Jump to content
Sign in to follow this  
bchivers

Can only run on a 150 divider.

Recommended Posts

Don't know what else to do to get to another divider. Here are my current settings.

 

 

Genie BIOS Settings: 2835MHZ.

 

FSB Bus Frequency............................. - 315

LDT/FSB Frequency Ratio....................... - 3x

CPU/FSB Frequency Ratio....................... - 9x

PCI eXpress Frequency......................... - 100Mhz

HT Buss speed ......................... - 945 MHZ

 

CPU VID StartUp Value......................... - 1.35v

 

CPU VID Control............................... - 1.40v

LDT Voltage Control........................... - Stock

Chip Set Voltage Control...................... - Stock

DRAM Voltage Control.......................... - 2.90v

 

DRAM Configuration Settings:

 

DRAM Frequency Set............................ - 150 (DRAM/FSB:3/04)

Command Per Clock (CPC)....................... - Enable

CAS Latency Control (Tcl)..................... - 3

RAS# to CAS# delay (Trcd)..................... - 4

Min RAS# active time (Tras)................... - 7

Row precharge time (Trp)...................... - 4

Row Cycle time (Trc).......................... - 12 Bus Clocks

Row refresh cyc time (Trfc)................... - Auto

Row to Row delay (Trrd)....................... - 02 Bus Clocks

Write recovery time (Twr)..................... - 02 Bus Clocks

Write to Read delay (Twtr).................... - 02 Bus Clocks

Read to Write delay (Trwt).................... - 03 Bus Clocks

Refresh Period (Tref)......................... - 3120 Cycles

DRAM Bank Interleave.......................... - Enabled

 

DQS Skew Control.............................. - Off

DQS Skew Value................................ - 0

DRAM Drive Strength........................... - Normal

DRAM Data Drive Strength...................... - LEVEL 1

Max Async Latency............................. - 10 NS

DRAM Response Time............................ - Normal

Read Preamble Time............................ - 8.5 NS

IdleCycle Limit............................... - 256 Cycles

Dynamic Counter............................... - Disable

R/W Queue Bypass.............................. - 16 x

Bypass Max.................................... - 07 x

32 Byte Granularity........................... - Disable(8 Bursts)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...