my opty is not o/c much its @ 1980 mhz a 10% oc , as for my temps they are at the minute going off everest 36 c idle and after about 1hour of BF2142 it rises to about 42 c , with the M/B temp at 39..... is this high

i have a TT Armor with a Yateloon 120mm intake with a 80 + 2 x TT 120cm on my rad pushing through and out the front exhaust fans with 1 x 120 Yateloon inside blowing over the top left of m/board , i did have a spare side pannel with a 250mm intake fan on which used to help with the m/b temp but the fan has stopped working and im having trouble replacing it

 

My GPU Diode is @ 67 c is that high ??

 

Also im planning on upgrading to a C2D E6600 system soon so i will be getting a new m/b and ram as well , hopefully the m/board will be either a evga 680sli , xfx 680sli ,i am in the prosess of buying a Tuniq tower but i was wandering if my water cooling gear would be up to the job of cooling a E6600 hopefully o/c to about 2.6 - 3.0

Share this post


Link to post
Share on other sites

The GPU temp is well within reason.

 

What is your ambient room temp? I'm not sure how well the XSPC rad performs; but it may need high cfm fans to be most effective. Also, the Hydor L20 is a pretty small pump and doesn't produce as high a flowrate as the D5. All these can be a factor in the high idle temp.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...