Jump to content

Weird crashing


Recommended Posts

Ok here goes!

 

With the spec in sig I get strange lock ups tho only while running orthos stress test can be 2mins or 4 hours into it the pc locks up nothing shows as failed at all and get screaching from the speakers (sort of noise the old commadores used to make while loading)

 

Everything else runs fine can game for 8 hours solid work on it is fine same deal if I run it stock or overclocked

 

Also If i install the duel core patch it will randomly just turn off if I emove it this goes away

 

I have tryed all kinds of combinations of bios and memtesting all night is fine lol

 

Anyone with any idea as what this could be would be a star its getting on my nerves now

 

Thx in advance

 

Dean

Share this post


Link to post
Share on other sites

Still doing it tryed 4 different bios including the latest dfi one from there website

 

Still just locks up randomly during stress testing using orthos or prime95, tho all other benchmarks fly, can game and work on it all night long lol

 

Starting to wear me down now nothing seems to make a difference

Share this post


Link to post
Share on other sites

Try lowering your overclock or changing your settings. It could be secondary RAM timings or more vcore or a bump to your RAM voltage.

Did you perform full CMOS clear after flashing BIOS?

What are your temps that CoreTemp is reporting?

Share this post


Link to post
Share on other sites

Yeah I did a full clear its the same at stock or overclocked volts doesnt seem to make any difference

 

Memtest shows as fine too left it all night it passed with flying colours

 

Been messing about today and found this

 

If I just put 1 dimm in the orange slot closest to the cpu it wont boot and just beeps same with both dimms

 

If i put one in the second orange one the one furthest away it boots and primes fine coming up to 4 hours now and the other dimm I did for 3

 

thats at stock and at 3ghz

 

if I put both in it boots runs fine just prime freezes it

 

so im wondering if the mb is borked or the memory controller on the cpu

 

Friends loaning me a ati dfi board tonight and his ram and cpu so i can test each bit seperatly

 

core temp at stock reads 42 per core after about an hour

 

at 3ghz it gets to 52 tops per core

Share this post


Link to post
Share on other sites

The following are valid configurations for ram installation. Any other configuration will not work.

 

One stick of ram in the yellow slot furthest from the Processor.

One stick of ram in the orange slot furthest form the processor (preferred).

One stick of ram in the yellow and orange slots furthest from the processor.

One stick of ram in both yellow slots.

One stick of ram in both Orange slots (preferred).

One stick of ram in each of the four slots. The success of this is dependent on the memory controller.

 

If Windows was installed using a bios that does not support DC processors I would consider a reinstall.

Share this post


Link to post
Share on other sites

I solved my problem yay!

 

now 12 hours prime stable at 3ghz 1.4v

 

Thx for the help offered :)

 

Turned out that I had to lower the vdimm to 2.54 which is below the rated which is odd and all the issues vanished lol

 

Once more thx to those who gave suggestions

 

Regards

Dean

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...