UserX Posted April 12, 2007 Posted April 12, 2007 Hello Once again, I would like to know if there are vets around that can help me locate a few good articles on the Cold boot issue. I recently changed cases to a SM Stacker 832 and am now getting cold boot (lights turn on, fans attempt to spin then the lights go out accept RAM and Standby all within 1 sec.). I have tried resetting the CMOS for 8hours; reloading the rails, turning power off at the PSU, unplugging the PSU and put a 22uf cap in parallel with the pwr switch leads. Everything worked fine until moving to this case. I have gone as far as to test the PSU under load and the switch on the case with another board. Everything checks out good. Thank you. Share this post Link to post Share on other sites More sharing options...
UserX Posted April 12, 2007 Posted April 12, 2007 I have decided to leave DFI for good. Thanks for the help that I did recieve. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now