Jump to content
Sign in to follow this  
awhir

help with setting up raid

Recommended Posts

when i boot the pc when the uli part of bios comes up and says press crtl+s or f4 to open the uli screen i try pressing crlt and s and also tryed f4 but it does not work any ideas on how i can get into this as i want to do a raid 0 on my 2 seagate .

 

hope you can help.

Share this post


Link to post
Share on other sites
Guest Lavell

As soon as the computer starts to boot, try holding down "ctrl" and tapping "s" continuously until the RAID screen shows up.

Share this post


Link to post
Share on other sites

If you are you using a USB keyboard you will need to enable it under integrated periphs in the bios for any controls to work after the POST screen.

Share this post


Link to post
Share on other sites

ya had that allready have done.

 

have tryed it on a ps2 keyboard and a usb and it wont ******* open any ideas.

 

i can get the bios page open.

Share this post


Link to post
Share on other sites

The 7/28 bios has a major bug that won't allow both controllers to have raid enabled that the same time. Disable the SIL controller in the bios and then you should have access to the ULI raid rom for setup.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×