valenzuela Posted February 9, 2007 Posted February 9, 2007 i just installed Xp media center 2005 and im getting that damn screen any suggestions on how to fix it? Quote Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted February 9, 2007 Posted February 9, 2007 maybe posting in the right section would help... Quote Share this post Link to post Share on other sites More sharing options...
Sharp Posted February 9, 2007 Posted February 9, 2007 Hello, What is the exact memory kit that you have? Have you ever tested this pc with memtest? Quote Share this post Link to post Share on other sites More sharing options...
valenzuela Posted February 10, 2007 Posted February 10, 2007 yea i used mem test built in the bios and it passed sorry i posted in the wrong section didnt know where to post ? Brand OCZ Series Performance Series Model OCZ4001024PFDC-K Type 184-Pin DDR SDRAM Tech Spec Capacity 1GB (2 x 512MB) Speed DDR 400 (PC 3200) Cas Latency 2 Timing 2-3-3-6 Voltage 2.6V Heat Spreader Yes Features Copper Heatspreader http://www.newegg.com/product/product.asp?...N82E16820227031 Quote Share this post Link to post Share on other sites More sharing options...
Sharp Posted February 11, 2007 Posted February 11, 2007 Try these memory timings, GENIE BIOS Setting >DRAM Configuration DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01) Command per clock (CPC)..............Disabled Cas latency (tCL)....................2 RAS to CAS delay (tRCD)..............3 Min RAS active time (tRAS)...........6 Row precharge time (tRP).............3 Row cycle time (tRC).................11 Row refresh cycle time(tRFC).........14 Row to Row delay (tRRD)..............2 Write recovery time (tWR)............AUTO Write to read delay (tWTR)...........AUTO Read to write delay (tRWT)...........AUTO Refresh period (tREF)................AUTO Write CAS latency (tWCL).............1 DRAM Bank Interleave.................Enabled DQS Skew Control.....................AUTO DQS Skew Value.......................0 DRAM Drive Strength..................AUTO DRAM Data Drive Strength.............AUTO Max Async Latency....................6ns Dram Response........................Normal Read Preamble Time...................5ns Idle Cycle Limit.....................AUTO Dynamic Counter......................AUTO R/W Queue Bypass.....................AUTO Bypass Max...........................AUTO 32 Byte Granularity..................AUTO And do you have all 3 power connectors plugged into the board? Quote Share this post Link to post Share on other sites More sharing options...
valenzuela Posted February 12, 2007 Posted February 12, 2007 yea just the 24 pin the 8pin and the pci-e pluged in thank you for the help i'll try your timings and report back Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.