bchivers Posted January 22, 2007 Posted January 22, 2007 Don't know what else to do to get to another divider. Here are my current settings. Genie BIOS Settings: 2835MHZ. FSB Bus Frequency............................. - 315 LDT/FSB Frequency Ratio....................... - 3x CPU/FSB Frequency Ratio....................... - 9x PCI eXpress Frequency......................... - 100Mhz HT Buss speed ......................... - 945 MHZ CPU VID StartUp Value......................... - 1.35v CPU VID Control............................... - 1.40v LDT Voltage Control........................... - Stock Chip Set Voltage Control...................... - Stock DRAM Voltage Control.......................... - 2.90v DRAM Configuration Settings: DRAM Frequency Set............................ - 150 (DRAM/FSB:3/04) Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 7 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - Auto Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Off DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Normal DRAM Data Drive Strength...................... - LEVEL 1 Max Async Latency............................. - 10 NS DRAM Response Time............................ - Normal Read Preamble Time............................ - 8.5 NS IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(8 Bursts) Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now