Azn Tr14dz Posted July 27, 2006 Posted July 27, 2006 I recently got a DFI LanParty UT nF4 Ultra-D, and for some reason, my GeIL Ultra Platinum on goes up to 208Mhz @ 2-3-3-6 1T...and I've tried other timings such as 2.5-3-3-6 1T, and also 3-4-4-9 1T, and for all none can get past a 10Mhz overclock. On my previous board(Jetway 939Gt4-SLI) I got it to around 250Mhz Memtest86 stable. I know the board has lots of options for memory, and I read the huge overclocking section and set it all to the appropriate values, and still nothing...what should I do? Recommended BIOS? Thanks, Azn Quote Share this post Link to post Share on other sites More sharing options...
Voltes-5 Posted July 27, 2006 Posted July 27, 2006 It is frustrating when ram sticks that work on other board and will not on another, especially when you have already known that it works. Take my OCZ plats, works great on my SLI-DR, ddr630, my Expert, cant get it to ddr500. Here is what I would do. Set bios settings to default, everything at stock. Take the cpu out of the equation by lowering the multiplier. Now test the rams together with memtest for at least 4hrs. If no error leave it at stock then increase the speed by 5 increments and test with memtest everytime of increase. Testing ram and getting its best potential is a lot of work. Good luck. Oh, where are my manners. Welcome to the Streets!!!!!!!! Quote Share this post Link to post Share on other sites More sharing options...
Azn Tr14dz Posted July 27, 2006 Posted July 27, 2006 I think I'm doing something wrong with the other settings...but I'll try memtest86 again at stock, then increase by a little bit at a time... Thanks, hope I can get something out of it again... -Azn Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.