Jump to content

Apacer Infinion voltage


JasonX
 Share

Recommended Posts

Hi guys

 

 

Im stuck with four sticks of this http://img92.imageshack.us/img92/807/middle1127727666yx8.jpg(I got the 512 sticks)

till i get my 2gb kit next month.

These are the results i got with four of these sticks 250x hammer fid 11 2770ghz memtest and prime stable the ram is running at 197mhz ram voltage is 2.7 and ram timing is 3448 2t.Now heres my question whats the max voltage i can run through these ram im asking cause if i go to 254 i get 4000 errors in memtest 5 running at 2.7volts if i go to 2.8volts i get a little less errors but still alot i dont want to frie these ram so whats the max i should put through them.

Heres a a64tweaker pic maybe something i should change

http://img150.imageshack.us/img150/1303/untitledsz3.jpg

Share this post


Link to post
Share on other sites

You should see if you can find out the specs from the manufacturer on how much juice they can take, and definatly put a fan on them. And just to play it safe, I would use the bios to make any changes also, not any third party software.

 

These nf3 boards are very finicky, like a high maintainance girlfriend, and don't like low quality or third party 'oc programs.

Share this post


Link to post
Share on other sites

you could use 2.9v.Put a fan on it.Infineon usually from what I had did almost ddr500.with 2.5-4-4-8.Try some diffrent settings.

 

Thx AsAsIn8eR so 2.9 is the max i should pump threw this ram?

 

 

Thx in Advance

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...