Jump to content

C1 Post with OCZ2P800LP2GK

Recommended Posts

hallo, i bought the dfi lanparty ut nf590 SLI-M2R/G and specially for the board the OCZ2P800LP2GK. at every bootattempt the LED Post shows C1, i think this is a problem with the RAM, but why don´t run this special ram for this board???

sorry for my bad english and thank you for help


DFI Lanparty UT nf590 SLI-M2R/G

AMD ATHLON 64 X2 5400+

2x OCZ Platinum edition 1GB PC-6400 DFI Special

Gainward Bliss 8600GTS 512mb

Corsair Hx520W

Share this post

Link to post
Share on other sites

Yes C1 is the code for Ram . Try reseating your Ram and/or moving to the other two slots and see if that helps. if not you may hve a bad set of dimms, try another set if you have them and see.




AMD Athlon 64 X2 4800

Abit AN8 32x SLI

2x1gb GSkill DDR 500 Cas3

XFX Geforce 6600gt 128

1 160gb WD Sata

1 80gb WD Sata

2 Liteon Sata Optical Drives

19' Widescreen Hans-G LCD Display

Antec P180 Series Case

FSP Epsilon 600w

Buffalo 320gb Nas

Share this post

Link to post
Share on other sites

Try booting with one stick of ram installed. If it boots set the ram voltage to the proper value as specified for the ram. 2.2V I believe. Save, shut down and install second stick.

Share this post

Link to post
Share on other sites

  • 4 weeks later...

I see that this is an old post from last month..


I have the same motherboard, same RAM, same PROBLEM...lol


Anyone know where I can get a list of what the codes mean? Til now I didnt know where to start my troubleshooting...and yes I will be setting my voltage to 2.2!



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...