dadong Posted May 21, 2007 Posted May 21, 2007 hi there, i'm new to watercooling. i'm just wonder if this is a good parts list and if everything can actually fit together. i'm not sure about the rad. what is the best one to use with 79cfm antec tri cool fans. i'm thinking about the DD GTS stealth 240. but i've been wondering how much better the GTX xtreme 240s are...... also which one is better the d-tek fuzion gfx or the DD Maze4 so far i looked around and went with this setup CPU block: d-tek fuzion) GPU block: (d-tek fuzion gfx or DD maze4) chipset: swiftech mcw30 Rad: so far (DD GTS stealth 240) Pump: laing D-5 reservoir:swiftech MCRES-MICRO eveything is gonna be 1/2" barbs with 7/16" tubing also i'm not too sure what to do about the coolent. what do you guys recommend. also i have a TT armor and my wiring is pretty good so i've got alot of room. i will get pics up soon. Pics: with this i'm now considering a triple rad. i've got quite a bit of space. Share this post Link to post Share on other sites More sharing options...
radodrill Posted May 21, 2007 Posted May 21, 2007 Welcome to the Street! Parts list looks good. You might also consider using a T-line rather than the res. Another good GFX block to consider is the Swiftech MCW-60. For the CPU block the Swiftech Apogee GT (or GTX) is also a solid choice. In case you don't know this, petrastechshop.com has a broader selection than DangerDen does and the prices are generally less. Share this post Link to post Share on other sites More sharing options...
watsonte Posted May 21, 2007 Posted May 21, 2007 In regards to Radiator and the fans your currently going to pair with it, the Stealth series is meant for low noise low CFM fans, you wont need a very powerfull fan to get great results using the Stealth GTS. Either way the Stealth GTS would be the better of the two as neither will really cool significantly better than the other. Also Im not certain as to what skt your setup is, so I would recommend the DD TDX with a Universal top, you could use it on anything from 939, AM2, or 775 Share this post Link to post Share on other sites More sharing options...
mknwatt Posted May 21, 2007 Posted May 21, 2007 For the tubing, ID 1/2" - OD 3/4" is what I use. If you go with the thinner OD tubing you might get kinking in tight corners and will have to use a anti-kink smartcoil. Make sure your fittings match the tubing. Now for the liquid, I go with distilled water mixed with MCT-40. I have seen a lot ppl using fluidXP. You could use an auto anti-freeze too. Using a mix allows the pump to get some lubrication, pure water is a better cooling medium but has little lubrication (longer pump life). A additive will also help control algee growth. I've heard that some res will make noise. Go with a T-line setup without the res. Share this post Link to post Share on other sites More sharing options...
CPDMF Posted May 21, 2007 Posted May 21, 2007 I'm still waiting for a response back from DTek on the fusion gfx, the website lists it has having a 6.8 PSI pressure drop which would make it to restrictive in full loop. Here's to hoping it was typo otherwise I would have to go with a maze4. Share this post Link to post Share on other sites More sharing options...
dadong Posted May 21, 2007 Posted May 21, 2007 thanks guys i've been hearing that the fuzion cpu is one of the best blocks on the market. i heard it even beats the swiftech storm. is the scythe s-flex 49cfm good for GTS. also how future proof is the GTS?? i'm planning it to use the LCS for future setups ie: K10 / R600 / 8800 on the other note i live in north vancouver BC in canada so i'm ordering mostly off NCIX or else shipping fees will kill me. Share this post Link to post Share on other sites More sharing options...
carholmes Posted May 21, 2007 Posted May 21, 2007 If the Fuzion GPU is too restrictive for your liking, you should consider the Swiftech MCW-60 since its the only other GPU only block that supports G80. Share this post Link to post Share on other sites More sharing options...
watsonte Posted May 21, 2007 Posted May 21, 2007 thanks guys i've been hearing that the fuzion cpu is one of the best blocks on the market. i heard it even beats the swiftech storm. is the scythe s-flex 49cfm good for GTS. also how future proof is the GTS?? i'm planning it to use the LCS for future setups ie: K10 / R600 / 8800 on the other note i live in north vancouver BC in canada so i'm ordering mostly off NCIX or else shipping fees will kill me. Anything that outputs about 30CFM works with the GTS, and its pretty future proof, It will cool anything you want to throw at it... I used it in configurations with dual GFX, single and still cooling CPU and it temps never reached anything higher that 44C. Its a great radiator if your looking for something to help keep noise levels to a minimum. Share this post Link to post Share on other sites More sharing options...
dadong Posted May 21, 2007 Posted May 21, 2007 sounds good....i think i'll go with the GTS and out of curiosity what is the best CFM for the GTX.... finding info on LCS parts is a pain so it's best if i ask here. Share this post Link to post Share on other sites More sharing options...
watsonte Posted May 21, 2007 Posted May 21, 2007 sounds good....i think i'll go with the GTS and out of curiosity what is the best CFM for the GTX.... finding info on LCS parts is a pain so it's best if i ask here. Really this is only a semi-educated guess, but the two raditor differ by 10 fins per inch. The GTS has 30 FPI, the GTX has 20 FPI, so I would say something around 50CFM, but in all honesty if the environment the PC is in is fairly cool, something in the 35 - 45 range should be more than adequate. Share this post Link to post Share on other sites More sharing options...
dadong Posted June 1, 2007 Posted June 1, 2007 i've got images posted up. got a few questions. is it a very bad idea to use plumbing parts as T Barbs? and etc.. also is it gonna damage the pump if it mount it inverted? Share this post Link to post Share on other sites More sharing options...
radodrill Posted June 1, 2007 Posted June 1, 2007 i've got images posted up. got a few questions. is it a very bad idea to use plumbing parts as T Barbs? and etc.. also is it gonna damage the pump if it mount it inverted? PPL often use plumbing fittings (i.e. teflon Ts) Mounting the pump inverted won't cause any problems; just be sure that you don't run it dry. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now