Darkorb Posted April 24, 2007 Posted April 24, 2007 Sup every1, dont no if there is already a part of the forum for this, and if there is, sorry I just wanted to see every1's idle/load temps - I figured out my temps by running 10 minutes of ATI Tool scanning for artifacts Here are my temps Fans running full - Sounds like an airplane CPU - 37/45 Mobo - 34/35 GPU - 50/69 GPU MEM - 61/63 GPU VRM - 54/64 Seagate - 31/31 Now, all fans running quiet, can barely hear the computer on. CPU - 39/50 Mobo - 35/39 GPU - 50/71 GPU MEM - 61/63 GPU VRM - 55/66 Seagate - 34/38 My fan setup is, 2 vantec stealth intake fans, 92mm each. 120mm Antec Tri-cool exhaust. Cpu heatsink is stock, and VF-700ALCU for my gfx card. You think i should put fans on full or keep em on low? Front 2 fans have high/low Share this post Link to post Share on other sites More sharing options...
Technohydra Posted April 24, 2007 Posted April 24, 2007 Can't say for a lot of components, but my C2D is under an XP 120 with a silent fan, 31 idle, 41 load. 300x6, at 1.200 volts. Share this post Link to post Share on other sites More sharing options...
Prospector Posted May 6, 2007 Posted May 6, 2007 Since my Coolit Systems Eliminator went back for RMA I put my trusty TT Big Typhoon back in this time with a Panaflo 115 cfm fan. At 356x9 1.431v Ambient 19c With fan control on auto in bios the fan only comes on when gaming or Orthos etc typing this the fan is off 35-36c.I am using 4 other Antec Tri-cool 120mm fans (2 intake 1 rear exhaust 1 window mounted blowing on 8800GTS and 1 200mm top exhaust. Not silent but very acceptable. Edit: I noticed CoreTemp was off by about 4c so I used SpeedFan calibrated to match TAT. Now idles at 39-40 Share this post Link to post Share on other sites More sharing options...
RobNyc Posted May 8, 2007 Posted May 8, 2007 Currently .. Opteron 165 @ 2.25ghz (250x9.0) under Opteron 275 HSF .. Antec Case back 120mm fan + 2x120mm front fans connected to psu fan connector (fan speed are on high and must be high if connected to psu fan connectors) but they sound super silent cant eve hear the pc on. 33c idle 42-43c full load <33 my case .. going to replace my HeatsinkFan soon to have proper stuff Share this post Link to post Share on other sites More sharing options...
Prospector Posted May 9, 2007 Posted May 9, 2007 When I gave my 165 Opty and SLI-DR to my son I put the 4-pipe Opteron cooler on it.(I was using the TTBT on it).He runs it at 300x9 load temps barely hit 40c when he's playing games. Share this post Link to post Share on other sites More sharing options...
Oceanborn Posted May 9, 2007 Posted May 9, 2007 I idle at 38ºC and load at 50ºC on orthos Share this post Link to post Share on other sites More sharing options...
ebdoradz Posted May 10, 2007 Posted May 10, 2007 main rig in sig cpu 31/43 chipset 36/45 pwm 33/42 usualy running at 37-38°C when playing BF2 Share this post Link to post Share on other sites More sharing options...
Oceanborn Posted May 10, 2007 Posted May 10, 2007 Question for the cooling experts here...before when I had an Athlon x2 people usually recommended to have the temperatures of the core below 50ºC for constant use(not talking about record overclocks here) So what's the safe temperature for the Core2 Duos for 24/7 use?? Share this post Link to post Share on other sites More sharing options...
RobNyc Posted May 12, 2007 Posted May 12, 2007 Where do you guys get better temps in XP, 2k3, or Vista? or even Linux Share this post Link to post Share on other sites More sharing options...
iamkoza Posted May 13, 2007 Posted May 13, 2007 You think i should put fans on full or keep em on low? Front 2 fans have high/low Pick up a fan controller so that you can put your fans on quiet mode whil not gaming and turn them on full blast while gaming Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now