Jump to content
Sign in to follow this  
Who

DFI Expert, Dual Core and Dual Channel = 3DoD

Recommended Posts

Expert/ 406 bios

3800 X2 (stepping coming) 0608 UPMW

2 X 1024 G.Skill HZ

 

CPU Multiplier = X10

CPU VID Startup Value = Startup

CPU VID Control = 1.35

CPU VID Special Control = 109.6%

Actual Voltage = 1.47

Chipset Voltage Control = 1.52

LDT Voltage = 1.2

HTT (LDT/FSB) = X3

CPU Mhz = 2680

FSB = 268

Memory FSB = 268

Memory Voltage = 2.6

Mem Percentage

Mem and Ratio = 200 1:1

CPC = Enabled

Tcl = 3.0

Trcd = 4

Tras = 8

Trp = 4

Trc = 8

Trfc = 16

Trrd = 2

Twr = 2

Twtr = 2

Trwt = 3

Tref = 3120

Odd Div or Twcl = Disabled

Dram B Interleave = Enabled

DQS Skew = Auto

DQS Skew Val = 0

DRAM Dr Str = Level 5

DRAM Data Dr Str = Level 2

Max Async Lat = 8ns

Dram Response Time = Normal

Read Premable Time = 5.5

idlecycle limit = 256

dynamic counter = Disabled

r/w queue bypass = 16X

bypass max = 7x

32 byte granularity = 4 bursts

_________________

Share this post


Link to post
Share on other sites

Ahh some more settings, thx you sir. =)

 

Dr str 5 and dt str 2? do you run it there all the way down to 200?

 

Max async 8 (is this 7 till around 240?)

read preamble 5.5

32byte 4 bursts

 

Trwt 3

 

 

I'm not nit picking i swear...=)

 

I just have nothing to do here at work. =/

 

I brought my machine in but... left my ram at home on my desk. I've got the 1 stick of 1024 in... I'm going to throw in some stuff from a dell machine i have here...but i'd doubt that it is even 400 stuff, those cheap bastards will throw any ram that will work in their machines. =(

 

Edit:

2x256 Elpida ram...

333

2.5

3

3

7

12

256

1T

 

It's up and running...prime running now. 333 with those 2gb sticks wouldn't even boot.

(tweaker isn't showing up right...timings in there are showing as: 4.5 22 24 7 7 15 7 3 2 8 200-1.95 8 16x 128 en en 7x 15ns 9.5ns 256 en 200 dis weak en)

Share this post


Link to post
Share on other sites

Nitpick all you want. lol. I went back and double checked my settings and they are correct. I'll post up both a stock speed and OC'd database entry in the next couple of days with finalized settings.

 

At stock speeds I can run pretty much run optimised defaults except for Trc has to be raised to 8

 

DDS of 5 and DDS of 2 hold just fine at 200. I have a set of Corsair VS that needs DS 8 DDS 3 to get running smooth at 200.

Max Async of 7 holds till right around 245.

 

I haven't had any memory problems with my board. It will run 2 X 256 PC2700 infineon just as well as 2 X 1024 G.Skill.

Share this post


Link to post
Share on other sites

Cool thx u sir!

 

Really odd ram here...I've double checked the settings for this "Elpida" ram.

 

It's supposed max is 166 2.5 3 3 2.5v... I'm running 200 2 3 3 2.8v at the moment. The chips have been remarked grr. I'm working on seeing how low it'll go at stock at the moment. (no possible way i found some old bh-5 or tccd stuff i suppose...) Quick testing with one run of 32m SPi at each timing change.

 

;)

 

Atm i'm just happy to be booting with two sticks. I can't believe i left all my ram at home. Grr!

 

Edit:

Running

200 en 2 3 7 2 12 16 2(1) 2 2(1) 2 3120 dis en auto 0 7 2 7 Fast 5 256 dis 16x 7x dis

210 en 2.5 4 8 4 12 16 2 2 2 2 3120 dis en auto 0 Auto Auto 7 Fast 5 256 dis 16x 7x (early testing...so high latency stuff...)

220 en 2.5 3 7 3 12 16 3 3 2 3 3120 dis en auto 0 7 2 7 Fast 5 256 dis 16x 7x dis

 

Pretty good for stuff i thought really sucked...heh. Rated at 333...running 440 right now.

Share this post


Link to post
Share on other sites

Holy crap...I think i may have found my issue with the ocz 2gb kits, that i didn't bring in today ( >< )... Hopefully when i get home i'll be able to get this issue figured out.

 

A link provided by the ocz guy here Andy, specific issues encountered by both of my 2gb kits and the expert mobo.

http://www.bleedinedge.com/forum/showthread.php?t=18106

 

Basically they both need a fairly high dram drv str. My gold sticks need 10 and the plats can work with 8-10 depending i guess. My settings for Max async and read preamble were tight compared to his settings as well, despite working fine paired with the 3500+.

Share this post


Link to post
Share on other sites

i cant play a game more than 15min with my X2 3800+ with everything stock...but my mobo says 1.3V is stock for the cpu..but i bumped it up but still nothin....

Share this post


Link to post
Share on other sites
i cant play a game more than 15min with my X2 3800+ with everything stock...but my mobo says 1.3V is stock for the cpu..but i bumped it up but still nothin....
What's your video card doing? What you described is running a video intensive app on an OC'd card with a GPU with known problems when OC'd (and even when not OC'd).

Share this post


Link to post
Share on other sites
I have problems, memtest wont pass and I get random restarts, tried different voltages and timings but still no go
Check out the OC database and see if you can find a similar setup as a starting point for memory timings. Better yet, I just found this thread looking for something else: http://www.dfi-street.com/forum/showthread.php?t=25447. And, the orange slots are usually better when you only have 2 sticks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...