Jump to content
Sign in to follow this  
red930

(AM2) Buffalo PC2-6400 / LanParty NF590 SLI-M2R/G / Sempron 3400+

Recommended Posts

DFI LP UT NF590 SLI-M2R/G Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard BIOS 8/29

 

AMD Sempron 3400+ (1800Mhz / 256KB L2 cache)

 

Vigor Monsoon II TEC Cooler

Buffalo Firestix (2 x 1GB) 240-Pin DDR2 800Mhz (PC2-6400)

 

eVGA 8800GTX PCI-E 16x 768MB, NVIDIA 97.02 drivers, (stock)

 

2x Hitachi Deskstar 80GB hard disks, RAID 0

 

Antec True Power Trio TP3-550 550 watt PSU

 

==========

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

CPU Clock Multiplier ............  -  Auto

CPU/C51 HTT Frequency............  -  200MHz

CPU/C51 Multiplier...............  -  Auto

CPU/C51 Width....................  -  Auto

C51/MCP55 HTT Frequency..........  -  Auto

C51/MCP55 HTT Multiplier.........  -  Auto

C51/MCP55 HTT Width..............  -  Auto   

PCIE Slot4 Clock ................  -  Hyperclk

PCIE Slot1 Clock ................  -  Hyperclk



CPU Vid Control..................  -  Auto

CPU vid Special Add..............  -  Auto

C51 NB Core Voltage..............  -  1.2V

MCP55 SB Core Voltage............  -  1.5V

MCT55 Stanby Voltage.............  -  1.5V

CPU/C51 HT Drive Strength........  -  Low, Low

CPU/C51 HT Voltage...............  -  1.3V

C51/MCP55 HT Voltage.............  -  1.3V

DRAM Voltage Control.............  -  1.85V



DRAM Drive Strength..............  -  Level 15

RAM Drive Weak/Normal Mode.......  -  Auto

CLK Enable  Drive Strength.......  -  Auto

Chip Select Drive Strength.......  -  Auto

Mem Address Drive Strength.......  -  Auto

MEM Clock   Drive Strength.......  -  Auto

Memory Data Drive Strength.......  -  Auto

Data Strobe Drive Strength.......  -  Auto

CS/ODT Pin Fine Delay............  -  Enable					  

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

SLI-Ready Memory.................  -  Disable

Timing Mode......................  -  Auto

Memory Clock Value/Limit.........  -  Auto

Command Per Clock (1T/2T)........  -  Auto

CAS# Latency (Tcl) ..............  -  Auto 

Minimum RAS Active (Tras) .......  -  Auto

RAS to CAS R/W Delay(Trcd)  .....  -  Auto

Row Precharge Time (Trtp)........  -  Auto

RAS to RAS Delay (Trrd)..........  -  Auto

Row Cycle Time (Trc) ............  -  Auto

DIMM 1 Row Refresh (Trfc0).......  -  Auto

DIMM 2 Row Refresh (Trfc1).......  -  Auto

DIMM 3 Row Refresh (Trfc2).......  -  Auto

DIMM 4 Row Refresh (Trfc3).......  -  Auto

Read Precharge Time (Trtp).......  -  Auto

Write Recovery Time (Twr)........  -  Auto

Read to Write delay (Trwt).......  -  Auto

Write to Read delay (Twtr).......  -  Auto

Refresh Period Time (Tref).......  -  Auto

Max Async Latency................  -  Auto

Bank Interleave..................  -  Auto

Dram on-die Termination..........  -  Auto

Read Delay From Rx FIFO..........  -  Auto

Read/Write Queue Bypass..........  -  Auto

Bypass Maximum...................  -  Auto

32 Byte Granularity..............  -  Auto

Idle Cycle Limit.................  -  Auto

Dynamic Counter..................  -  Auto

Read DQS Skew....................  -  Auto





[/color]

 

 

==========

 

 

ORTHOS + Everest + 3dMark2001SE + 2x CPU-Z:

 

3dmark01rg0.th.jpg

 

 

3dMark2003:

 

3dmark03jw0.th.jpg

 

3dMark2005:

 

3dmark05wf8.th.jpg

 

3dMark2006:

 

3dmark06ro5.th.jpg

 

 

==========

 

 

short description:

200x9 @ 1800mhz 1.36vcore (auto)/ 1.9vdimm (auto)

DDR2-753 5-5-5-18 2T

Share this post


Link to post
Share on other sites

DFI LP UT NF590 SLI-M2R/G Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard BIOS 8/29

 

AMD Socket AM2 Sempron 3400+ (1800Mhz / 256KB L2 cache)

SDA3400IAA3CN LBBVF 0612TPMW

 

Vigor Gaming “Monsoon II” Heatpipe/TEC Cooler

Buffalo Firestix (2 x 1GB) 240-Pin DDR2 800Mhz (PC2-6400)

 

XFX 6800GS PCI-E 16x 256MB, NVIDIA 93.71 drivers, (stock)

 

Western Digital 740D 74GB “Raptor” Hard Drive

 

Antec True Power Trio TP3-550 550 watt PSU

==========

 

 

[b]Genie BIOS Settings:[/b]
[color=red]
CPU Clock Multiplier ............  -  Auto
CPU/C51 HTT Frequency............  -  200MHz
CPU/C51 Multiplier...............  -  Auto
CPU/C51 Width....................  -  Auto
C51/MCP55 HTT Frequency..........  -  Auto
C51/MCP55 HTT Multiplier.........  -  Auto
C51/MCP55 HTT Width..............  -  Auto   
PCIE Slot4 Clock ................  -  Hyperclk
PCIE Slot1 Clock ................  -  Hyperclk

CPU Vid Control..................  -  Auto
CPU vid Special Add..............  -  Auto
C51 NB Core Voltage..............  -  1.2V
MCP55 SB Core Voltage............  -  1.5V
MCT55 Stanby Voltage.............  -  1.5V
CPU/C51 HT Drive Strength........  -  Low, Low
CPU/C51 HT Voltage...............  -  1.3V
C51/MCP55 HT Voltage.............  -  1.3V
DRAM Voltage Control.............  -  1.85V

DRAM Drive Strength..............  -  Level 15
RAM Drive Weak/Normal Mode.......  -  Auto
CLK Enable  Drive Strength.......  -  Auto
Chip Select Drive Strength.......  -  Auto
Mem Address Drive Strength.......  -  Auto
MEM Clock   Drive Strength.......  -  Auto
Memory Data Drive Strength.......  -  Auto
Data Strobe Drive Strength.......  -  Auto
CS/ODT Pin Fine Delay............  -  Enable					  
[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
SLI-Ready Memory.................  -  Disable
Timing Mode......................  -  Auto
Memory Clock Value/Limit.........  -  Auto
Command Per Clock (1T/2T)........  -  Auto
CAS# Latency (Tcl) ..............  -  Auto 
Minimum RAS Active (Tras) .......  -  Auto
RAS to CAS R/W Delay(Trcd)  .....  -  Auto
Row Precharge Time (Trtp)........  -  Auto
RAS to RAS Delay (Trrd)..........  -  Auto
Row Cycle Time (Trc) ............  -  Auto
DIMM 1 Row Refresh (Trfc0).......  -  Auto
DIMM 2 Row Refresh (Trfc1).......  -  Auto
DIMM 3 Row Refresh (Trfc2).......  -  Auto
DIMM 4 Row Refresh (Trfc3).......  -  Auto
Read Precharge Time (Trtp).......  -  Auto
Write Recovery Time (Twr)........  -  Auto
Read to Write delay (Trwt).......  -  Auto
Write to Read delay (Twtr).......  -  Auto
Refresh Period Time (Tref).......  -  Auto
Max Async Latency................  -  Auto
Bank Interleave..................  -  Auto
Dram on-die Termination..........  -  Auto
Read Delay From Rx FIFO..........  -  Auto
Read/Write Queue Bypass..........  -  Auto
Bypass Maximum...................  -  Auto
32 Byte Granularity..............  -  Auto
Idle Cycle Limit.................  -  Auto
Dynamic Counter..................  -  Auto
Read DQS Skew....................  -  Auto


[/color]

 

 

==========

 

 

ORTHOS + 3dMark2001SE + 2x CPU-Z:

 

ssdbls4.th.jpg

 

3dMark2003:

 

ssdb3dmark03vz4.th.jpg

 

3dMark2005 + Everest:

 

ssdb3dmark05kr9.th.jpg

 

3dMark2006:

 

ssdb3dmark06ej8.th.jpg

 

 

==========

 

 

short description:

200x9 @ 1800mhz 1.36vcore (auto)/ 1.9vdimm (auto)

DDR2-753 5-5-5-18 2T Windows XP Pro SP2 (32-bit)

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×
×
  • Create New...