alajarvi84 Posted July 30, 2006 Posted July 30, 2006 Hi, got my 3700+ squeezed to 2.81ghz at 255*3*11*1.325+121%"1.57v" !!? Cant go any higher , because the vcore goes too high for me Now the temps are ok Tried to prime at 1.55v but at test 2 "blend" rounding error... Rised vcore to 1.57v , test4 rounding error.... i think that the cpu vcore is ok , but my memory timings are too tight Running mushkins at 1T.3.3.8.2.7.14.2.2.1.2.4672.8/3..7ns.5,5ns.0clks "255mhz" ddr510 System was stable at 2.75ghz 250*4*11*1.300+116%"1.51v" with these timings !!!!!! i mean PRIME95 stable... should i loosen up some timings to get stability ?? Because im pretty sure its mem problem :mad: 10mhz increasement should not be too much because these sticks has been runned at 285mhz 1/1... of curse with loosen up timings but still... :confused: Could it be the trwt "2" , the cpu:s memcontroller is squeezed quite tight with trwt"2" Share this post Link to post Share on other sites More sharing options...
alajarvi84 Posted July 30, 2006 Posted July 30, 2006 Heres a a64 info pic Share this post Link to post Share on other sites More sharing options...
alajarvi84 Posted July 30, 2006 Posted July 30, 2006 HCi memtest is STABLE , SuperPi almost stable... tight results tough But the superpi used to be stable too at 2.75ghz !!?? Share this post Link to post Share on other sites More sharing options...
Guest GripS Posted July 30, 2006 Posted July 30, 2006 I think your expecting too much from a 3700+. But that's just me. If it ain't prime95 stable it isn't stable period. Share this post Link to post Share on other sites More sharing options...
alajarvi84 Posted July 30, 2006 Posted July 30, 2006 I could bump the voltage to 1.6v and i think it could be stable then... it is so close... The mhz increasement is just 60mhz ive examined others 3700+ oc:s , and it usually goes up to 2.9ghz - 3.0ghz but theres a magic border at 2.8ghz where the vcore starts to reguire heavenly voltages :D As on my case (2.75ghz stable at 1.51v) oc 60mhz and vcore needs allready 1.57-1.6v My expectations on my 3700+ are so quite realistic !!! If it blows up , i dont give a S**T Soon i get vapochill , so the temps are not the problem anymore. When the cpu core temps decrease to near 0*C , then i can lower the voltage... But some help could be needed tough :confused: Share this post Link to post Share on other sites More sharing options...
Praz Posted July 30, 2006 Posted July 30, 2006 Those timings shouldn't be too tight for Redlines. The processor probably needs more VCORE. Drop the divider to 180 and run Prime. Share this post Link to post Share on other sites More sharing options...
alajarvi84 Posted July 30, 2006 Posted July 30, 2006 Ok i try with the divider Share this post Link to post Share on other sites More sharing options...
Voltes-5 Posted July 30, 2006 Posted July 30, 2006 I suspect its not the Redline giving out. Those are pretty good sticks, and at just ddr510 is should be able to run 1:1 with the cpu. I think it more of a cpu issue. Take the ram out of the equation and test the cpu @ 255X11. Share this post Link to post Share on other sites More sharing options...
alajarvi84 Posted July 30, 2006 Posted July 30, 2006 The problem was simply that the cpu didnt go any higher... Tried at 255 =nope , 254=nope , 253=almost , 252=success 2.77ghz Damn this is a budget piece of S**T 3700+ Oh well... What tests should i try first at prime95 to make sure i should even start running 24h ??? Simply meaning the toughest tests ! Runned allready some "max heat" ?? test Temps stayed below 47*C cpu & 40*C mobo See pic ! Share this post Link to post Share on other sites More sharing options...
alajarvi84 Posted July 30, 2006 Posted July 30, 2006 BTW with 1.6v vcore system recraped to boot at all at 255fsb :D So this is it for my cpu.... Share this post Link to post Share on other sites More sharing options...
alajarvi84 Posted July 30, 2006 Posted July 30, 2006 Oh , btw.. should i rise the HT to 4x ?? it would be like 1008mhz ??? If ive understanded correctle , the dfi boards can handle a little oc on the HT ??? Share this post Link to post Share on other sites More sharing options...
Voltes-5 Posted July 30, 2006 Posted July 30, 2006 Above 250 ldt multi to x3 in most cases, some people have done great living it at x4. fsb 250 X ldt x4 = 1000/ x2 ddr = 2000. My system, fsb 300 X ldt x3 = 900/ x2 ddr = 1800. Within range. But I think you're right, you may have found the max of your cpu. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now