DuTcH Posted November 14, 2006 Posted November 14, 2006 Ive finished putting my setup together after rma'ing memory and put in 2x120mm evercool fans at the front and two 80's at the back and Ive obviously been interested in my temps, but I dont think it can be right as at full load the cpu isn't touching 25deg, thats cold its never run that cold, whats going on is it a sensor out? Share this post Link to post Share on other sites More sharing options...
integrale Posted November 14, 2006 Posted November 14, 2006 is it overclocked mate ? when my opteron is stock it idles at 20ish and goes to about 30 at load.. i take it its cold in your house though ? its bloody freezing here Share this post Link to post Share on other sites More sharing options...
tasr Posted November 14, 2006 Posted November 14, 2006 Is this the temp reported in the BIOS or some other program? Share this post Link to post Share on other sites More sharing options...
DuTcH Posted November 14, 2006 Posted November 14, 2006 no stock at the mo and yes C! its bloody freezing Share this post Link to post Share on other sites More sharing options...
Guest caffeinejunkie Posted November 14, 2006 Posted November 14, 2006 I have an X2 3800+ @2.65ghz w/1.4v under an si-128 and I get 23c idles w/ 30c loads so those temps are possible with good air and decent ambients. Share this post Link to post Share on other sites More sharing options...
tasr Posted November 14, 2006 Posted November 14, 2006 What temp program are you using? What are the rest of your temps? Share this post Link to post Share on other sites More sharing options...
Guest caffeinejunkie Posted November 14, 2006 Posted November 14, 2006 SmartGuardian Chipset:32c PWMIC:37c That was full load and I even used a temp probe and got close to the same. CPU was a tad off and I would have offset it but no such option because no one really does any work with the rdx200 bios so Im stuck with what Ive got. Share this post Link to post Share on other sites More sharing options...
tasr Posted November 14, 2006 Posted November 14, 2006 CJ those temp looks consistent. That is what I was trying to get from Dutch. Share this post Link to post Share on other sites More sharing options...
MACarter02 Posted November 14, 2006 Posted November 14, 2006 Im sure you've seen the threads about eXpert temp reporting issues? Share this post Link to post Share on other sites More sharing options...
DuTcH Posted November 14, 2006 Posted November 14, 2006 33c pwm 36c chipset at load, MBM and smguardian. My rig has never run this cold before I found it quite strange my cpu fan is automatic so it switches off alot now, scary!! Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now