Jump to content

Opteron 146 Maximum 2700Mhz? I think i made mistakes!


m4soN
 Share

Recommended Posts

Hello to all Users in this Forum.

 

It´s my first time that i´m posting in this forum and i hope my english is not too bad for you ;)

 

I got my System since one Year now, but i´m sure that i could get some better Results what i still have.

 

 

At the Moment my System is configured:

 

Opteron 146

DFI Lanparty SLI-DR

Geforce 7800 GTX

OCZ EL GOLD VX PC4000 4x 512MB

 

Genie BIOS Settings:

 

FSB Bus Frequency............................. - 272

LDT/FSB Frequency Ratio....................... - 3x

CPU/FSB Frequency Ratio....................... - 10x

PCI eXpress Frequency......................... - 100Mhz

 

CPU VID StartUp Value......................... - 1.500v

 

CPU VID Control............................... - 1.550v

CPU VID Special Control....................... - 100%

LDT Voltage Control........................... - 1.30v

Chip Set Voltage Control...................... - 1.60v

DRAM Voltage Control.......................... - 3.40v

 

DRAM Configuration Settings:

 

DRAM Frequency Set............................ - 166=RAM/FSB:05/04 ??

Command Per Clock (CPC)....................... - Disable

CAS Latency Control (Tcl)..................... - 2.0

RAS# to CAS# delay (Trcd)..................... - 02 Bus Clocks

Min RAS# active time (Tras)................... - 06 Bus Clocks

Row precharge time (Trp)...................... - 02 Bus Clocks

Row Cycle time (Trc).......................... - 07 Bus Clocks

Row refresh cyc time (Trfc)................... - 16 Bus Clocks

Row to Row delay (Trrd)....................... - 03 Bus Clocks

Write recovery time (Twr)..................... - 03 Bus Clocks

Write to Read delay (Twtr).................... - 02 Bus Clocks

Read to Write delay (Trwt).................... - 03 Bus Clocks

Refresh Period (Tref)......................... - 3120 Cycles

DRAM Bank Interleave.......................... - Enabled

 

DQS Skew Control.............................. - Auto

DQS Skew Value................................ - 0

DRAM Drive Strength........................... - Auto

DRAM Data Drive Strength...................... - Auto

Max Async Latency............................. - Auto

DRAM Response Time............................ - Fast

Read Preamble Time............................ - Auto

IdleCycle Limit............................... - 256 Cycles

Dynamic Counter............................... - Disable

R/W Queue Bypass.............................. - 16 x

Bypass Max.................................... - 07 x

32 Byte Granularity........................... - Disable(4 Bursts)

 

 

 

My Problem is i dont know much things about the configuration of RAM and CPU.

 

I ever thougt better Ram timings are more important than a higher CPU Frequency. Am i right?

 

Or should i change some settings of VCore and Ram Timings to get some higher CPU Settings?

 

I hope you could help me!

 

 

Im cooling my system by air and got Temperatures while im playing newes Games like Gothic 3:

 

CPU: 45° (Celsius)

Ram: 40° (Celsius)

Chipset: 50-55° (Celsius)

 

So its not really hot and i think there must be more possible than now.

 

Hope u could give me some usefull answers and u forgive me my bad english ;)

 

Also i would be thankfull if u have usefull links to actual programs wich i should use to test. Im a noob in this section :(

 

Best greetings from Germany!

m4soN

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...