CharmedLover84 Posted October 11, 2006 Posted October 11, 2006 'ello all, I'm relatively new around here and I've talked to a mod, and they said this is where I should put this. Now you're probably wondering what exactly this is, so I'm going to include a step by step guide, so it'll be idiot proof This thread will be dedicated to the discussion of, and posting of, result screen captures from the Performance Test benchmark built in to the FEAR full version game, as well as the original FEAR Multiplayer Demo (AVAILABLE HERE: http://fear.filefront.com/file/FEAR_Multip...;47969#Download), which is downloadable from their website (NO IT IS NOT AVAILABLE IN FEAR COMBAT). Now, there are rules. But just a few. 1. Your scores must be complete (Minimum, Average and Maximum required) and preferably accompanied by a screenshot (you can do a "Print Screen" on your keyboard when you get to the results of the test and then paste that in MSPaint and convert it using any number of picture editing programs, then post a link to it or post it directly here). 2. You MUST list your system specs, including but not limited to: Your Name - Processor - Processor Speed - RAM & Speed & Timings - Video Card(s) with speeds (Core & RAM) & Driver Version - Motherboard make, model & BIOS - Monitor used for testing, along with the refresh rate (if you want) Also please list whether you have VSync turned on or off, as that drastically effects performance and FPS rates. Now, I'll give you an example of what mine would look like so it's crystal clear: CharmedLover 84 - AMD Athlon FX-60 @ 2.9GHz - OCZ PC4000 @ 500MHz, 3-4-3-8-1T - 2x 7900GTX XXX EDITION @ 710/900, 91.47 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Dell 24" Widescreen Monitor @ 60Hz 3. You MUST use the Maximum Settings for both Computer and Video Card. If you're aiming to get higher scores, go in to the Display settings and turn OFF Vsync, otherwise you'll get capped at your refresh rate, maximum frames per second wise. Note: This should not be run on anything less than a 3.0GHz Pentium or a 2.0GHz AMD processor, and cannot be ran on anything less than 1GB of ram unless your virtual memory paging file is turned on, which will severely degrade your performance. I advise checking the “Recommended Specifications” listed on the F.E.A.R. retail box before trying to test your computer at these settings on the game’s Performance Test. Now that that's out of the way, we have the matter of how the chart will work. Chart positions will be based on the AVERAGE frames per second result. This means that people will be ranked according to the AVERAGE, not the Minimum or Maximum. In the event that there is a tie (on the Average FPS) they will be placed based on their MINIMUM frames per second. If by some miracle two people have the exact same AVERAGE and MINIMUM FPS results, they will be placed based on their MAXIMUM frames per second result. And, last but not least... if by some... strange miracle of chance... two people have the same Min, Avg and Max readouts, they will simply be listed as TIED. Now, there will be TWO different categories for these charts. One will be based off of the results you get with VSync turned ON, the other will be based off of your results with VSync turned OFF. This is because the two results are VERY different in most cases. Also they will also be sectioned off to separate SLI and non-SLI systems. And, last but not least, these tests must be run on the default settings of MAXIMUM on both Computer and Video Card. Again I will provide an idiot-proof guide in this post, if not later on in the post, within the next few days. Also, I'll be postin' my own stuff right after I set this thread up to give you an idea of what is required, hehe. Here's the chart: (Key: In the score (29) 46 (79) 29 is the minimum, 46 the average and 79 the maximum.) VSync On Chart SLI & Crossfire: 1. (44) 71 (85) - CharmedLover84 - AMD Athlon FX-60 @ 2.93GHz - OCZ PC4000 @ 500MHz, 3-4-3-8-1T - 2x 7900GTX XXX @ 710/900, 91.47 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Viewsonic 22" CRT @ 1024x768, 85Hz 2. (49) 58 (61) - Voltes - AMD Opteron 165 @ 2.7GHz - 2x 1gb Ballistix Z503 @ ???MHz, ?-?-?-?-?T - 2x XFX 7900GT @ 700/900, ??.?? drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - ??? SyncMaster 204B 3. (45) 57 (60) - OldGuy - Intel Conroe E6600 @ 3.807ghz - Geil Ultra DDR2 1000 @ 846mhz 4-4-3-12 - (2) XFX 7900GTX in SLI 665/815 (stock) 85.96 hacked SLI drivers - DFI Infinity 975X/G bios 9/13 - Dell 24" Widescreen LCD - 1024 X 768 4. (35) 56 (65) - Taowulf - AMD 64 X2 @ 2.2Ghz - Corsair XMS2 PC6400 @ 400Mhz 2GB 5-5-5-18 2T - 2x 7900GS KO @ 525/700 91.47 drivers DFI Lanparty UT NF590 SLI-M2R/G Dell 20.1" Widescreen @60Hz Singles: 1. (46) 76 (86) - CharmedLover84 - AMD FX-60 @ 2.95GHz - OCZ PC4000 @ 493MHz, 3-4-3-8-1T - EVGA 8800GTX @ 620/1940, 97.02 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Viewsonic E220 22" CRT @ 1024x768 @ 85Hz 2. (43) 66 (101) - MadDias - AMD Opteron 165 @ 2.8GHz - 2GB G.SKILL HV @ 511MHz, 3-3-2-8-1T - ATI X1800XT 256mb @ 735.75/1692 - DFI Lanparty RDX200 CF-DR - SAMTRON98PDF 19" CRT 3. (58) 59 (74) - Praz - AMD Opteron 165 @ 3.024GHz - 2GB Mushkin Xtreme Perf. Redline @ 550MHz, 3-3-2-0-1T - NVidia 8800GTX @ 575/1800 - DFI Lanparty SLI-DR Venus - Viewsonic VX2025x2 4. (40) 58 (67) - Voltes - AMD Opteron 165 @ 2.7GHz - 2x 1gb Ballistix Z503 @ ???MHz, ?-?-?-?-?T - XFX 8800GTS @ STOCK, 97.02 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - ??? SyncMaster 204B 5. (38) 57 (87) - Slagathor - AMD Opteron [email protected] - Mushkin XP3200 L2V2 2-2-2-5-1t@200mhz - 1 7900GT CO SC-91.31 drivers - DFI Ultra D - Oskar Wu N4D623-2 - 19" Samsung 900SL 6. (30) 56 (60) - OldGuy - Intel Conroe E6600 @ 3.807ghz - Geil Ultra DDR2 1000 @ 846mhz 4-4-3-12 - (1) XFX 7900GTX 665/815 (stock) 91.47 WHQL - DFI Infinity 975X/G bios 9/13 - Dell 24" Widescreen LCD - 1024 X 768 7. (36) 53 (62) - Nightshadow - AMD 4800+ @ 2.4GHz ~ PC X1900XT @ Stock 625/750 Driver Ver.8.301 ~ 2x1GB G.Skill F1-4000USU2-2GBHZ PC4000 ~ 17" NEC CRT 8. (29) 51 (61) - Splave - Intel Conroe E6600 @ 2.4ghz - OCZ Plat Rev.b DDR2 800 @ 800mhz ?-?-?-?-?T - EVGA 7950GT @ 560/1450(stock) ??.?? drivers - DFI Infinity 975X/G bios ?/?? - Samsung 19" 941BW Widescreen LCD - 1024 X 768 9. (18) 32 (71) - TheSpin - AMD Opteron X2 4600+ @ ?.??GHz - OCZ PC3500 @ ???MHz, ?-?-?-?-?T - ATI X700 @ ???/???, ???? drivers - DFI Lanparty UT SLI-DR Expert (04-06-06 BIOS) - 1024x768 on ??? monitor @ ??Hz 10. (17) 32 (59) - oc newbie - AMD Opteron 146 @ 3.050GHz - OCZ PC4000 @ 500MHz, 3-4-3-8-1T - 6800GS @ 510/1200, 84.25 64bit drivers - DFI Lanparty UT SLI-DR Expert (E704-2BT) - 1024x768 ancient crt monitor @ 60Hz 11. 12. 13. VSync Off Chart SLI & Crossfire: 1. (85) 175 (499) - OldGuy - Intel Conroe E6600 @ 3.807ghz - Geil Ultra DDR2 1000 @ 846mhz 4-4-3-12 - (2) XFX 7900GTX in SLI 665/815 (stock) 85.96 hacked SLI drivers - DFI Infinity 975X/G bios 9/13 - Dell 24" Widescreen LCD - 1024 X 768 2. (66) 144 (351) - CharmedLover84 - AMD Athlon FX-60 @ 2.94GHz - OCZ PC4800 @ 588MHz, 2.5-4-4-10-1T - 2x 7900GTX XXX @ 715/900, 93.71 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Dell 24" Widescreen Monitor @ 60Hz 3. (55) 120 (377) MadDias - AMD Opteron 165 @ 2.8GHz - 2GB G.SKILL HV @ 511MHz, 3-3-2-8-1T - ATI X1800CrossfireEdition + X1800XT 512mb @ 705/819 - DFI Lanparty RDX200 CF-DR - SAMTRON98PDF 19" CRT 4. (55) 119 (264) - Voltes - AMD Opteron 165 @ 2.7GHz - 2x 1gb Ballistix Z503 @ ???MHz, ?-?-?-?-?T - 2x XFX 7900GT @ 700/900, ??.?? drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - ??? SyncMaster 204B 5. (42) 98 (253) - Taowulf - AMD 64 X2 @ 2.2Ghz - Corsair XMS2 PC6400 @ 400Mhz 2GB 5-5-5-18 2T 7900GS KO @ 525/700 91.47 drivers DFI Lanparty UT NF590 SLI-M2R/G Dell 20.1" Widescreen @60Hz 6. (39) 82 (148) - DaddyD302 - AMD 64 X2 (AM2) @ 3Ghz - 2GB OCZ Platinum PC2 6400 @ ???Mhz ?-?-?-?? ?T 2x EVGA 8800GTX in SLI @ STOCK 97.02 drivers - DFI Lanparty UT NF590 SLI-M2R/G - Gateway FPD2185W Singles: 1. (60) 127 (343) - Praz - AMD Opteron 165 @ 3.024GHz - 2GB Mushkin Xtreme Perf. Redline @ 550MHz, 3-3-2-0-1T - NVidia 8800GTX @ 575/900 - DFI Lanparty SLI-DR Venus - Viewsonic VX2025x2 2. (52) 127 (301) - CharmedLover84 - AMD Athlon FX-60 @ 2.94GHz - OCZ PC4800 @ 588MHz, 2.5-4-4-10-1T - 8800GTX XXX @ 610/960, 97.02 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Dell 24" Widescreen Monitor @ 60Hz 3. (57) 124 (317) - Thraxz - Intel Conroe E6600 @ 3.195GHz - OCZ DDR2-1000 @ 812MHz, 4-4-4-14-?T - ATI X1900XTX @ 766/855 Warcat 6.11 Drivers - DFI Infinity 975X/G - Samsung 204B monitor 4. (55) 117 (309) - Thraxz - AMD Opteron 165 @ 2.95GHz - Centon Advanced BH-5 @ 492MHz, 1.5-2-2-0-1T - ATI X1900XTX @ 760/1710 Omega 6.5 Drivers - DFI Lanparty UT SLI-DR - Samsung 204B monitor 5. (47) 108 (249) - Sorrento - AMD Opteron 175 @ 2.7GHz - OCZ PC3200, 2-3-2-5-1T - 7950GX2 @ 500/1200, 92.91 beta drivers - DFI Lanparty UT SLI-DR - Dell 24" 2407WFP @ 1024 x 768 6. (50) 107 (252) - Voltes - AMD Opteron 165 @ 2.7GHz - 2x 1gb Ballistix Z503 @ ???MHz, ?-?-?-?-?T - XFX 8800GTS @ STOCK, 97.02 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - ??? SyncMaster 204B 7. (53) 106 (262) - OldGuy - Intel Conroe E6600 @ 3.807ghz - Geil Ultra DDR2 1000 @ 846mhz 4-4-3-12 - (1) XFX 7900GTX 665/815 (stock) 91.47 WHQL - DFI Infinity 975X/G bios 9/13 - Dell 24" Widescreen LCD - 1024 X 768 8. (50) 102 (250) - CharmedLover84 - AMD Athlon FX-60 @ 2.94GHz - OCZ PC4800 @ 588MHz, 2.5-4-4-10-1T - 7900GTX XXX @ 710/900, 93.71 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Dell 24" Widescreen Monitor @ 60Hz 9. (51) 99 (248) - Nightshadow - AMD 4800+ @ 2.6GHz ~ PC X1900XT @ Stock 645/785 Driver Ver.8.301 ~ 2x1GB G.Skill F1-4000USU2-2GBHZ PC4000 ~ 17" NEC CRT 10. (52) 97 (246) - Slagathor - AMD Opteron [email protected] - 2gb Mushkin Redline 3-3-3-8-1t@243mhz-1 7900GT CO SC(600/825)-91.31 drivers-DFI Ultra D-Oskar Wu N4D623-2-19" Samsung 900SL 11. (49) 93 (232) - MadDias - AMD Opteron 165 @ 2.8GHz - 2GB G.SKILL HV @ 511MHz, 3-3-2-8-1T - ATI X1800XT 256mb @ 735.75/1692 - DFI Lanparty RDX200 CF-DR - SAMTRON98PDF 19" CRT 12. (43) 90 (226) - Dynamite - AMD Athlon 64 3700+ @ 2.5GHz - Teamgroup Xtreem Chronus DDR500 2GB @ 3-4-4-8-?T - 7900GTO @ 680/800, ??.?? drivers - DFI Lanparty UT SLI-DR Expert Rev 3 (11/2/2005) - ??? Monitor 13. (45) 89 (218) - Splave - Intel Conroe E6600 @ 2.4ghz - OCZ Plat Rev.b DDR2 800 @ 800mhz ?-?-?-?-?T - EVGA 7950GT @ 560/1450(stock) ??.?? drivers - DFI Infinity 975X/G bios ?/?? - Samsung 19" 941BW Widescreen LCD - 1024 X 768 14. (44) 89 (222) - Redbeaver - AMD X2 3800+ @ 2.9GHz - OCZ PC4000 @ DDR477 3-4-3-8-1T 2.75Vs - EVGA 7900GT KO @ 710/765, ??.?? drivers - DFI Infinity NF4 SLI (04/20/06) - Unknown Monitor 15. (42) 89 (189) - Playah - AMD Opteron 148 @ ?.??? - Patriot PC4000 - 7900GTO @ 710/765, 84.21 drivers - DFI Lanparty Ultra-D (11/14/2005) - 20.1" LCD 16. (43) 82 (185) - pikachinks - AMD Opty 165 @ 2.8Ghz ~ OCZ Platinum 2GB PC3200 2-3-2-7 ~ EVGA 7900 GT KO SUPERCLOCK 580/1580 (Stock) ~ DFI LanPaRTY nf4 SLI-DR Expert ~ Dual Sony Trinitron 21" Monitors 17. (37) 75 (172) Charmedlover84's Sister - AMD Opty 165 @ 2.4GHz - Patriot PC3200 @ DDR444 2.5-3-3-8 - 7800GTX 256MB @ 490/1300, 91.47 drivers - Asus A8N-SLI Deluxe - Viewsonic 17" LCD (VX715 I think) 18. (20) 45 (107) - oc newbie - AMD Opteron 146 @ 3.050GHz - OCZ PC4000 @ 500MHz, 3-4-3-8-1T - 6800GS @ 510/1200, 84.25 64bit drivers - DFI Lanparty UT SLI-DR Expert (E704-2BT) - 1024x768 ancient crt monitor @ 60Hz 19. (18) 39 (84) - Thespin - AMD X2 4600+ @ 2.8GHz - OCZ PC3500 @ 200MHz, 2-2-3-6-1T - ATI X700 Pro @ 529/533, 8.282.0.0 drivers - DFI Lanparty UT SLI-DR Expert (04-06-06 BIOS) - 1024x768 on ViewSonic G90f monitor @ 90Hz 20. 21. 22. THE BIG LEAGUES 1600x1200/Max/Max/VSync Off 1. (43) 82 (186) - CharmedLover84 - AMD Opteron 165 @ 2.9GHz - OCZ PC4800 @ 581MHz, 2.5-4-4-10-2T - 8800GTX @ 620/970, 97.44 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Dell 24" Widescreen Monitor @ 60Hz 2. (30) 63 (145) - Thraxz - Intel Conroe E6600 @ 3.14ghz - 1x 1GB 1x1gig OCZ Gold DDR800 @ 862MHz, 4-4-4-14-?T - ATI X1900XTX @ 740/1700 Warcat 6.11 Drivers - DFI Infinity 975X/G - Samsung 204B monitor 3. 4. 5. 6. Note: IN ORDER FOR YOUR ENTRY TO BE POSTED TO THE CHART YOU NEED TO PROVIDE A SCREEN CAPTURE OF YOUR RESULTS RAN AT MAXIMUM/MAXIMUM SETTINGS! Also Note: THE SETTINGS YOU USE TO DO THIS TEST DO NOT HAVE TO BE OCDB STABLE! Also, to ensure that it runs well for you I do recommend downloading all the FEAR updates and running this test on the 1.08 version of the game. Idiot-Proof Guide Step 1: Open the Game- Step 2: Go to Options > Performance > : Step 3: Set both Computer and Video Card to MAXIMUM: Step 4: Hit "Test Settings": Step 5: Once the Results pop up, hit "Print Screen" and paste it in to MSPaint: Step 6: Post the screenie here with your specs. If you don't know how to do this part... well, I'll post screenies on how to do it too LOL And PLEASE post it in thumbnail format after uploading to Imageshack or another image hoster, I don't want people complaining because this thread takes forever to load! If you have any questions or comments, please email me @ [email protected] at any time. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted October 11, 2006 Posted October 11, 2006 And here's my example/official SLI post: VSYNC OFF Minimum: 46 Average: 114 Maximum: 279 Screenie: CharmedLover84 - AMD Athlon FX-60 @ 2.9GHz - OCZ PC4000 @ 500MHz, 3-4-3-8-1T - 2x 7900GTX XXX @ 710/900, 91.47 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Dell 24" Widescreen Monitor @ 60Hz VSYNC ON Minimum: 45 Average: 67 Maximum: 76 Screenie: Same settings as above but with the Dell 24" widescreen @ 1024x768 @ 75Hz Share this post Link to post Share on other sites More sharing options...
oc newbie Posted October 11, 2006 Posted October 11, 2006 VSYNC OFF Minimum: 20 Average: 45 Maximum: 107 LOL I really need a new card or two. Screenie: oc newbie - AMD Opteron 146 @ 3050 - OCZ PC4000 @ 500MHz, 3-4-3-8-1T - 6800GS @ 510/1200, 84.25 64bit drivers - DFI Lanparty UT SLI-DR Expert (E704-2BT) - 1024x768 ancient crt monitor @ 60Hz VSYNC ON Minimum: 17 Average: 32 Maximum: 59 All I can say is ouch that hurts. Screenie: Same settings as above __________________ Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted October 11, 2006 Posted October 11, 2006 Eh, that ain't bad, 'specially considering that monitor is crippling you when it comes to VSync on, I'm gonna hook up my monsterous CRT that can do 100Hz @ 1024x768 and retest on VSync On LMAO See how she does then. May not raise the min and avg much but I'm sure it'll boost my maximum. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted October 12, 2006 Posted October 12, 2006 My new VSync test, screen wouldn't do 100Hz for some reason so I backed it off to 85Hz, here tis: VSYNC ON: Min: 44 Avg: 71 Max: 85 Screenie: CharmedLover84 - AMD Athlon FX-60 @ 2.93GHz - OCZ PC4000 @ 500MHz, 3-4-3-8-1T - 2x 7900GTX XXX @ 710/900, 91.47 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Viewsonic 22" CRT @ 1024x768, 85Hz Normally I wouldn't double post... but this deserves it's own post. VSYNC OFF Min: 51 Avg: 123 Max: 299 Don't believe it? Feast your eyes boys: I saw that minimum and I was like =-O that's one thing I never expected to see from this... but, I had to modify my specs a bit :-D CharmedLover84 - AMD Athlon FX-60 @ 2.93GHz - OCZ PC4000 @ 500MHz, 3-3-3-8-1T - 2x 7900GTX XXX @ 715/900, 91.47 drivers - DFI Lanparty UT SLI-DR Expert (04/06/06 BIOS) - Dell 24" WS LCD Share this post Link to post Share on other sites More sharing options...
Thraxz Posted October 12, 2006 Posted October 12, 2006 I really think you should LINK a demo for us non FEAR players. We're lazy. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted October 12, 2006 Posted October 12, 2006 LOL I'd be happy to, one moment and I'll add it to this post. http://fear.filefront.com/file/FEAR_Multip...;47969#Download Lemme know if that doesn't work for ya. Share this post Link to post Share on other sites More sharing options...
Sorrento Posted October 12, 2006 Posted October 12, 2006 Running on LCD, so no Vsynch for me... 47 / 108 / 249 fps (min / average / max) CPU: Opteron 175 @ 2.7 ghz (signature) Mobo: DFI LP SLI-DR (signature) RAM: OCZ Platinum EL PC3200 CL2 3 2 5 1T Vid: 7950GX2 @ stock 500/1200 mhz 92.91 beta drivers Monitor: Dell 24" 2407WFP @ 1024 x 768 And at native 1920 x 1200: Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted October 12, 2006 Posted October 12, 2006 Sorrento, how in the heck are you getting it to run 1920x1200? I wanna be able to do that I'll add you to the chart shortly. Share this post Link to post Share on other sites More sharing options...
Sorrento Posted October 12, 2006 Posted October 12, 2006 you rig is capable of... all you need to do is go to your Shared Documents folder then Monolith Productions folder and inside go into FEAR... then edit the settings.cfg file at the "ScreenWidth" and "ScreenHeight" lines... and you can run at any real resolution your monitor is capable of. Just don't go into Display settings because it will revert everything back to normal 4:3 resolutions. Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted October 12, 2006 Posted October 12, 2006 Cool. Thanks, I'm gonna try that right now LOL Share this post Link to post Share on other sites More sharing options...
CharmedLover84 Posted October 12, 2006 Posted October 12, 2006 Not bad considering my processor is a bottleneck as far as two 7900GTXs are concerned LOL Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now