Jump to content
Angry_Games

Socket LGA775 Overclocking Database

Recommended Posts

DFI LP UT P35-T2R (LP 35DB07 BIOS)

 

Intel E6600 (L714A245)

 

2x1024 Crucial Ballistix 8500

 

X1900 [email protected]/797, CAT 6.6 DRIVERS

 

2X36GB Western Digital Raptor 10,000RPM SATA hdd RAID 0

 

LITEON 832S DVD R/W

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
Genie BIOS Setting:

Exit Setup shutdown....................... - Mode 2
CLOCK VCO divider......................... - Auto
CPU Clock Ratio........................... - 8 X
- Target CPU Clock........................ - 4240 MHz
CPU Clock................................. - 530 MHz
Boot Up Clock............................. - Auto
DRAM Speed................................ - 333/667
- Target DRAM Speed....................... - DDR2 1061
PCIE Clock................................ - 105 MHz
PCIE Slot Config.......................... - 1X 1X

CPU Spread Spectrum....................... - Disabled
PCIE Spread Spectrum...................... - Disabled
SATA Spread Spectrum...................... - Disabled


CPU Feature:

Thermal Management Control................ - Disabled
PPM(EIST) Mode............................ - Disabled
Limit CPUID MaxVal........................ - Disabled
C1E Function.............................. - Disabled
Execute Disable Bit....................... - Disabled
Virtualization Technology................. - Disabled
Core Multi-Processing..................... - Enabled


Voltage Setting:

CPU VID Control........................... - 1.6V
CPU VID Special Add....................... - 101.65%
DRAM Voltage Control...................... - 2.23V
SB 1.05V Voltage.......................... - 1.15V
SB Core/CPU PLL Voltage................... - 1.55V
NB Core Voltage........................... - 1.61V
CPU VTT Voltage........................... - 1.58V
Vcore Droop Control....................... - Disabled
Clockgen Voltage Control.................. - 3.45V
GTL+ Buffers Strenght..................... - Strong
Host Slew Rate............................ - Weak
GTL REF Voltage Control................... - Enabled
CPU GTL 1/3  REF Volt..................... - 110
CPU GTL 0/2  REF Volt..................... - 110
North Bridge GTL REF Volt................. - 110


DRAM Timing:

Enhance Data transmitting................. - Fast
Enhance Addressing........................ - Fast
T2 Dispatch............................... - Auto

CAS Latency Time (tCL).................... - 4
RAS# to CAS# Delay (tRCD)................. - 4
RAS# Precharge (tRP)...................... - 4
Precharge delay (tRAS).................... - 12
All Precharge to ACT...................... - AUTO
REF to ACT Delay (tRFC)................... - 24
Preformance LVL (Read delay).............. - AUTO

MCH ODT Latencey.......................... - AUTO
Write to PRE Delay (tWR).................. - AUTO
Rank Write to Read (tWTR)................. - AUTO
ACT to ACT Delay (tRRD)................... - AUTO
Read to Write Delay (tRDWR)............... - AUTO
Ranks Write to Write (tWRWR).............. - AUTO
Ranks Read to Read (tRDRD)................ - AUTO
Ranks Write to Read (tWRRD)............... - AUTO
Read CAS# Precharge (tRTP)................ - AUTO
All PRE to Refresh........................ - AUTO


Clock Setting Fine Delay:

Ch1 Clock Crossing Setting................ - More Aggressive
DIMM 1 Clock fine delay................... - Current[14]
DIMM 2 Clock fine delay................... - Current[ 6]
Ch1 Command fine delay.................... - Current[10]
Ch1 Control fine delay.................... - Current[ 5]

Ch2 Clock Crossing Setting................ - More Aggressive
DIMM 3 Clock fine delay................... - Current[13]
DIMM 4 Clock fine delay................... - Current[ 5]
Ch2 Command fine delay.................... - Current[10]
Ch2 Control fine delay.................... - Current[ 4]

Ch1Ch2 CommonClock Setting................ - More Aggressive

Ch1 RDCAS GNT-Chip Delay.................. - Auto
Ch1 WRCAS GNT-Chip Delay.................. - Auto
Ch1 Command to CS Delay................... - Auto

Ch2 RDCAS GNT-Chip Delay.................. - Auto
Ch2 WRCAS GNT-Chip Delay.................. - Auto
Ch2 Command to CS Delay................... - Auto


Read delay phase adjust:

Channel 1 Phase 0 Pull-In................. - Auto
Channel 1 Phase 1 Pull-In................. - Auto
Channel 1 Phase 2 Pull-In................. - Auto
Channel 1 Phase 3 Pull-In................. - Auto
Channel 1 Phase 4 Pull-In................. - Auto

Channel 2 Phase 0 Pull-In................. - Auto
Channel 2 Phase 1 Pull-In................. - Auto
Channel 2 Phase 2 Pull-In................. - Auto
Channel 2 Phase 3 Pull-In................. - Auto
Channel 2 Phase 4 Pull-In................. - Auto
[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE:

 

normal_4240-Orthos.JPG

 

 

3dMark2003:

 

normal_4240-3D03.JPG

 

 

3dMark2005:

 

normal_4240-3D05.JPG

 

 

 

3dMark 2006:

 

normal_4240-3D06.JPG

 

 

 

==========

 

 

 

short description:

530x8 @ 4240Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Gigabyte GA-X38-DQ6, F6 BIOS

 

Crucial 4GB (4 x 1GB) DDR2 800 PC-6400

 

Intel Core 2 Duo E2160 Conroe 1.8GHz 1MB L2

 

Saphire HD 3870 512Mb 256 bit 777/1126 8.451 drivers

 

3x Hitatchi Deskstar 160Gb Sata 2 8Mb cache - raid 0-

 

LG 16x IDE DVD Writer

 

Enermax Liberty 620W Power Supply

 

 

Tuniq Tower

 

*

*

 

 

 

 

==========

 

 



[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=green]

Robust Graphics Booster............. - turbo	

CPU Clock Ratio..................... - 9x

CPU Host Clock Control.............. - Enabled	

CPU Host Frequency (Mhz)............ - 356

PCI Express Frequency (Mhz)......... - 100MHz

C.I.A.2............................. - Disabled

System Memory Multiplier (SPD)...... - Manual

Memory Frequency (Mhz).............. - 1068



DRAM Timing Selectable (SPD)........ - Manual

CAS Latency Time.................... - 5

DRAM RAS# to CAS# Delay............. - 5

DRAM RAS# Precharge................. - 5

Precharge Delay (tRAS).............. - 15

ACT to ACT Delay (tRRD)............. - Auto

Bank Write to READ Delay............ - Auto

Write to Precharch Delay............ - Auto

Refresh to ACT Delay................ - 42

Read to Precharge Delay............. - Auto

Memory Performance Enhance.......... - Normal

Command to #CS Delay___________ 2T



System Voltage Control.............. - Manual

DDR2 OverVoltage Control............ - 0.40V

PCI-E OverVoltage Control........... - Normal

FSB OverVoltage Control............. - 0.15V

(G)MCH OverVoltage Control.......... - 0.10V

CPU Voltage Control................. - 1.575

Normal CPU Vcore.................... - 1.325v

[/color]

 

 

==========

 

 

 

3D Mark01 + Orthos + CpuZ

 

ss1ef8.th.jpg

 

 

 

 

3D Mark03 + Everest read

 

3dmark03hy4.th.jpg

 

 

3D Mark05 + Vista experiance

 

3dmark05hv9.th.jpg

 

3D Mark06 + Superpi 1M

 

3dmark06vz8.th.jpg

 

 

 

 

 

 

Short description:

356x9 @ 3.2Ghz

DDR2 1068 5-5-5-15

Share this post


Link to post
Share on other sites

DFI LP UT P35-T2R (01/09/2008 Beta BIOS)

 

Intel E8500 (Q740A493T)

 

2x1024 Crucial Ballistix 8500

 

8800 Ultra @ 710/1140, 169.21 Drivers

 

2X36GB Western Digital Raptor 10,000RPM SATA hdd RAID 0

 

LITEON 832S DVD R/W

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

Genie BIOS Setting:



Exit Setup shutdown....................... - Mode 2

CLOCK VCO divider......................... - Auto

CPU Clock Ratio........................... - 9.5 X

CPU-N2 Ratio.............................. - Enabled

- Target CPU Clock........................ - 4607 MHz

CPU Clock................................. - 485 MHz

Boot Up Clock............................. - Auto

DRAM Speed................................ - 333/667

- Target DRAM Speed....................... - DDR2 971

PCIE Clock................................ - 100 MHz

PCIE Slot Config.......................... - 1X 1X



CPU Spread Spectrum....................... - Disabled

PCIE Spread Spectrum...................... - Disabled

SATA Spread Spectrum...................... - Disabled





CPU Feature:



Thermal Management Control................ - Disabled

PPM(EIST) Mode............................ - Enabled

Limit CPUID MaxVal........................ - Disabled

C1E Function.............................. - Disabled

Execute Disable Bit....................... - Disabled

Virtualization Technology................. - Disabled

Core Multi-Processing..................... - Enabled





Voltage Setting:



CPU VID Control........................... - 1.43570V

CPU VID Special Add....................... - 101.88%

DRAM Voltage Control...................... - 2.19V

SB 1.05V Voltage.......................... - 1.15V

SB Core/CPU PLL Voltage................... - 1.55V

NB Core Voltage........................... - 1.41V

CPU VTT Voltage........................... - 1.10V

Vcore Droop Control....................... - Disabled

Clockgen Voltage Control.................. - 3.45V

GTL+ Buffers Strenght..................... - Strong

Host Slew Rate............................ - Weak

GTL REF Voltage Control................... - Enabled

CPU GTL 1/3  REF Volt..................... - 65

CPU GTL 0/2  REF Volt..................... - 65

North Bridge GTL REF Volt................. - 65





DRAM Timing:



Enhance Data transmitting................. - Fast

Enhance Addressing........................ - Fast

T2 Dispatch............................... - Auto



CAS Latency Time (tCL).................... - 4

RAS# to CAS# Delay (tRCD)................. - 4

RAS# Precharge (tRP)...................... - 4

Precharge delay (tRAS).................... - 12

All Precharge to ACT...................... - AUTO

REF to ACT Delay (tRFC)................... - 24

Preformance LVL (Read delay).............. - AUTO



MCH ODT Latencey.......................... - AUTO

Write to PRE Delay (tWR).................. - AUTO

Rank Write to Read (tWTR)................. - AUTO

ACT to ACT Delay (tRRD)................... - AUTO

Read to Write Delay (tRDWR)............... - AUTO

Ranks Write to Write (tWRWR).............. - AUTO

Ranks Read to Read (tRDRD)................ - AUTO

Ranks Write to Read (tWRRD)............... - AUTO

Read CAS# Precharge (tRTP)................ - AUTO

All PRE to Refresh........................ - AUTO





Clock Setting Fine Delay:



Ch1 Clock Crossing Setting................ - More Aggressive

DIMM 1 Clock fine delay................... - Current[1486]

DIMM 2 Clock fine delay................... - Current[ 612]

Ch1 Command fine delay.................... - Current[1012]

Ch1 Control fine delay.................... - Current[ 562]



Ch2 Clock Crossing Setting................ - More Aggressive

DIMM 3 Clock fine delay................... - Current[1337]

DIMM 4 Clock fine delay................... - Current[ 524]

Ch2 Command fine delay.................... - Current[1086]

Ch2 Control fine delay.................... - Current[ 449]



Ch1Ch2 CommonClock Setting................ - More Aggressive



Ch1 RDCAS GNT-Chip Delay.................. - Auto

Ch1 WRCAS GNT-Chip Delay.................. - Auto

Ch1 Command to CS Delay................... - Auto



Ch2 RDCAS GNT-Chip Delay.................. - Auto

Ch2 WRCAS GNT-Chip Delay.................. - Auto

Ch2 Command to CS Delay................... - Auto





Read delay phase adjust:



Channel 1 Phase 0 Pull-In................. - Auto

Channel 1 Phase 1 Pull-In................. - Auto

Channel 1 Phase 2 Pull-In................. - Auto

Channel 1 Phase 3 Pull-In................. - Auto

Channel 1 Phase 4 Pull-In................. - Auto



Channel 2 Phase 0 Pull-In................. - Auto

Channel 2 Phase 1 Pull-In................. - Auto

Channel 2 Phase 2 Pull-In................. - Auto

Channel 2 Phase 3 Pull-In................. - Auto

Channel 2 Phase 4 Pull-In................. - Auto

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE:

 

normal_4_6-Orthos-stable.JPG

 

 

3dMark2003:

 

normal_4_6-3d03.JPG

 

 

3dMark2005:

 

normal_4_6-3d05.JPG

 

 

 

3dMark 2006:

 

normal_4_6-3d06.JPG

 

 

 

==========

 

 

 

short description:

485x9.5 @ 4607Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Abit IP35 Pro, V.10 BIOS

OCZ DDR2 PC2-6400 Platnum Revistion 2 2GB (2 x 1GB) DDR2-800 (ATI CrossFire Certified)

Intel Core 2 Duo E6750 Conroe 2.66GHz 4MB L2

ATI X1900XT @ 621/720

2 Seagate Barracuda 7200.10 120GB 7200 RPM 8MB Cache SATA 1.5Gb/s Hard Drive RAID0

Lite-on 20x DVD-RW drive

Hyper Type-R 580w

Zalman 9700LED

 

 

 

 

==========

 

 



[color=blue][b][size=4]µGuru Utility[/color][/b][/size]

[color=green]

CPU Operating Speed  2666 (333)

External Clock...................... - 400MHz

Multiplier Factor................... - X8

Esrimate New CPU Clock.............. - 3200MHz

Dram Speed (cpu : Dram) Default..... - (DDR2 - 800)

Pci Express Clock................... - 100MHz



[color=blue][b][size=4]Voltage Control[/color][/b][/size]



CPU Core Voltage.................... - 1.3500v

DDR2 Voltage........................ - 2.100v

CPU VTT 1.2v Voltage................ - 1.20v

MCH 1.25v Voltage................... - 1.25v

ICH 1.05v Voltage................... - 1.05v

ICHIO 1.5v Voltage.................. - 1.50v

DDR2 Reference Voltage.............. - 0%

CPU GTLREF 0&2...................... - 67%

CPU GTLREF 1&3...................... - 67%



[color=blue][b][size=4]Advanced Chipset Features[/color][/b][/size]



Cas Latency Time (tcL).............. - 4

Ras# to Cas# Delay (trcD)........... - 4

Ras# Precharge (tRP)................ - 4

Precharge Delay (tRAS).............. - 15

Refrech Cycle Time (tRFC)........... - auto

Write Recovery Time (twR)........... - auto

Write to Read Delay (tWTR).......... - auto

Act To Act Time (tRRD).............. - auto

Read ro Prechange (tRTP)............ - auto

Command Rate........................ - 2T

PCIe Complincy Mode................. - v1.0a

Reg Force X1........................ - Disabled

Init Display First.................. - PCIe X



[/color]

 

==========

 

 

Prime95+2xCPUZ+3DMarks01

32000mhz3dmark01bc5.th.jpg

 

3DMarks03

32000mhz3dmark03og7.th.jpg

 

3Dmarks05

32000mhz3dmarkd05hb8.th.jpg

 

3DMarks06

32000mhz3dmarkd06yo6.th.jpg

 

 

 

 

 

 

Short description:

400x8 @ 3.20Ghz

[email protected]

Share this post


Link to post
Share on other sites

Gigabyte GA-X38-DS4 (F2 01/02/08 bios)

G.Skill F2-6400PHU1-1GBHZ 4X1gb

Intel Core 2 Duo E8400 Wolfdale

EVGA e-GeForce 8800 GTS 640MB @ 600/1402/900

WD Raptor 74X2 Raid0

WD SATA 250gb

LiteOn DVD Opticals

Corsair TX750W

Swiftech Apex Ultra H20-220

 

[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=green]

Robust Graphics Booster............. - Turbo

CPU Clock Ratio..................... - 9x

CPU Host Clock Control.............. - Enable

CPU Host Frequency (Mhz)............ - 445

PCIe Frequency (Mhz)................ - Auto

Performance Mode.................... - Turbo

C.I.A.2............................. - Disabled

System Memory Multiplier (SPD)...... - 2.0d

Memory Frequency (Mhz).............. - 950





DRAM Timing Selectable (SPD)........ - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 4

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 12

ACT to ACT Delay (tRRD)............. - 6

Bank Write to READ Delay............ - 8

Write to Precharch Delay............ - 8

Refresh to ACT Delay................ - 40

Read to Precharge Delay............. - 6

Static tRead Value.................. - Auto

Static tRead Phase Adjustment....... - Auto



Clock & Skew Controls............... - all at defaults



System Voltage Control.............. - Manual

DDR2 OverVoltage Control............ - +0.25

PCI-E OverVoltage Control........... - +0.30

FSB OverVoltage Control............. - Normal

(G)MCH OverVoltage Control.......... - +0.100

MCH Reference Voltage Control....... - Normal

DDR Reference Voltage Control....... - Normal

DDR Termination Voltage Control..... - Normal

GTL Ref1 Voltage Ratio.............. - Normal

GTL Ref2 Voltage Ratio.............. - Normal

Loadline Calibration................ - Enable

CPU Voltage Control................. - 1.3000V

Normal CPU Vcore.................... - 1.2200V

[/color]

 

 

==========

3DMark01SE + Orthos + CpuZ

 

Orthos_CPUz_3DMark01.jpg

 

3DMark2003:

 

3DMark03.jpg

 

3DMark2005:

 

3DMark05.jpg

 

3DMark2006:

 

3DMark06.jpg

 

AquaMark

 

AquaMark3.jpg

 

Short description:

445x9 @ 4.0GHz

4-4-4-12

Share this post


Link to post
Share on other sites

Gigabyte GA-X38-DS4 (F2 01/02/08 bios)

G.Skill F2-6400PHU1-1GBHZ 4X1gb

Intel Core 2 Duo E8400 Wolfdale

EVGA e-GeForce 8800 GTS 640MB @ 600/1402/900

WD Raptor 74X2 Raid0

WD SATA 250gb

LiteOn DVD Opticals

Corsair TX750W

Swiftech Apex Ultra H20-220

 

[b]MB Intelligent Tweaker (M.I.T.)[/b]
[color=green]
Robust Graphics Booster............. - Turbo
CPU Clock Ratio..................... - 9x
CPU Host Clock Control.............. - Enable
CPU Host Frequency (Mhz)............ - 445
PCIe Frequency (Mhz)................ - Auto
Performance Mode.................... - Turbo
C.I.A.2............................. - Disabled
System Memory Multiplier (SPD)...... - 2.0d
Memory Frequency (Mhz).............. - 950


DRAM Timing Selectable (SPD)........ - Manual
CAS Latency Time.................... - 4 
DRAM RAS# to CAS# Delay............. - 4
DRAM RAS# Precharge................. - 4
Precharge Delay (tRAS).............. - 12
ACT to ACT Delay (tRRD)............. - 6
Bank Write to READ Delay............ - 8
Write to Precharch Delay............ - 8
Refresh to ACT Delay................ - 40
Read to Precharge Delay............. - 6
Static tRead Value.................. - Auto
Static tRead Phase Adjustment....... - Auto

Clock & Skew Controls............... - all at defaults

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - +0.25
PCI-E OverVoltage Control........... - +0.30
FSB OverVoltage Control............. - Normal
(G)MCH OverVoltage Control.......... - +0.100
MCH Reference Voltage Control....... - Normal
DDR Reference Voltage Control....... - Normal
DDR Termination Voltage Control..... - Normal
GTL Ref1 Voltage Ratio.............. - Normal
GTL Ref2 Voltage Ratio.............. - Normal
Loadline Calibration................ - Enable
CPU Voltage Control................. - 1.3000V
Normal CPU Vcore.................... - 1.2200V
[/color]

 

 

==========

3DMark01SE + Orthos + CpuZ

 

Orthos_CPUz_3DMark01.jpg

 

3DMark2003:

 

3DMark03.jpg

 

3DMark2005:

 

3DMark05.jpg

 

3DMark2006:

 

3DMark06.jpg

 

AquaMark

 

AquaMark3.jpg

 

Short description:

445x9 @ 4.0GHz

4-4-4-12

Share this post


Link to post
Share on other sites

EVGA 132-CK-NF78-A1 NVidia 780i SLI, P03 BIOS

 

Mushkin 2x2GB DDR2-1066 XP2-8500 (996562) (OoP)

 

Intel Core 2 Extreme QX6850 3GHz 8MB L2

 

eVGA 8800Ultra Superclocked 768MB 384-Bit GDDR3 PCI-E 16x

([email protected] Core/1665MHz Shader/1125Mhz Mem) 171.16 drivers

 

Western Digital Caviar SE WD3200YS 320GB 7200 RPM 8MB Cache SATA 3.0Gb/s &

Western Digital Caviar SE WD5000AAKS 500GB 7200RPM 8MB Cache SATA 3.0 Gb/s

 

HP dvd1040 External DVD+/-RW Drive

 

Ultra X3 1600 Watt Modular Power Supply (+12V ~ 117A)

 

DangerDen TDX775+Black Ice XtremeIII+Laing D5 Pump Cooling w/MCT-40 Coolant

 

 

 

==========

 

 

[b]FSB & Memory Config[/b]

CPU Freq, Mhz....................... - 3800.0

CPU Multiplier...................... - 9x

FSB - Memory Clock Mode............. - Linked

FSB - Memory Ratio ................. - Sync Mode

FSB - QDR (Mhz)..................... - 1689

MEM (DDR), Mhz...................... - 844.5



[b]Memory Timing Setting[/b]

Memopry Timing Setting.............. - Expert

tCL (CAS Latency)................... - 4 

tRCD................................ - 4

tRP................................. - 4

tRAS................................ - 12

Command Per Clock (CMD)............. - 2T



tRRD................................ - Auto (4)

tRC................................. - Auto (26)

tWR................................. - Auto (6)

tWTR................................ - Auto (9-10) (Varies between boots)

tREF................................ - Auto (7.8uS)



[b]System Clocks[/b]

CPU Multiplier...................... - 9x

PCIe x16_3 (Mhz).................... - Auto

PCIe x16_2 (Mhz).................... - Auto

PCIe x16_1 (Mhz).................... - Auto

nForce SPP --> nForce MCP........... - 5

nForce SPP <-- nForce MCP........... - 5



[b]System Voltages[/b]

CPU Core............................ - 1.4875v

CPU FSB............................. - 1.5v

Memory.............................. - 2.200v

nForce SPP.......................... - 1.45v

nForce MCP.......................... - 1.550v

HT nForce SPP <-> MCP............... - 1.35v

 

 

==========

 

 

 

Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE (65946):

 

th_22216_3DMark01SE-65946-Prime95-15hours-Everest-CPUz_122_232lo.jpg

 

3dMark2003: 47,423

 

th_22214_3DMark03-47423-CPUz_122_142lo.jpg

 

 

3dMark2005: 21,824

 

th_22211_3DMark05-21824_122_509lo.jpg

 

3dMark2006: 15,704

 

th_22209_3DMark06-15704_122_452lo.jpg

 

Aquamark3: 195796

 

th_22208_AM3-195796_122_412lo.jpg

 

 

 

 

Short description:

422.25x9 @ 3.8Ghz

4-4-4-12-2T

Share this post


Link to post
Share on other sites

DFI 975X/G Infinity, 2/27/2007 BIOS

 

OCZ2P8002GK (2x1GB PC-6400 4-5-4-15)

 

Intel Core 2 Quad Q6600 Revision G0

 

BFG 6600GT OC

 

1x WD 80GB IDE (OS) 1xSeagate 80GB SATA (Apps)

 

1x Seagate 400GB SATA (Samples) 1x Seagate 400GB SATA (Audio)

 

Presonus FP-10 Firewire Audio Interface

 

Samsung SE-S204 External DVD-RW drive

 

PC Power & Cooling Silencer 610W

 

 

*

*

 

 

*

*

 

 

==========

 

 



[b]Genie BIOS[/b]

[color=red]

Over Clock Mode Select.............. - Manual

PPM Function........................ - Disabled



CPU Clock Setting................... - 333Mhz

PCIE Clock Setting.................. - 100MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - Default

Default CPU Voltage................. - 1.28750v

CPU VTT Voltage Setting............. - 1.20v

DRAM Voltage Setting................ - 2.10v

NB Chip Voltage Setting............. - 1.60v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 5

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 15

System Memory Frequency............. - 667Mhz

Refresh Mode Select................. - 7.8

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

[/color]

 

 

==========

 

Multi-thread Prime95, 2x CPU-Z, 3dMark2001SE:

 

http://img.photobucket.com/albums/v356/djr...Screenshot1.jpg

 

3dMark2003:

 

http://img.photobucket.com/albums/v356/djr...Screenshot2.jpg

 

3dMark2005:

 

http://img.photobucket.com/albums/v356/djr...Screenshot3.jpg

 

3dMark2006:

 

http://img.photobucket.com/albums/v356/djr...Screenshot4.jpg

 

Aquamark 3d:

 

http://img.photobucket.com/albums/v356/djr...Screenshot5.jpg

 

Short description:

333x9 @ 3.01Ghz

4-5-4-15

Share this post


Link to post
Share on other sites

DFI LP UT P35-T2R (01/09/2008 Beta BIOS)

 

Intel E8500 (Q740A493T)

 

2x1024 OCZ PC9600 FLEX (OCZ2FX12001G)

 

8800 Ultra @ 710/1140, 169.21 Drivers

 

2X36GB Raptor RAID 0 / 250GB Caviar

 

LITEON 832S DVD R/W

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

Genie BIOS Setting:



Exit Setup shutdown....................... - Mode 2

CLOCK VCO divider......................... - Auto

CPU Clock Ratio........................... - 9.0 X

CPU-N2 Ratio.............................. - Disabled

- Target CPU Clock........................ - 4610 MHz

CPU Clock................................. - 512 MHz

Boot Up Clock............................. - Auto

DRAM Speed................................ - 333/800

- Target DRAM Speed....................... - DDR2 1230

PCIE Clock................................ - 100 MHz

PCIE Slot Config.......................... - 1X 1X



CPU Spread Spectrum....................... - Disabled

PCIE Spread Spectrum...................... - Disabled

SATA Spread Spectrum...................... - Disabled





CPU Feature:



Thermal Management Control................ - Enabled

PPM(EIST) Mode............................ - Enabled

Limit CPUID MaxVal........................ - Disabled

C1E Function.............................. - Auto

Execute Disable Bit....................... - Enabled

Virtualization Technology................. - Disabled

Core Multi-Processing..................... - Enabled





Voltage Setting:



CPU VID Control........................... - Auto

CPU VID Special Add....................... - 127.87%

DRAM Voltage Control...................... - 2.23V

SB 1.05V Voltage.......................... - 1.15V

SB Core/CPU PLL Voltage................... - 1.55V

NB Core Voltage........................... - 1.53V

CPU VTT Voltage........................... - 1.17V

Vcore Droop Control....................... - Enabled

Clockgen Voltage Control.................. - 3.45V

GTL+ Buffers Strenght..................... - Strong

Host Slew Rate............................ - Weak

GTL REF Voltage Control................... - Enabled

CPU GTL 1/3  REF Volt..................... - 68

CPU GTL 0/2  REF Volt..................... - 67

North Bridge GTL REF Volt................. - 69





DRAM Timing:



Enhance Data transmitting................. - Fast

Enhance Addressing........................ - Fast

T2 Dispatch............................... - Auto



CAS Latency Time (tCL).................... - 5

RAS# to CAS# Delay (tRCD)................. - 5

RAS# Precharge (tRP)...................... - 5

Precharge delay (tRAS).................... - 15

All Precharge to ACT...................... - 5

REF to ACT Delay (tRFC)................... - 35

Preformance LVL (Read delay).............. - 8



MCH ODT Latencey.......................... - AUTO

Write to PRE Delay (tWR).................. - 13

Rank Write to Read (tWTR)................. - 11

ACT to ACT Delay (tRRD)................... - 3

Read to Write Delay (tRDWR)............... - 8

Ranks Write to Write (tWRWR).............. - AUTO

Ranks Read to Read (tRDRD)................ - AUTO

Ranks Write to Read (tWRRD)............... - AUTO

Read CAS# Precharge (tRTP)................ - 3

All PRE to Refresh........................ - 5





Clock Setting Fine Delay:



Ch1 Clock Crossing Setting................ - More Aggressive

DIMM 1 Clock fine delay................... - Current[222]

DIMM 2 Clock fine delay................... - Current[623]

Ch1 Command fine delay.................... - Current[934]

Ch1 Control fine delay.................... - Current[690]



Ch2 Clock Crossing Setting................ - More Aggressive

DIMM 3 Clock fine delay................... - Current[222]

DIMM 4 Clock fine delay................... - Current[690]

Ch2 Command fine delay.................... - Current[934]

Ch2 Control fine delay.................... - Current[623]



Ch1Ch2 CommonClock Setting................ - More Aggressive



Ch1 RDCAS GNT-Chip Delay.................. - Auto

Ch1 WRCAS GNT-Chip Delay.................. - Auto

Ch1 Command to CS Delay................... - Auto



Ch2 RDCAS GNT-Chip Delay.................. - Auto

Ch2 WRCAS GNT-Chip Delay.................. - Auto

Ch2 Command to CS Delay................... - Auto





Read delay phase adjust:



Channel 1 Phase 0 Pull-In................. - Enabled

Channel 1 Phase 1 Pull-In................. - Enabled

Channel 1 Phase 2 Pull-In................. - Enabled

Channel 1 Phase 3 Pull-In................. - Enabled

Channel 1 Phase 4 Pull-In................. - Enabled



Channel 2 Phase 0 Pull-In................. - Enabled

Channel 2 Phase 1 Pull-In................. - Enabled

Channel 2 Phase 2 Pull-In................. - Enabled

Channel 2 Phase 3 Pull-In................. - Enabled

Channel 2 Phase 4 Pull-In................. - Enabled

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE:

 

normal_614-orthos.JPG

 

 

3dMark2003:

 

normal_03-614.JPG

 

 

3dMark2005:

 

normal_05-614.JPG

 

 

 

3dMark 2006:

 

normal_06-614.JPG

 

 

 

==========

 

 

 

short description:

512x9 @ 4610Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Asus Commando 1703-Beta (03/20/2008)

 

Intel Core 2 Duo E8400 'Wolfdale' (Q747A477)

 

2x 1024 OCZ SLI-Ready Edition PC2-8500 (OCZ2N1066R2GK)

 

EVGA GeForce 8800GT Superclocked (167.27 drivers)

 

Seagate Barracudo 320gb 7200.10

 

Zalman CNPS9700 LED

 

Corsair HX520

[b][color=blue]American Megatrends Inc. BIOS Settings:[/b][/color]
[color=red]
AI Tuning:				Manual
CPU Frequency:				525
DRAM Frequency:				DDR2-1050MHz
PCI Express Frequency:			Auto
PCI Clock Synchronization:		Auto
Spread Spectrum:			Auto

[color=blue][b]Over Voltage [/b][/color]
CPU VCore Voltage:			1.4625
FSB Termination Voltage:		1.550V
NB VCore:				Auto
Memory Voltage:				2.300V
DDRII Channel A REF Voltage:		DDRII_REF+10mv
DDRII Channel B REF Voltage:		DDRII_REF+10mv
DDRII Controller REF Voltage:		Auto
SB Vcore (SATA, PCIE):			Auto
SB Chipset Voltage:			Auto

Asus C.G.I:				Auto
Static Read Control:			Auto
Configure Timing by SPD:		Disabled
DRAM CAS# Latency:			5
DRAM RAS# to CAS# Delay:		5 DRAM Clocks
DRAM RAS# Precharge:			5 DRAM Clocks
DRAM RAS# Activate to Precharge delay:	15 DRAM Clocks
DRAM Write Recovery Time:		5 DRAM Clocks
DRAM TRFC:				42 DRAM Clocks
DRAM TRRD:				10
Rank Write to Read Delay:		10
Read to Precharge Delay:		10
Write to Precharge Delay:		11

[/color]

 

Bios

normal_IMG_2230.JPG

 

normal_IMG_2231.JPG

 

Orthos & 3dMark 01

normal_naamloos.JPG

 

3DMark 03

normal_3dmark03.JPG

 

3DMark 05

3dmark20051.JPG

 

3DMark 06

3dmark2006.JPG

 

Aquamark 3

aquamark3.JPG

 

Short description

8x525 = 4200mhz

[email protected]

Share this post


Link to post
Share on other sites

Gigabite p35 DS3R

Intel E8200 "wolfsdale" intel core duo

OCZ ddr2 pc2-6400 Gold kit, 4 gig.

Samsung 250 GB SAT2

Peak Radeon HD 3850, 512MB

TSST corp CDDVDW SH-S203W

Fortron BlueStorm 500w

 

 

[b]MB Intelligent Tweaker (M.I.T.)[/b]
[color=green]
Robust Graphics Booster............. - Auto
CPU Clock Ratio..................... - 8x
CPU Host Clock Control.............. - Enabled
CPU Host Frequency (Mhz)............ - 400
PCI Express Frequency (Mhz)......... - Auto
Performance Enhancer................ - Turbo
C.I.A.2............................. - Disabled
System Memory Multiplier (SPD)...... - 2.0
Memory Frequency (Mhz).............. - 800


DRAM Timing Selectable (SPD)........ - Auto
CAS Latency Time.................... - 5 
DRAM RAS# to CAS# Delay............. - 5
DRAM RAS# Precharge................. - 5
Precharge Delay (tRAS).............. - 18
ACT to ACT Delay (tRRD)............. - 3
Bank Write to READ Delay............ - 3
Write to Precharch Delay............ - 6
Refresh to ACT Delay................ - 46
Read to Precharge Delay............. - 3
tRD................................. - 9
tRD Phase Adjustment................ - 0

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - [+0.1]
PCI-E OverVoltage Control........... - Normal
FSB OverVoltage Control............. - [+0.1]
(G)MCH OverVoltage Control.......... - [+0.1]
CPU Voltage Control................. - Normal
Normal CPU Vcore.................... - 1.22500V
[/color]

 

 

bios screen 1

bios screen 2

cpu-z, orthos

 

 

 

3d mark03 screen:

 

P35_3D_MARK_O3_seond_bench%20(Medium).JPG

 

3d mark05 screen:

 

P35_3D_MARK_O5_seond_bench%20(Medium).JPG

 

P35_3D_MARK_O6_seond_bench%20(Medium).JPG

 

 

Short decription

8 x 400 = 3.20 Ghz

[email protected]

Share this post


Link to post
Share on other sites

GigaByte GA-P35-DS3L, F7 BIOS

 

OCZ Platinum Revision 2 DDR2 800 (PC2-6400) 4G (4 x 1GB) OCZ2P800R22GK

 

Intel Core 2 Duo E6300 Conroe 1.86GHz 2M shared L2 Cashe, MC-TDX

 

BFG Tech GeForce 7600GT 256MB 128-bit GDDR3 @ 650/832 ~ NVIDIA 169.21 drivers, Zalman VF900

 

Western Digital Caviar SE WD1600JS 160GB 7200 RPM 8MB Cashe SATA 3.0Gb/s

 

Lite On DVD Burner SHM-165H6S

 

OCZ GameXStream OCZ700GXSSLI ATX12V 700W

 

DD12V-D5 PumpBlack Ice GT Stealth 240 Rad.

 

 

============

 

 

[b]Advanced BIOS Features[/b]

[color=red]CPU Multi-Threading................. - Enabled
Limit CPUID Max. to 3............... - Disabled
No-Execute Memory Protect........... - Enabled
CPU Enhanced Halt (C1E)............. - Enabled
CPU Thermal Monitor 2(TM2).......... - Enabled
CPU EIST Function................... - Enabled
Virtualization Technology........... - Enabled
[/color]

[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=red]Robust Graphics Booster............. - Auto
CPU Clock Ratio..................... - 7x
CPU Host Clock Control.............. - Enabled
CPU Host Frequency (Mhz)............ - 444
PCI Express Frequency (Mhz)......... - Auto
C.I.A.2............................. - Disabled
Performance Enhancer................ - Standard
System Memory Multiplier (SPD)...... - 2.00
Memory Frequency (Mhz).............. - 888

DRAM Timing Selectable (SPD)........ - Manual
CAS Latency Time.................... - 5 
DRAM RAS# to CAS# Delay............. - 5
DRAM RAS# Precharge................. - 4
Precharge Delay (tRAS).............. - 14
ACT to ACT Delay (tRRD)............. - 3
Bank Write to READ Delay............ - 2
Write to Precharch Delay............ - 2
Refresh to ACT Delay................ - 36
Read to Precharge Delay............. - 2
tRD................................. - 8
tRD Phase Adjustment................ - 16	

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - [+0.3v]
PCI-E OverVoltage Control........... - Normal
FSB OverVoltage Control............. - Normal
(G)MCH OverVoltage Control.......... - [+0.1v]
CPU Voltage Control................. - [1.3125v]
Normal CPU Vcore.................... - 1.27500V
[/color]

 

============

 

 

Prime 95, CPU-Z, GPU-Z, 3Dmark2001SE:

 

3d01p958hrys8.th.jpg

 

 

3Dmark03:

 

3d03mf5.th.jpg

 

3Dmark05:

3d05wh3.th.jpg

 

 

3Dmark06:

 

3d06mp1.th.jpg

 

 

shot description:

444 x 7 @ 3108 MHz ~ 1.3125Vcore

4Gig DDR2 888 MHz (5-5-4-14-2T)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...