dsaint Posted January 23, 2007 Posted January 23, 2007 Hey peeps Hoping some one can clear up a little confusion for me. My board is a DFI Lanparty UT SLI-DR. Bios 03/29/06 I am trying to get my rig stable. Last night I got 6 hours Orthos stable. Then she stopped. Doh! In PC Health Status there is a shutdown temperature at - I set this to 60 and my rig would shut down. Changed it to 70 and it goes alright now. But what temperature is it monitoring. I hope it's the PWIC or chip-set and not the CPU. And for the CPU temperature adjust - Core Temp always gives me a temperature about 10 degrees higher than Smart Speed Fan or Smart Guardian. So if I set the CPU temp adjust to +10. I should get good readings from speed fan? Well, I can figure out the second question on my own, but would still like a clarification on the first. Cheers *EDIT* Move to whatever DFI section you feel necesarry. dsaint Quote Share this post Link to post Share on other sites More sharing options...
Sharp Posted January 23, 2007 Posted January 23, 2007 Hello, The shutdown temp is for the CPU. Quote Share this post Link to post Share on other sites More sharing options...
dsaint Posted January 23, 2007 Posted January 23, 2007 O.K. Thank you, but that is scary. I'm lowering back down to 60. Think my main problem right now is that I have my own heating duct for a small room. It's hotter in here in the winter then the summer. Thanks again. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.