AceRogers Posted October 20, 2006 hi, i have been having problems with the ram i currently have installed, and i ran memtest and it was ok, but when i run Prime95, it has a fatal error after about 5 mins. This is the text: FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 9 minutes - 1 errors, 0 warnings Execution halted. Can anyone please help me understand this wand what i need to do! Quote Share this post Link to post Share on other sites
tasr Posted October 20, 2006 Did you set up Prime95 the proper way? Check this link; X2 CPU for dual Prime95 stability testing. Also did you install the latest X2 processor driver and Dual Core Optimizer? AMD Dual-Core Optimizer Quote Share this post Link to post Share on other sites
DFIChriZ Posted October 26, 2006 Hello, you overclocked your CPU. Your overclock is unstable. Up the CPU voltage or lower your CPU frequency. Quote Share this post Link to post Share on other sites
ReelFiles Posted October 26, 2006 Did you study and apply the Overclocking guide in tasr's sig? Quote Share this post Link to post Share on other sites
Kingfisher Posted October 26, 2006 It might be your cpu or RAM, Without sitting in front of your PC it's tough to diagnose your issue exactly. If you follow the OC guide it will explain what is needed. Good luck. Quote Share this post Link to post Share on other sites