Jaibo Posted December 11, 2006 Posted December 11, 2006 Hi, i recently updated my BIOS, and lost the RAID setup i had. When enabling it again, windows wont detect it as a HD setup. NVraid detects it, its setup in the BIOS by pressing the raid utility F10. The Device Manager detects the array under hard drivers, updated all drivers. But windows, simply wont give me the drive option. Thanks in advance for your help. Quote Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 11, 2006 Posted December 11, 2006 Hello, You managed to follow one rule about stating your location but what about the other rule relating to your hardware/signature? Please create a list of all your hardware and save it to your profile before your next post. http://www.dfi-street.com/forum/profile.php?do=editsignature The RAID array may need formatting again. Right mouse on my computer >Manage Then go to disk management. Do you see the Array there? Quote Share this post Link to post Share on other sites More sharing options...
krazypoloc Posted December 11, 2006 Posted December 11, 2006 Is it in your "Hard drive boot priority" in the BIOS? If so you probably have your BIOS set up correctly, if not then you need to enable SATA/PATA RAID in your main chipset BIOS, not the NVraid BIOS. You shouldn't have to rebuild your array, if you haven't changed any H/W. Quote Share this post Link to post Share on other sites More sharing options...
Jaibo Posted December 11, 2006 Posted December 11, 2006 The sig is updated... srry about this... And the issue is solved i think, i did have to reformat the array, that was it... last time i did this, didnt have to..well, thanks for your help... Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.