Jump to content
Angry_Games

Socket LGA775 Overclocking Database

Recommended Posts

Gigabyte GA-965P-DS3 Rev3.3, F10 BIOS

 

OCZ 2GB (2 x 1GB) DDR2-800 Platinum Rev. 2

 

Intel Core 2 Duo E4300 Allendale 1.8GHz 2MB L2

 

eVGA 7900GTO 512MB 256-bit GDDR3 PCI-E 16x 93.71 drivers 670 / 1350

 

2 x Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s RAID 0

 

LITE-ON Black 20X DVD+R SATA

 

CORSAIR CMPSU-620HX ATX12V v2.2 and EPS12V 2.91 620W Power Supply

 

Thermalright Ultra-120 CPU Cooling Heatsink

 

==========

 



[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=green]

Robust Graphics Booster............. - Auto

CPU Clock Ratio..................... - 9x

CPU Host Clock Control.............. - Enabled

CPU Host Frequency (Mhz)............ - 370

PCI Express Frequency (Mhz)......... - Auto

C.I.A.2............................. - Disabled

System Memory Multiplier (SPD)...... - 2.5

Memory Frequency (Mhz).............. - 925

High Speed DRAM DLL Settings........ - Option 1



DRAM Timing Selectable (SPD)........ - Auto

CAS Latency Time.................... - Auto 

DRAM RAS# to CAS# Delay............. - Auto

DRAM RAS# Precharge................. - Auto

Precharge Delay (tRAS).............. - Auto

ACT to ACT Delay (tRRD)............. - Auto

Bank Write to READ Delay............ - Auto

Write to Precharch Delay............ - Auto

Refresh to ACT Delay................ - 0 (Auto)

Read to Precharge Delay............. - Auto

Memory Performance Enhance.......... - Normal



System Voltage Control.............. - Manual

DDR2 OverVoltage Control............ - +0.3v

PCI-E OverVoltage Control........... - Normal

FSB OverVoltage Control............. - +0.1v

(G)MCH OverVoltage Control.......... - +0.1v

CPU Voltage Control................. - 1.4250v

Normal CPU Vcore.................... - 1.3250v

[/color]

 

 

==========

 

Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE:

http://img513.imageshack.us/my.php?image=s...icial800lo9.jpg

 

3dMark2003:

http://img142.imageshack.us/my.php?image=3...gcroppedgm6.jpg

 

3dMark2005:

http://img142.imageshack.us/my.php?image=3...gcroppedma0.jpg

 

3dMark2006:

http://img381.imageshack.us/my.php?image=3...gcroppedot1.jpg

 

Aquamark 3d:

http://img443.imageshack.us/my.php?image=a...officialpo8.jpg

 

Short description:

370x9 @ 3.33Ghz 1.425v

5-5-5-15 @ 2.1v

Share this post


Link to post
Share on other sites

DFI LanParty UT ICFX3200-T2R/G Crossfire (LGA 775), BIOS 12/22/2006

 

Intel Core 2 Duo E4300 Allendale 1.8GHz (1800Mhz / 2M L2 core)

 

G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2-800 (PC2 6400) F2-6400PHU2-2GBHZ

 

ATI 100-437509 Radeon X1600PRO 512MB 128-bit GDDR2 PCI-e x16

 

Western Digital Raptor WD36GB 10,000 RPM 16MB Cache SATA150 HDD

 

Lite-On Black 16X DVD-ROM 52X CD-R 32X CD-RW 52X CD-ROM 1.5MB Cache SATA Combo Drive

 

Corsair CMPSU-620HX 620W PSU

 

Cooler Master Gemin II Cooler w/X2 120mm Fans

 

North Bridge Cooler, Thermalright HR-05-SLI Copper Heatsinks

 

 

*

*

 

*

*

 

==========

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

CPU VID Control................ - 1.3875v

CPU VID Special Add............ - Auto

DDR2 RAM 1.8V Voltage.......... - 2.00V

CPU VTT 1.2V Voltage........... - 1.41V

NB Core 1.2V Voltage........... - 1.82V

NB PLL 1.8V Voltage............ - 1.93V

NB PLL 1.2V Voltage............ - 1.38V

NB PCI-E 1.2V Voltage.......... - 1.34V

NB Core 1.2V Convert From...... - 1.81V

SB Core 1.2V Voltage........... - 1.34V

Clockgen Voltage............... - 3.40V

GTL REF Voltage Control........ - Disable

CPU Core 1/2 GTL REF Volt...... - N/A

CPU Core 3/4 GTL REF Volt...... - N/A

North Bridge GTL REF Volt...... - 128

CPU PLL Setting Override....... - Enabled

PLL Override Loop Count........ - Auto

Conroe P-State Multiplier...... - x9

C1E Function................... - Disabled

[/color]



[b]Performance Options:[/b]

[color=red]

Memory Clock Frequency......... - DDR-533

Current Memory Clock........... - 533MHz

Control CPU Frequency.......... - Manual

CPU Frequency(MHz)............. - 345

NB FSB Strapping............... - 300

PCIE Overclock................. - 100

Software Reset Clockgen........ - Enabled

Memory Overclocking............ - Enabled

Overclocking Frequency(MHz).... - 460

[/color]



[b]Northbridge Selections:[/b]

[color=red]

Memory Channels................ - Channel A and B

Memory Power Management........ - Disabled

IGD Clock Gate................. - Disable

NB Channel Mapping............. - Auto

Simple Addr Translation........ - Disable

Chip-Select Swap............... - Disable

Burst Lenght................... - 8

Bank0 Map GFX.................. - 4

Bank1 Map GFX.................. - 5

Bank2 Map GFX.................. - 6

Channel Mapping NB............. - 5

Channel Mapping GFX............ - 1

Bank0 Map NB................... - 5

Bank1 Map NB................... - 11

Bank2 Map NB................... - 7

[/color]



[b]Memory Timing Menu:[/b]

[color=red]

CS Output Timing............... - Delay 1/4 Clock

CK Output Timing............... - Auto

Duel Channel Split Mode........ - Auto

Addr/CMD Driving Pre-Amp....... - Enabled

Addr/CMD Driving Strength...... - 06

Clocking Driving Pre-Amp....... - Always

Clocking Driving Strength...... - 06 

Address/Command Timing......... - Auto

Memory Timing Select........... - Manual

CAS Timing (TCAS).............. - 5

Read RAS-CAS Delay (TRCDT)..... - 7

Write RAS-CAS Delay (TRCDR).... - 7

RAS Precharge Time TRP......... - 7

Cycle Time (TRAS).............. - 21

Row Cycle Time (TRC)........... - 26

Refresh To Active (TRFC)....... - 43

Bank To Bank CMD (TRRD)........ - 4

Write Recovery (TWR)........... - 9

Read-Write Command (TRTW)...... - 3

Write-Write CS (TRTR_CS)....... - 2

Write -Read Commad (TWTR)...... - 6

Write-Read CS (TWTR_CS)........ - 2

Read-Read CS (TRTR_CS)......... - 2

Read Data Transfer............. - 5

[/color]



[b]Memory Timing Menu:[/b]

[color=red]

Read Data Transfer............. - Enable

Read Strobe Delay.............. - Disable

Read Strobe Arrival............ - Enable

[/color]



[b]FSB IO Strength:[/b]

[color=red]

FSB IO Driving Control......... - Manual

1X NMOS Strength............... - 10h

1X PMOS Strength............... - 10h

2X NMOS Strength............... - 10h

2X PMOS Strength............... - 10h

4X NMOS Strength............... - 10h

4X PMOS Strength............... - 10h



[/color]

 

 

==========

 

 

Orthos (SP2004) + 3dMark2001SE + 3x CPU-Z + Everest Ultimate:

 

thumb_OCDB1_e4300_icfx3200.jpg

 

 

3dMark2003:

 

thumb_OCDB1_e4300_icfx3200_3dMark03.jpg

 

 

3dMark2005:

 

thumb_OCDB1_e4300_icfx3200_3dMark05.jpg

 

 

3dMark2006:

 

thumb_OCDB1_e4300_icfx3200_3dMark06.jpg

 

 

==========

 

 

 

short description:

345x9 @ 3100MHz 1.3875vCore / 2.00vDimm

5-7-7-21

Share this post


Link to post
Share on other sites

DFI 975X/G Infinity, 2/27/07 BIOS

 

OCZ 2GB (2 x 1GB) DDR2-800 (ATI CrossFire Certified)

 

Intel Core 2 Duo E4300 1.8GHz

 

Power Color x1900xtx @ 675-783 with 7.1 drivers

 

160gig Seagate Sata Drive

 

NEC 3550A DVD-RW drive

 

PcPower & Cooling SILENCER 610 PSU

 

Danger Den Water Cooling = TDX+Maze4+BIX2+DDC-12v+38 tubing

 

 

*

*

 

 

*

*

 

 

==========

 

 



[b]Genie BIOS[/b]

[color=red]

FSB 800mhz CPU enhanced mode.............. - Enabed

PPM Function........................ - Enabled



CPU Clock Setting................... - 356Mhz

System Memory Frequency............. - 667Mhz

PCIE Clock Setting.................. - 110MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting..............  -  +137.5mv

Default CPU Voltage................. - 1.32500v

CPU VTT Voltage Setting............. - 1.30v

DRAM Voltage Setting................ - 2.20v

NB Chip Voltage Setting............. - 1.70v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 5

DRAM RAS# to CAS# Delay............. - 5

DRAM RAS# Precharge................. - 5

Precharge Delay (tRAS).............. - 15

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

[/color]

 

 

==========

 

 

 

Orthos (dual-prime95), CPU-Z, 3dMark2001SE:

 

http://diy-street.com/upload/thunda/3200mhzC2D/3dmark01.JPG

 

 

 

3dMark2003:

 

http://diy-street.com/upload/thunda/3200mhzC2D/3dmark03.JPG

 

 

 

3dMark2005:

 

http://diy-street.com/upload/thunda/3200mhzC2D/3dmark05.JPG

 

 

 

3dMark2006:

 

http://diy-street.com/upload/thunda/3200mhzC2D/3dmark06.JPG

 

 

 

Aquamark 3d:

 

http://diy-street.com/upload/thunda/3200mhzC2D/aq3.JPG

 

 

 

 

Short description:

356x9 @ 3204mhz

5-5-5-15

Share this post


Link to post
Share on other sites

DFI INFINITY 975 x/g [12/01/06 BIOS]

 

Corsair XMS2 2 gig (1Gig X 2) DDR800 PC6400 [Duel channel]

 

Intel Core 2 Duo E6300 [batch: L629B041] (1.86 Ghz)

 

OCZ GameXStream 600W PSU

 

EVGA 8800 GTS 640MB pci-e (flashed with superclock bios)

 

Western Digital 200gb Caviar SATA 7200RPM HDD

 

Swiftech HP-120 Prem Watercooling kit (swapped: res and pump top)

Swiftech Micro Res

DDC Delrin pump top

 

//

 

dsc01013wc5.th.jpg

 

dsc01014aw0.th.jpg

[B]Genie Bios:[/B]

[SIZE="2"]PPM function......................Disabled
CPU clock..........................429MHz
PCIE Clock.........................105MHz
SATA Clock........................Fix 100MHz

CPU VID............................+ 125.0mV
Default VID........................1.32500V
CPU VTT............................1.30V
DRAM Voltage......................2.00
NB Voltage..........................1.70V

Auto Detect PCI...................Enabled
Spread Spectrum..................Disabled
Memory Hole Remap..............Enabeld[/SIZE]

[B]DRAM timing and Config:[/B]
[SIZE="2"]DRAM timing Select..............Manual
CAS Latency.......................5
DRAM RAS# to CAS# Delay....5
DRAM RAS# Precharge..........5
Precharge Delay (tRAS).........12
System Memory Freq............400
Refreash Mose Select...........7.8 us
Data A Drive Strength...........3.00X
Data B Drive Strength............3.00X
x8 Control Drive Strength.......3.00X
x16 Control Drive Strength......3.00X
x8 Clock Drive Strength...........3.00X
x16 Clock Drive Strength..........3.00X
Command A Drive Strength.......3.00X
Command B Drive Strength........3.00X[/SIZE]

3dmark05 (pro)

w0otjo0.png

3dmark03(free)

3dmark03wi5.th.png

3dmark06(free)

3dmark06si6.th.png

 

Orthos 2CPUz 3dmark01se:

3d013cpuzorthosuc4.th.jpg

E6300 on DFI975x/g (12/01/06)

429X7 = 3003Mhz

5-5-5-12

Share this post


Link to post
Share on other sites

DFI INFINITY 975X/G REVISION B (97TID227 BIOS)

 

INTEL CORE 2 DUO E6600 CONROE 2.4GHZ 4MB L2 CACHE + TUNIQ TOWER 120

 

2GB BUFFALO FIRESTIX (2 x 1GB) PC2-6400

 

INNO3D 8800GTS 320MB OC: 595/1880 97.92 DRIVERS

 

250GB MAXTOR MAX-LINE SATA-2 HDD (7V250FO)

 

SONY DL DVD-RW DRU-820A

 

OCZ GAMEXSTREEM 700W PSU

 

==========



[B]Advanced BIOS Feature / CPU Feature[/B]



[COLOR=red]Delay Prior To Thermal.............. - 16[/COLOR]

[COLOR=red]Limit CPUID MaxVal.................. - Disabled[/COLOR]

[COLOR=red]CIE Function........................ - Auto[/COLOR]

[COLOR=red]Execute Disable Bit................. - Enabled[/COLOR]

[COLOR=red]Virtualization Technology........... - Enabled[/COLOR]

[COLOR=red]Frequency Unlimit................... - Disabled[/COLOR]



[B]Genie BIOS[/B]



[COLOR=red]DRAM Timing Config.................. - Manual[/COLOR]

[COLOR=red]PPM Function........................ - Enabled[/COLOR]



[B][COLOR=black]Ratio & Clock Setting[/COLOR][/B]



[COLOR=red]Current CPU Speed................... - 3699Mhz[/COLOR]

[COLOR=red]CPU Clock Ratio Setting............. - x 9[/COLOR] 

[COLOR=red]CPU Clock Setting................... - 411Mhz[/COLOR]

[COLOR=red]Current DRAM Speed.................. - 822Mhz[/COLOR]

[COLOR=red]System Memory Frequency............. - 533Mhz[/COLOR]

[COLOR=red]PCIE Clock Setting.................. - 100MHz[/COLOR]

[COLOR=red]SATA Clock Sync. With............... - Fix 100Mhz[/COLOR]



[B][COLOR=black]Voltage Setting[/COLOR][/B]



[COLOR=red]CPU VID Offset Setting...............- + 237.0mV[/COLOR]

[COLOR=red]Default CPU Voltage................. - 1.300v[/COLOR]

[COLOR=red]CPU VTT Voltage Setting............. - 1.30v[/COLOR]

[COLOR=red]DRAM Voltage Setting................ - 2.20v[/COLOR]

[COLOR=red]NB Chip Voltage Setting............. - 1.70v[/COLOR]



[COLOR=black][B]Miscellaneous[/B][/COLOR]



[COLOR=red]Auto Detect PCI Clock............... - Enabled[/COLOR]

[COLOR=red]Spread Spectrum..................... - Disabled[/COLOR]

[COLOR=red]Memory Hole Remapping............... - Enabled[/COLOR]



[B]DRAM Timing and Config[/B]



[COLOR=red]CAS Latency Time.................... - 4 [/COLOR]

[COLOR=red]DRAM RAS# to CAS# Delay............. - 4[/COLOR]

[COLOR=red]DRAM RAS# Precharge................. - 4[/COLOR]

[COLOR=red]Precharge Delay (tRAS).............. - 12[/COLOR]

[COLOR=red]Refresh Mode Select................. - 15.6[/COLOR]

[COLOR=red]Write to Precharge Delay............ - Auto[/COLOR]

[COLOR=red]Write to Read Delay (Same).......... - Auto[/COLOR]

[COLOR=red]Write to Read Delay (Diff).......... - Auto[/COLOR]

[COLOR=red]Read to Write Delay................. - Auto[/COLOR]

[COLOR=red]Write Recovery...................... - Auto[/COLOR]

[COLOR=red]Read Recovery....................... - Auto[/COLOR]

[COLOR=red]Read Delay.......................... - 6[/COLOR]

[COLOR=red]Data A Drive Strength............... - Auto[/COLOR]

[COLOR=red]Data B Drive Strength............... - Auto[/COLOR]

[COLOR=red]x8 Control Drive Strength........... - Auto[/COLOR]

[COLOR=red]x16 Control Drive Strength.......... - Auto[/COLOR]

[COLOR=red]x8 Clock Drive Strength............. - Auto[/COLOR]

[COLOR=red]x16 Clock Drive Strength............ - Auto[/COLOR]

[COLOR=red]Command A Drive Strength............ - Auto[/COLOR]

[COLOR=red]Command B Drive Strength............ - Auto[/COLOR]

[COLOR=red]DRAM Data Integrity Mode............ - NON-ECC[/COLOR]

 

==========

 

Stress Prime 2004 Orthos Edition + 2x CPU-Z + 3dMark2001SE:

 

975X-3DMARK01.jpg

 

3dMark2003:

 

975X-3DMARD03.jpg

 

3dMark2005:

 

975X-3DMARK05.jpg

 

3dMark2006:

 

975X-3DMARK06.jpg

 

Short description:

DFI Infinity 975X/G REV B

E6600 @ 411 x 9 = 3708MHZ 1.300V + .237MV

2 X 1GB BUFFALO FIRESTIX PC2-6400 @ 4-4-4-12 2.20V

Share this post


Link to post
Share on other sites

DFI INFINITY 975 x/g [12/01/06 BIOS]

 

Intel Core 2 Duo X6800 [batch: L632A430] (2.93 Ghz)

 

Mushkin Redline PC2-8000 4-5-4-11

 

OCZ GameXStream 700W PSU

 

Nvidia EVGA 7950X2 1400/625

 

Western Digital RaptorX 150GB

(3) Seagate Barracuda 400GB SATA

 

.:Cooling:.

Swiftech Storm Rev2 Block

Swiftech MCP655™ 12 VDC Pump

Swiftech MCR320 QP 3X120mm Rad

 

[B]Genie Bios:[/B]

[SIZE="2"]PPM function......................Disabled
CPU clock..........................340MHz
PCIE Clock.........................105MHz
SATA Clock........................Fix 100MHz

CPU VID............................+ 250.0mV
Default VID........................1.32500V
CPU VTT............................1.30V
DRAM Voltage......................2.35
NB Voltage..........................1.60V
Auto Detect PCI...................Enabled
Spread Spectrum..................Disabled
Memory Hole Remap..............Enabeld[/SIZE]

[B]DRAM timing and Config:[/B]
[SIZE="2"]DRAM timing Select..............Manual
CAS Latency.......................4
DRAM RAS# to CAS# Delay....5
DRAM RAS# Precharge..........4
Precharge Delay (tRAS).........11
System Memory Freq............800
Refresh Mose Select...........15.6 us
Write to Precharge Delay.........13
Write to Read Delay (same).....11
Write to Read Delay (diff)........2
Read to Write Delay................2
Write Recovery.......................1
Read Recovery.......................1
Data A Drive Strength...........3.00X
Data B Drive Strength............3.00X
x8 Control Drive Strength.......2.25X
x16 Control Drive Strength......2.25X
x8 Clock Drive Strength...........2.25X
x16 Clock Drive Strength..........2.25X
Command A Drive Strength.......2.25X
Command B Drive Strength........2.25X[/SIZE]

 

 

3dMark2001SE/Everest/Orthos Prime

 

normal_340x9-1_325+250mV-3dmark2001se-1.png

 

3dMark03

 

normal_340x9-1_325+250mV-3dmark03.png

 

3dMark05

 

normal_340x9-1_325+250mV-3dmark05-1.png

 

3dMark06

 

normal_340x9-1_325+250mV-3dmark06-1.png

 

Aquamark3

 

340x9-1_325+250mV-Aquamark-1.png

 

 

X6800 on DFI975x/g (12/01/06)

340X11 = 3750Mhz

4-5-4-11

Share this post


Link to post
Share on other sites

DFI LANPARTY UT ICFX3200-T2R/G REV.A (BETA BIOS R6T_041)

 

INTEL CORE 2 DUO E6400 CONROE 2.13GHZ 2M L2 CACHE

 

OCZ PC2-8500 2GB (2 x 1GB) PN:OCZN1066SR2GK

 

XFX 6800GT 256MB ARCTIC COOLING NV SILENCER 5 (93.71 Drivers)

 

MAXTOR SATA II 250GB HDD (7V250FO)

 

SONY DUAL LAYER DVD RW (DRU-820A)

 

OCZ GAMEXSTREEM 700W PSU

 

[B]Genie BIOS Settings:[/B]

[COLOR=red]CPU VID Control................ - 1.54375V[/COLOR]
[COLOR=red]CPU VID Special Add............ - Auto[/COLOR]
[COLOR=red]DDR2 RAM 1.8V Voltage.......... - 2.20V[/COLOR]
[COLOR=red]CPU VTT 1.2V Voltage........... - 1.39V[/COLOR]
[COLOR=red]NB Core 1.2V Voltage........... - 1.59V[/COLOR]
[COLOR=red]NB PLL 1.8V Voltage............ - 2.03V[/COLOR]
[COLOR=red]NB PLL 1.2V Voltage............ - 1.38V[/COLOR]
[COLOR=red]NB PCI-E 1.2V Voltage.......... - 1.34V[/COLOR]
[COLOR=red]NB Core 1.2V Convert From...... - 2.14V[/COLOR]
[COLOR=red]SB Core 1.2V Voltage........... - 1.34V[/COLOR]
[COLOR=red]Clockgen Voltage............... - 3.40V[/COLOR]
[COLOR=red]GTL REF Voltage Control........ - Disabled[/COLOR]
[COLOR=red]CPU Core 1/2 GTL REF Volt...... - 48[/COLOR]
[COLOR=red]CPU Core 3/4 GTL REF Volt...... - 48[/COLOR]
[COLOR=red]North Bridge GTL REF Volt...... - 128[/COLOR]
[COLOR=red]CPU PLL Setting Override....... - Enable[/COLOR]
[COLOR=red]PLL Override Loop Count........ - Auto[/COLOR]
[COLOR=red]Conroe P-State Multiplier...... - x 8[/COLOR]
[COLOR=red]C1E Function................... - Disabled[/COLOR]

[B]Performance Options:[/B]

[COLOR=red]Memory Clock Frequency......... - Auto[/COLOR]
[COLOR=red]Current Memory Clock........... - 533[/COLOR]
[COLOR=red]Control CPU Frequency.......... - Manual[/COLOR]
[COLOR=red]CPU Frequency(MHz)............. - 450[/COLOR]
[COLOR=red]NB FSB Strapping............... - 333[/COLOR]
[COLOR=red]PCIE Overclock................. - 100[/COLOR]
[COLOR=red]Software Reset Clockgen........ - Disabled[/COLOR]
[COLOR=red]Memory Overclocking............ - Enable[/COLOR]
[COLOR=red]Overclocking Frequency(MHz).... - 571[/COLOR]

[B]Northbridge Selections:[/B]

[COLOR=red]Memory Channels................ - Auto[/COLOR]
[COLOR=red]Memory Power Management........ - Disabled[/COLOR]
[COLOR=red]IGD Clock Gate................. - Disabled[/COLOR]
[COLOR=red]NB Channel Mapping............. - Auto[/COLOR]
[COLOR=red]Simple Addr Translation........ - Disable[/COLOR]
[COLOR=red]Chip-Select Swap............... - Disable[/COLOR]
[COLOR=red]Burst Lenght................... - 8[/COLOR]
[COLOR=red]Bank0 Map GFX.................. - 4[/COLOR]
[COLOR=red]Bank1 Map GFX.................. - 5[/COLOR]
[COLOR=red]Bank2 Map GFX.................. - 6[/COLOR]
[COLOR=red]Channel Mapping NB............. - 5[/COLOR]
[COLOR=red]Channel Mapping GFX............ - 1[/COLOR]
[COLOR=red]Bank0 Map NB................... - 5[/COLOR]
[COLOR=red]Bank1 Map NB................... - 11[/COLOR]
[COLOR=red]Bank2 Map NB................... - 7[/COLOR]

[B]Memory Timing Menu:[/B]

[COLOR=red]CS Output Timing............... - Delay 1/4 Clock[/COLOR]
[COLOR=red]CK Output Timing............... - Auto[/COLOR]
[COLOR=red]Duel Channel Split Mode........ - Auto[/COLOR]
[COLOR=red]Addr/CMD Driving Pre-Amp....... - Disable[/COLOR]
[COLOR=red]Addr/CMD Driving Strength...... - 05[/COLOR]
[COLOR=red]Clocking Driving Pre-Amp....... - Always[/COLOR]
[COLOR=red]Clocking Driving Strength...... - 05 [/COLOR]
[COLOR=red]Address/Command Timing......... - 2T[/COLOR]
[COLOR=red]Memory Timing Select........... - Manual[/COLOR]
[COLOR=red]CAS Timing (TCAS).............. - 5[/COLOR]
[COLOR=red]Read RAS-CAS Delay (TRCDT)..... - 5[/COLOR]
[COLOR=red]Write RAS-CAS Delay (TRCDR).... - 4[/COLOR]
[COLOR=red]RAS Precharge Time TRP......... - 5[/COLOR]
[COLOR=red]Cycle Time (TRAS).............. - 8[/COLOR]
[COLOR=red]Row Cycle Time (TRC)........... - 8[/COLOR]
[COLOR=red]Refresh To Active (TRFC)....... - 32[/COLOR]
[COLOR=red]Bank To Bank CMD (TRRD)........ - 3[/COLOR]
[COLOR=red]Write Recovery (TWR)........... - 3[/COLOR]
[COLOR=red]Read-Write Command (TRTW)...... - 3[/COLOR]
[COLOR=red]Write-Write CS (TRTR_CS)....... - 2[/COLOR]
[COLOR=red]Write -Read Commad (TWTR)...... - 3[/COLOR]
[COLOR=red]Write-Read CS (TWTR_CS)........ - 2[/COLOR]
[COLOR=red]Read-Read CS (TRTR_CS)......... - 2[/COLOR]
[COLOR=red]Read Data Transfer............. - 5[/COLOR]

[B]Memory Timing Menu:[/B]

[COLOR=red]Read Data Transfer............. - Enable[/COLOR]
[COLOR=red]Read Strobe Delay.............. - Disable[/COLOR]
[COLOR=red]Read Strobe Arrival............ - Enable[/COLOR]

[B]FSB IO Strength:[/B]

[COLOR=red]FSB IO Driving Control......... - Default[/COLOR]
[COLOR=red]1X NMOS Strength............... - 10h[/COLOR]
[COLOR=red]1X PMOS Strength............... - 10h[/COLOR]
[COLOR=red]2X NMOS Strength............... - 10h[/COLOR]
[COLOR=red]2X PMOS Strength............... - 10h[/COLOR]
[COLOR=red]4X NMOS Strength............... - 10h[/COLOR]
[COLOR=red]4X PMOS Strength............... - 10h[/COLOR]

 

Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z

 

ICFXE64003.jpg

 

3dMark2003:

 

ICFXE64003-1.jpg

 

3dMark2005:

 

ICFXE64003-2.jpg

 

3dMark2006:

 

ICFXE64003-3.jpg

 

short description:

450 x 8 = 3.6GHZ @ 1.54375v

5-5-5-8 2T @ 2.2V DDR 1142

Share this post


Link to post
Share on other sites

ASUS P5N32-E SLI, 1002 BIOS

 

OCZ Gold 2GB (2 x 1GB) DDR2-1100 (OCZ2G11002GK)

 

Intel Core 2 Duo E6300 Conroe 1.86GHz 2M shared L2 Cashe (L651B240), Swifttech Storm Rev.2

 

BFG 8800GTX 768MB 384-bit GDDR3 PCI-E x16 @ 600/900 ~ NVIDIA 158.19 drivers, DD NV-88GTX

 

2x Western Digital Caviar SE WD1600JS 160GB 7200 RPM 8MB Cache SATA 3.0Gb/s RAID-0

 

SONY DVD RW DRU-700A

 

PC Power & Cooling Silencer 750 Quad (Black)

 

NB Cooling = DD-680i Chipset Block ~ Modded

 

SB Cooling = Thermaltake Extreme Spirit II

 

Mosfet Cooling = 2x Thermalright HR-09U

 

 

*BIOS ScreenShots*

 

extremetweakereh0.jpg

 

systemclocksit8.jpg

 

fsbmemoryconfighc4.jpg

 

overclockingfh9.jpg

 

memorytimingsettinguf4.jpg

 

spreadspectrumcontrolou1.jpg

 

overvoltagedb4.jpg

 

 

========================

[b]Extreme Tweaker[/b]
[color=red]
 AI Tuning................................... – Manual[/color]
[color=grey]x Overclock Options........................... – Disabled
x N.O.S Options............................... – Disabled[/color][color=red]
> System Clocks
> FSB & Memory Config
> Overclocking
> Over Voltage
 SLI Broadcast Aperture...................... – Disabled 
 NVIDIA GPU Ex............................... – Disabled
 SLI-Ready Memory............................ – Not Detected[/color]


[b]System Clocks[/b]
[color=red]
PCIEX16_1 Frequency (MHz).................... – 100
PCIEX16_2 Frequency (MHz).................... - 100
PCIEX16_3 Frequency (MHz).................... - 100
SPP<->MCP Ref Clock, MHz..................... – Auto[/color]


[b]FSB & Memory Config[/b]
[color=red]
  FSB – Memory Clock Mode.................... – Linked
  FBS – Memory Rotio......................... – Sync Mode
  FSB (QDR), MHz............................. – 2060[/color]
[color=grey]Actual FSB (QDR), MHz..................... - 2060
x MEM (DDR), Mhz............................. – Linked
Actual MEM (DDR), MHz..................... - 1030[/color]


[b]Overclocking[/b] 
[color=red]
 CPU Multiplier.............................. – 7
> Memory Timing Setting
> Spread Spectrum Control
 CPU Internal Thermal Control................ – Disabled
 Limit CPUID MaxVal.......................... – Disabled
 Enhanced C1 (C1E) .......................... – Disabled
 Execute Disable Bit......................... – Disabled
 Virtualization Technology................... – Disabled
 Enhanced Intel SpeedStep™ Tech.............. – Disabled
 LDT Frequency............................... - 5x [/color]


[b]Memory Timng Setting[/b]
[color=red]
tCL (CAS Latency)............................ - 5 
tRCD......................................... – 5  
tRP.......................................... - 5
tRAS......................................... - 15
Command Per Clock (CMD)...................... – 2 clock

** Advanced Memory Settings **
tRRD......................................... - 5
tRC.......................................... – 27
tWR.......................................... - 6
tWTR......................................... - 10
tREF......................................... – 2 
tRD.......................................... - 12
tRFC......................................... - 58
Async Latency................................ – Auto[/color]


[b]Spread Spectrum Control[/b]
[color=red]
[color=grey]x CPU Spread Spectrum........................ – Disable[/color]
  PCIE Spread Spectrum....................... - Disabled
  MCP PCIE Spread Spectrum................... - Disabled
  SATA Spread Spectrum....................... - Disabled
  LDT Spread Spectrum........................ – Disabled[/color]


[b]Over Voltage[/b]
[color=red]
VCore Voltage................................. - 1.47500V
Memory Voltage................................ – 2.275V
1.2V HT Voltage............................... – 1.30V
NB Core Voltage............................... - 1.65V
SB Core Voltage............................... - 1.55V
CPU VTT Voltage............................... - 1.40v
DDRII Controller Ref Voltage.................. – DDR2_Vol/2+20mv
DDRII Channel A Ref Voltage................... – DDR2_Vol/2+20mv
DDRII Channel B Ref Voltage................... – DDR2_Vol/2+20mv
[/color]

 

 

 

==========

 

 

Orthos - Everest 4.0 – 2x CPUz - 3DMark2001SE:55484

3604mhz011ejf5.th.jpg

 

3DMark2003:40791

3604mhz031emv4.th.jpg

 

3DMark2005:19201

3604mhz051ebg4.th.jpg

 

3DMark2006:11960

3604mhz061ezi6.th.jpg

 

Short description:

E6300 515x7 @ 3.6Ghz

5-5-5-15

Share this post


Link to post
Share on other sites

ASUS STRIKER EXTREME (BIOS 1102)

 

INTEL CORE 2 DUO E6600 CONROE 2.4GHZ 4M L2 CACHE

 

OCZ PC2-8500 SLI 2GB (2 x 1GB) PN:OCZN1066SR2GK

 

INNO3D 8800GTS 320MB OC 595/950 (158.19 DRIVERS)

 

MAXTOR SATA II 250GB HDD (7V250FO)

 

SONY DUAL LAYER DVD RW (DRU-820A)

 

OCZ GAMEXSTREEM 700W PSU

 

[B]Extreme Tweaker:[/B]

[COLOR=red]AI Tuning...................... - Manual[/COLOR]
[COLOR=red]x Overclock Options............ - Disabled[/COLOR]
[COLOR=red]x N.O.S Options................ - Disabled[/COLOR]
[COLOR=red]> System Clocks[/COLOR]
[COLOR=red]> FSB & Memory Config[/COLOR]
[COLOR=red]> Overclocking[/COLOR]
[COLOR=red]> Over Voltage[/COLOR]
[COLOR=red]SLI Broadcast Aperture......... - Disabled[/COLOR]
[COLOR=red]NVIDIA GPU EX.................. - Disabled[/COLOR]
[COLOR=red]SLI - Ready Memory............. - Disabled Disabled[/COLOR]

[B]System Clocks:[/B]

[COLOR=red]PCIEX16_1 Frequency (MHz)...... - 100[/COLOR]
[COLOR=red]PCIEX16_2 Frequency (MHz)...... - 100[/COLOR]
[COLOR=red]PCIEX16_3 Frequency (MHz)...... - 100[/COLOR]
[COLOR=red]SPP <-> MCP Ref Clock, MHz..... - Auto[/COLOR]

[B]FSB & Memory Cinfig:[/B]

[COLOR=red]FSB - Memory Clock Mode........ - linked[/COLOR]
[COLOR=red]x FSB - Memory Ratio........... - Sync[/COLOR]
[COLOR=red]FSB (QDR), MHz................. - 1600[/COLOR]
[COLOR=red]Actual FSB (QDR), MHz.......... - 1600[/COLOR]
[COLOR=red]MEM (DDR), MHz................. - 800[/COLOR]
[COLOR=red]Actual MEM (DDR), MHz.......... - 800[/COLOR]

[B]Overclocking:[/B]

[COLOR=red]CPU Type - Intel (R) Core (TM) 2 CPU[/COLOR]
[COLOR=red]CPU Speed...................... - 3.6GHz[/COLOR]
[COLOR=red]Cache RAM...................... - 4096k[/COLOR]
[COLOR=red]CPU Multiplier................. - 9[/COLOR]
[COLOR=red]> Memory Timing Setting[/COLOR]
[COLOR=red]> Spread Spectrum Control[/COLOR]
[COLOR=red]CPU Internal Thermal Control... - Disabled[/COLOR]
[COLOR=red]Limit CPIUD MaxVal............. - Disabled[/COLOR]
[COLOR=red]Enhanced C1 (C1E).............. - Enabled[/COLOR]
[COLOR=red]Execute Disable Bit............ - Disabled[/COLOR]
[COLOR=red]Virtualization Technology...... - Disabled[/COLOR]
[COLOR=red]Enhanced Speed Step (tm) tech.. - Disabled[/COLOR]
[COLOR=red]LDT Frequency.................. - 5x[/COLOR]

[B]Memory Timing Setting:[/B]

[COLOR=red]tCL (CAS Latency).............. - 4[/COLOR]
[COLOR=red]tRCD........................... - 4[/COLOR]
[COLOR=red]tRP............................ - 4[/COLOR]
[COLOR=red]tRAS........................... - 8[/COLOR]
[COLOR=red]Command Per Clock (CMD)........ - 1[/COLOR]
[COLOR=red]** Advanced Memory Settings **[/COLOR]
[COLOR=red]tRRD........................... - 5[/COLOR]
[COLOR=red]tRC............................ - 8[/COLOR]
[COLOR=red]tWR............................ - 5[/COLOR]
[COLOR=red]tWTR........................... - 7[/COLOR]
[COLOR=red]tREF........................... - Auto[/COLOR]
[COLOR=red]tRD............................ - Auto[/COLOR]
[COLOR=red]tRFC........................... - 22[/COLOR]
[COLOR=red]Async Latency.................. - Auto[/COLOR]

[B]Over Voltage:[/B]

[COLOR=red]VCore Voltage.................. - 1.53750v[/COLOR]
[COLOR=red]Memory Voltage................. - 2.225v[/COLOR]
[COLOR=red]1.2V HTT Voltage............... - 1.60v[/COLOR]
[COLOR=red]NB Core Voltage................ - 1.55v[/COLOR]
[COLOR=red]SB Core Voltage................ - 1.65v[/COLOR]
[COLOR=red]CPU VTT Voltage................ - 1.50v[/COLOR]
[COLOR=red]DDR Controller Ref Voltage..... - Auto[/COLOR]
[COLOR=red]DDR Channel A Ref Voltage...... - Auto[/COLOR]
[COLOR=red]DDR Channel B Ref Voltage...... - Auto[/COLOR]

 

Orthos (SP2004) + 3dMark2001SE + 3x CPU-Z

 

E66003.jpg

 

3dMark2003:

 

E66003-1.jpg

 

3dMark2005:

 

E66003-2.jpg

 

3dMark2006:

 

E66003-3.jpg

 

short description:

400 x 9 = 3.6GHZ @ 1.53750v

4-4-4-8 1T @ 2.225V DDR800

Share this post


Link to post
Share on other sites

DFI LANPARTY UT ICFX3200-T2R/G, 4/26/07 BETA BIOS

 

A-DATA EXTREME 1000+ 2 x 1GB DDR2-1000 (PC2 8000)

 

Intel Core 2 Duo E6600 Conroe 2.40GHz 4MB L2

 

Sapphire X1900XT-X 512MB GDDR3 PCI-E 16x @ Stock , Catalyst 7.4

 

Samsuns Spinpoint P120s 250GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive

 

Pioneer DVR 111DBK DVD-RW drive

 

Siverstone ST85F 850W Power Supply

 

Custom h2o cooling

 

 

 

==========

 

 

 

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

CPU VID Control................ - 1.46875

CPU VID Special Add............ - Auto

DDR2 RAM 1.8V Voltage.......... - 2.23V

CPU VTT 1.2V Voltage........... - 1.29V

NB Core 1.2V Voltage........... - 1.48V

NB PLL 1.8V Voltage............ - 2.13V

NB PLL 1.2V Voltage............ - 1.38V

NB PCI-E 1.2V Voltage.......... - 1.34V

NB Core 1.2V Convert From...... - 2.14V

SB Core 1.2V Voltage........... - 1.34V

Clockgen Voltage............... - 2.92V

GTL REF Voltage Control........ - Enabled

CPU Core 1/2 GTL REF Volt...... - 48

CPU Core 3/4 GTL REF Volt...... - 48

North Bridge GTL REF Volt...... - 128

CPU PLL Setting Override....... - ENABLE

PLL Override Loop Count........ - Auto

Conroe P-State Multiplier...... - X 8

C1E Function................... - Disable

[/color]



[b]Performance Options:[/b]

[color=red]

Memory Clock Frequency......... - sync

Current Memory Clock........... - 266

Control CPU Frequency.......... - Manual

CPU Frequency(MHz)............. - 438

NB FSB Strapping............... - 333

PCIE Overclock................. - 100

Software Reset Clockgen........ - Enabled

Memory Overclocking............ - Disable

Overclocking Frequency(MHz).... - 266

[/color]



[b]Northbridge Selections:[/b]

[color=red]

Memory Channels................ - Channel A & B

Memory Power Management........ - Disable

IGD Clock Gate................. - Disable

NB Channel Mapping............. - Auto

Simple Addr Translation........ - Disable

Chip-Select Swap............... - Disable

Burst Lenght................... - 4

Bank0 Map GFX.................. - 4

Bank1 Map GFX.................. - 5

Bank2 Map GFX.................. - 6

Channel Mapping NB............. - 5

Channel Mapping GFX............ - 1

Bank0 Map NB................... - 5

Bank1 Map NB................... - 11

Bank2 Map NB................... - 7

[/color]



[b]Memory Timing Menu:[/b]

[color=red]

CS Output Timing............... - Auto

CK Output Timing............... - Auto

Duel Channel Split Mode........ - Auto

Addr/CMD Driving Pre-Amp....... - Disable

Addr/CMD Driving Strength...... - 12

Clocking Driving Pre-Amp....... - Always

Clocking Driving Strength...... - 12 

Address/Command Timing......... - Auto

Memory Timing Select........... - Auto

CAS Timing (TCAS).............. - 4

Read RAS-CAS Delay (TRCDT)..... - 4

Write RAS-CAS Delay (TRCDR).... - 4

RAS Precharge Time TRP......... - 4

Cycle Time (TRAS).............. - 12

Row Cycle Time (TRC)........... - 20

Refresh To Active (TRFC)....... - 36

Bank To Bank CMD (TRRD)........ - 3

Write Recovery (TWR)........... - 5

Read-Write Command (TRTW)...... - 3

Write-Write CS (TRTR_CS)....... - 2

Write -Read Commad (TWTR)...... - 3

Write-Read CS (TWTR_CS)........ - 2

Read-Read CS (TRTR_CS)......... - 2

Read Data Transfer............. - 5

[/color]



[b]Memory Timing Menu:[/b]

[color=red]

Read Data Transfer............. - Enable

Read Strobe Delay.............. - Disable

Read Strobe Arrival............ - Enable

[/color]



[b]FSB IO Strength:[/b]

[color=red]

FSB IO Driving Control......... - Default

1X NMOS Strength............... - N/A

1X PMOS Strength............... - N/A

2X NMOS Strength............... - N/A

2X PMOS Strength............... - N/A

4X NMOS Strength............... - N/A

4X PMOS Strength............... - N/A



[/color]

 

 

 

==========

 

 

primecd5.th.jpg

 

 

3d01sevj5.th.jpg

 

 

3d03kt3.th.jpg

 

 

3d05yi2.th.jpg

 

 

3s06kd4.th.jpg

 

 

short description:

438 x 8 = 3.5Ghz @ 1.46875v

4-4-4-4-12 sync 2T @ 2.23v 876Mhz

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...