CharmedLover84 Posted July 30, 2007 Posted July 30, 2007 ::Sighs:: back to stock... AGAIN.... Settings are as follows: [b]System Clocks[/b] CPU Freq, MHz ----------- (3000) FSB MHz ----------------- (1333) CPU Multi ---------------- 9 PCIe 1 ------------------- 100 PCIe 3 ------------------- 100 PCIe 2 ------------------- 100 SPP <-> MCP Ref Clock --- 200 nForce SPP-->MCP ------- 5x nForce SPP<--MCP ------- 5x CPU Spectrum ------------ Disabled HTT Spectrum ------------ Disabled PCIe Spectrum ------------ Disabled [b]FSB & Memory Configuration[/b] SLI-Ready RAM ----------- Disabled FSB-Mem Clock Mode ----- Auto FSB-Mem Ratio ----------- Auto FSB (QDR), MHz ---------- Auto (1333.3) Actual FSB ------------ (1333.3) Mem DDR, MHz ----------- Auto Actual Mem ----------- (800) [b]Memory Timing Settings[/b] Mem Timing Setting ------ Expert CAS Latency ------------- Auto (5) tRCD -------------------- Auto (5) tRP ---------------------- Auto (5) tRAS -------------------- Auto (18) CPC CMD ---------------- Auto (2T) Advanced tRRD -------------------- Auto (3) tRC --------------------- Auto (24) tWR -------------------- Auto (5) tWTR ------------------- Auto (9) tREF -------------------- Auto (7.8us) [b]CPU Configuration[/b] Limit CPUID Max --------- Disabled Intel SpeedStep --------- Disabled xPPM Mode ------------ (Native Mode) CPU Thermal Con. ------- Disabled C1E Enhanced Halt ------ Disabled Execute Disable Bit ------ Disabled Virtualization Tech. ------ Enabled CPU Cores -------------- All Enabled [b]System Voltages[/b] CPU Core --------------- Auto (1.3375V) CPU FSB ---------------- Auto (1.2V) Memory ----------------- Auto (1.85V) nForce SPP ------------- 1.3V nForce MCP ------------- Auto (1.5V) HT SPP<->MCP ---------- Auto (1.2V) If this SOB doesn't pass I'm going to start with the motherboard and work my way up on RMAs cuz I have officially freakin' had it. Share this post Link to post Share on other sites More sharing options...
HITandRUN Posted July 30, 2007 Posted July 30, 2007 Yeah... don't think that's it either. I tried booting up with it set to 1066 with the CPU Speed equaling 3.2GHz with voltage on auto and it wouldn't even boot up at all, POST beep then nothing. I can't install my BT because I can't find the fan screws for it... not to mention the base is all nasty and I already tried cleaning it with a tooth brush and that didn't help... I'm just very frustrated right now, I think me redoing the thermal paste did more harm than good, I dunno... this just sucks, all I wanted was to have a system I'd be happy with at stock and I can't even have that in peace apparently. ::sighage:: I'm back at stock at whatever voltage it has set for me... dunno... guess tomorrow/right now I'll set it for Prime and hope it lasts more than a few hours. 'specially since I have to go to bed soon cuz of work in the morning. Go to sleep and take another shot at it tomorrow. You won’t be able to get nothing done with all the anger in your belly. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted July 30, 2007 Posted July 30, 2007 Well obviously my thermal paste job didn't do too badly, temps are hovering back and forth between 45Cish & 53Cish... And I also posted my problems on eVGA's boards, hopefully between there and here I can get this resolved, assuming it doesn't pass Prime95 and ease my mind, at least about stock speed... Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted July 30, 2007 Posted July 30, 2007 And I just found out that, unless I missed it, my RAM isn't on the officially supported list for this board, doesn't that make me feel great... if I haveta return this RAM and get new sticks I'm really gonna be a bit angry... Course if I have the money, I'll buy the new sticks first then RMA these... ::Checks to see if they're refundable from newegg:: Share this post Link to post Share on other sites More sharing options...
oc newbie Posted July 30, 2007 Posted July 30, 2007 I am sure you already tried this but that ram is rated for 2.0-2.2 volts and with the hard freezes, at least for me, it has been from ram the majority of the time. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted July 30, 2007 Posted July 30, 2007 Well, following the advice of EVGA peeps, I did a BIOS update (Dunno why I didn't think of that myself since this processor is brand f'in new) to the 7/11/07 BIOS. I also set my RAM to 2.0V even though it' should need that much voltage at 5-5-5-18-2T @ 800MHz. Gotta update my siggy to reflect the current settings... honestly I'm tempted to try an OC again, probably will. If it don't work, the next step will be to get different RAM I think. Share this post Link to post Share on other sites More sharing options...
Splave Posted July 30, 2007 Posted July 30, 2007 you werent running p30 bios!???! Man, I could only boot stock with p28 or p29. I mean if I touched something it wouldnt prime. Im sure you will have better luck now. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted July 30, 2007 Posted July 30, 2007 SON OF A ... SIX HOURS AND NINETEEN MINUTES and it failed SO CLOSE Some peeps on eVGA boards suggested some of my voltages are too low and that might be a problem, obviously it is... guess I'll reboot, up them a bit, and try again... Least it made it past 6 hours without freezing I'm getting close ::checking the logs for temps:: BAH my logging for Everest wasn't working... I'm sure temp wasn't the problem though cuz it was fine when I left after it was running for an hour. Share this post Link to post Share on other sites More sharing options...
Darkorb Posted July 30, 2007 Posted July 30, 2007 k this is getting very confusing your swapping way too much to see stable at 3.33 and 3ghz. just try setting the voltage to stock, 1.35v and test it at 3ghz (which is stock i presume) then once thats stable, then go up to 3.33, ur jumping around way too much Share this post Link to post Share on other sites More sharing options...
Praz Posted July 30, 2007 Posted July 30, 2007 Good point. But then that seems to be Charmed's normal modus operandi. Can't build a mansion without a solid foundation. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted July 31, 2007 Posted July 31, 2007 3.333GHz @ 1.4Vs in BIOS (1.32V reading out) stable, 11hrs, 45mins of Prime95x4... will have an ocdb entry up for it by the end of the night. Share this post Link to post Share on other sites More sharing options...
Splave Posted July 31, 2007 Posted July 31, 2007 great news! success Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now