Jump to content
Sign in to follow this  
SupeRClockeD

Vc-re Install

Recommended Posts

it seems this chipset fan is making contact with my GPU card

resulting in a horrible noise... its possible to squeeze it so it wont make contact but after a while...it will make contact once more...

 

ideas any1 ?:mad:

Share this post


Link to post
Share on other sites

nop not using any foam but i'm not sure it would help since this Hs dosent fit the board holes 100% but its worth checking...

 

and HR-05 SLI looks like overkill whats your temps on load ?

Share this post


Link to post
Share on other sites

I was wondering if the padding could be causing your problem, not that you should put it on.

 

My load barely breaks 40deg, idle about mid 30's. But I also have a 92mm strapped to it.

Share this post


Link to post
Share on other sites

The thing to do on the install is to use some pliers and gently bend the metal bracket that holds the push pins, once both of the push pins look slightly bent inward towards the center of the cooler.....it will make the install easier. If it want not rubbing with the stock cooler, it should not be rubbing with the EC.

Share this post


Link to post
Share on other sites

hmmm ..its not possible to bend the bracket holes since its all one piece of

solid copper ..what is needed is making the HS stable because it shifts from, side to side

Share this post


Link to post
Share on other sites
hmmm ..its not possible to bend the bracket holes since its all one piece of

solid copper ..what is needed is making the HS stable because it shifts from, side to side

 

Did you get the VC-RF then? They won't fit unless you modify them.

Share this post


Link to post
Share on other sites
yeah i gots it ....i thought its VC-RE the whole time

what kind of mod is needed ?

 

I think it has something to do with elongating one of the holes so it fits right. The VC-RF isn't recommended, but some people have gotten it to work when it's the only version they could find. Also, take the plastic thing off if present and possible, this will reduce the thickness.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...