ghostfacekilla Posted September 7, 2007 Posted September 7, 2007 after reading other threads im begining to think maybee my temps are to high , my opty is not o/c much its @ 1980 mhz a 10% oc , as for my temps they are at the minute going off everest 36 c idle and after about 1hour of BF2142 it rises to about 42 c , with the M/B temp at 39..... is this high i have a TT Armor with a Yateloon 120mm intake with a 80 + 2 x TT 120cm on my rad pushing through and out the front exhaust fans with 1 x 120 Yateloon inside blowing over the top left of m/board , i did have a spare side pannel with a 250mm intake fan on which used to help with the m/b temp but the fan has stopped working and im having trouble replacing it My GPU Diode is @ 67 c is that high ?? Also im planning on upgrading to a C2D E6600 system soon so i will be getting a new m/b and ram as well , hopefully the m/board will be either a evga 680sli , xfx 680sli ,i am in the prosess of buying a Tuniq tower but i was wandering if my water cooling gear would be up to the job of cooling a E6600 hopefully o/c to about 2.6 - 3.0 Share this post Link to post Share on other sites More sharing options...
radodrill Posted September 7, 2007 Posted September 7, 2007 The GPU temp is well within reason. What is your ambient room temp? I'm not sure how well the XSPC rad performs; but it may need high cfm fans to be most effective. Also, the Hydor L20 is a pretty small pump and doesn't produce as high a flowrate as the D5. All these can be a factor in the high idle temp. Share this post Link to post Share on other sites More sharing options...
ghostfacekilla Posted September 7, 2007 Posted September 7, 2007 a new pump is on my shopping list but its at the bottom , cheers for the reply Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now