Jump to content


Photo
- - - - -

Socket LGA775 Overclocking Database


  • Please log in to reply
115 replies to this topic

#25 Angry_Games

Angry_Games

    Honorary Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 27999 posts

Posted 01 December 2006 - 02:51 PM

DFI 975X/G Infinity, 11/15/2006 BIOS

OCZ 2GB (2 x 1GB) DDR2-800 (ATI CrossFire Certified)

Intel Core 2 Duo E6400 Conroe 2.13GHz 2MB L2

Leadtek Winfast PX7950 GT TDH 256MB 256-bit GDDR3 PCI-E 16x @ 575/725, 84.56mod2 SLI drivers

Seagate Barracuda 7200.10 ST3250820AS 250GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive

NEC 3550A DVD-RW drive

OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply

CORSAIR Nautilus 500 Water Cooling Sytem


*
*


*
*


==========




[b]Genie BIOS[/b]

[color=red]

Over Clock Mode Select.............. - Manual

PPM Function........................ - Enabled



CPU Clock Setting................... - 375Mhz

PCIE Clock Setting.................. - 105MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - + 125.0mV

Default CPU Voltage................. - 1.23750v

CPU VTT Voltage Setting............. - 1.30v

DRAM Voltage Setting................ - 2.20v

NB Chip Voltage Setting............. - 1.70v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 5 

DRAM RAS# to CAS# Delay............. - 5

DRAM RAS# Precharge................. - 5

Precharge Delay (tRAS).............. - 15

System Memory Frequency............. - 533Mhz

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

[/color]


==========



Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE:

http://www.angrygame...cz_ati2gb-1.gif



3dMark2003:

Posted Image



3dMark2005:

Posted Image



3dMark2006:

Posted Image



Aquamark 3d:

Posted Image




Short description:
375x8 @ 3.00Ghz
5-5-5-15
Diablo III arrives at Angry's house:
Posted Image

#26 ncsa

ncsa

    Member

  • Members
  • PipPip
  • 390 posts

Posted 03 December 2006 - 08:42 PM

============

DFI 975X/G Infinity 11/15/06 BIOS

GEIL Ultra (2 x 512MB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) model GX21GB8500UDC CL5-5-5-15

Intel Core 2 Extreme X6800 Conroe 2.92GHz 4M sharing L2

1 WinFast 7900GT TDH Extreme 256MB PCI-E 16x @ 520/715 (stock air) 91.47 WHQL drivers

1 Maxtor DIamond Max 10 200GB 7200 RPM 8MB Cache SATA 1.5Gb/s Hard Drives

Silverstone Zeus ST75ZF 750W Power Supply

Thermaltake Big Water 735 CPU Cooler


*
*

==========


[b]Genie BIOS[/b]

[color=red]



Over Clock Mode Select.............. - Manual

PPM Function........................ - Disabled



CPU Clock Setting................... - 460Mhz

PCIE Clock Sync. With............... - O.C. Mode

PCIE Clock Setting.................. - 110MHz

SATA Clock Sync. With............... - Fix 100Mhz

CPU and PCIE Clock Turbo............ - H/W Turbo

CPU Turbo Add-On Speed.............. - Disabled

PCIE Turbo Add-On Speed............. - Disabled



CPU VID Offset Setting.............. - + 200.0mv

Default CPU Voltage................. - 1.32500v

CPU VTT Voltage Setting............. - 1.35v

DRAM Voltage Setting................ - 2.75v

NB Chip Voltage Setting............. - 1.75v*

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 4

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 12

System Memory Frequency............. - 533 Mhz

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... – 3.0X

Data B Drive Strength............... - 3.0X

x8 Control Drive Strength........... - 3.0X

x16 Control Drive Strength.......... - 3.0X

x8 Clock Drive Strength............. - 3.0X

x16 Clock Drive Strength............ - 3.0X

Command A Drive Strength............ - 3.0X

Command B Drive Strength............ - 3.0X

[/color]


==========


Orthos, 2x CPU-Z, 3dMark2001SE, SandraSoft BW:

Posted Image

3dMark2003:

Posted Image

3dMark2005:

Posted Image

3dMark2006:

Posted Image

Aquamark 3D:

Posted Image

Nuclearus:

Posted Image

Short description:
460x7 @ 3.22 Ghz 1.525 vcore
4-4-4-12 533 divider / 2.65 vdimm
*NB vMOD | actual = 1.87v

#27 red930

red930
  • Guests
  • 0 posts

Posted 10 December 2006 - 01:30 PM

DFI 975X/G Infinity, 11/15/2006 BIOS

350FSB CPU 3.16GHz memory at 525MHz

DFI 975X/G Infinity, 11/15/2006 BIOS

OCZ 2 x 1GB DDR2-1000 (PC2 8000)

Intel Core 2 Duo E6600 Conroe 2.4GHz 4MB L2

ATI X800 256MB PCI-E 16x @ 350/700, Omega 6.9 drivers

Seagate Barracuda 7200.10 ST3320820AS 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive

NEC 3550A DVD-RW drive

OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply



*
*



*
*


==========




[b]Genie BIOS[/b]

[color=red]

Over Clock Mode Select.............. - Manual

PPM Function........................ - Enabled



CPU Clock Setting................... - 350Mhz

PCIE Clock Setting.................. - 105MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - default

Default CPU Voltage................. - 1.23750v

CPU VTT Voltage Setting............. - 1.20v

DRAM Voltage Setting................ - 2.20v

NB Chip Voltage Setting............. - 1.60v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 4

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 8

System Memory Frequency............. - Auto

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

[/color]


==========



Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE:

http://myweb.cableon...c3oczscreen.JPG



3dMark2003:

Posted Image



3dMark2005:

Posted Image



3dMark2006:

Posted Image




Short description:
350x9 @ 3.16Ghz
4-4-4-8

#28 Voltes-5

Voltes-5

    Certified Geek

  • Members
  • PipPipPipPip
  • 1721 posts

Posted 10 December 2006 - 04:03 PM

DFI 975X/G Infinity, 11/15/2006 BIOS

Crucial Ballistix 2 x 1GB DDR2-1000 (PC2 8000)

Intel Core 2 Duo E6600 Conroe 2.40GHz 4MB L2 Cache

XFX 8800GTS 640MB 320-bit GDDR3 PCI-E 16x

WD 740 Raptor

Lite On SOHW 16933

PC P&C 510 ASL

Zalman CNPS 9500 LED


==========




[b]Genie BIOS[/b]

[color=red]

Over Clock Mode Select.............. - Manual

PPM Function........................ - Enabled



CPU Clock Setting................... - 400Mhz

PCIE Clock Setting.................. - 110MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - + 225.0mV

Default CPU Voltage................. - 1.32500v

CPU VTT Voltage Setting............. - 1.30v

DRAM Voltage Setting................ - 2.50v

NB Chip Voltage Setting............. - 1.75v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 5 

DRAM RAS# to CAS# Delay............. - 6

DRAM RAS# Precharge................. - 6

Precharge Delay (tRAS).............. - 15

System Memory Frequency............. - 533Mhz

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - 3.00X

Data B Drive Strength............... - 3.00X

x8 Control Drive Strength........... - 3.00X

x16 Control Drive Strength.......... - 3.00X

x8 Clock Drive Strength............. - 3.00X

x16 Clock Drive Strength............ - 3.00X

Command A Drive Strength............ - 1.50X

Command B Drive Strength............ - 1.50X

[/color]


==========



Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE:

http://i34.photobuck...tes-5/4x9-2.jpg



3dMark2003:

http://i34.photobuck...-5/1024x768.jpg



3dMark2005:

http://i34.photobuck...Voltes-5/05.jpg



3dMark2006:

http://i34.photobuck...ltes-5/06-2.jpg





Short description:
400x9 @ 3.6Ghz
5-6-6-15

#29 Splave

Splave

    Certified Geek

  • Members
  • PipPipPipPip
  • 1270 posts

Posted 15 December 2006 - 08:30 PM

DFI 975X/G Infinity, 11/15/2006 BIOS

OCZ Platinum Revision 2 2 x 1GB DDR2-800 (PC2 6400)

Intel Core 2 Duo E6600 Conroe 2.4GHz 4MB L2

eVGA 8800 GTS 640MB 320-bit GDDR3 PCI-E 16x @ 500/1600, 97.44 ForceWare drivers

Western Digital WD1600YS 160GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive

Samsung SH-S182M/BEBN 18X Dual Layer DVD±RW Drive

Ultra X-Finity 600w ULT31847 ATX12V 600W Power Supply

Scythe Infinity Air Cooling


*
*




*
*


==========




[b]Genie BIOS[/b]

[color=red]

Over Clock Mode Select.............. - Manual

PPM Function........................ - Disabled



CPU Clock Setting................... - 336Mhz

PCIE Clock Setting.................. - 100MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - +000.0mV

Default CPU Voltage................. - 1.23750v

CPU VTT Voltage Setting............. - 1.30v

DRAM Voltage Setting................ - 2.10v

NB Chip Voltage Setting............. - 1.650v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - Auto 

DRAM RAS# to CAS# Delay............. - Auto

DRAM RAS# Precharge................. - Auto

Precharge Delay (tRAS).............. - Auto

System Memory Frequency............. - 533Mhz

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

[/color]


==========



Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE:

Posted Image



3dMark2003:

Posted Image



3dMark2005:

Posted Image



3dMark2006:

Posted Image



Aquamark 3d:

Posted Image




Short description:
335x9 @ 3.0Ghz
5-5-5-15

#30 Thraxz

Thraxz

    Total Nerd

  • Members
  • PipPipPipPipPip
  • 2682 posts

Posted 17 December 2006 - 01:12 PM

DFI 975X/G Infinity, 10/26/2006 BIOS

OCZ Gold (1 x 1GB) DDR2 800MHz (PC2 6400)

Intel Core 2 Duo E6600 (2400Mhz, 1066FSB, 65nm

ATI Radeon X1900XTX 512MB PCI-E 16x Warcat 6.11 drivers


2x300G Seagate Perpendiculars 7200 RPM 16MB Cache

Crap DVD-R drive

OCZ GXE 700w psu

Danger Den TDX CPU Block (S939 + adapter)


==========


Genie BIOS

Over Clock Mode Select.............. - Manual
PPM Function........................ - Disabled

CPU Clock Setting................... - 346Mhz
PCIE Clock Setting.................. - 115MHz
SATA Clock Sync. With............... - Fix 100Mhz

CPU VID Offset Setting.............. - +25.0mV
Default CPU Voltage................. - 1.250v
CPU VTT Voltage Setting............. - 1.30v
DRAM Voltage Setting................ - 2.00v
NB Chip Voltage Setting............. - 1.750v


DRAM Timing and Config

DRAM Timing Selectable.............. - Manual
CAS Latency Time.................... - 5 
DRAM RAS# to CAS# Delay............. - 5
DRAM RAS# Precharge................. - 5
Precharge Delay (tRAS).............. - 15
System Memory Frequency............. - 667Mhz
Refresh Mode Select................. - 15.6
Write to Precharge Delay............ - Auto
Write to Read Delay (Same).......... - Auto
Write to Read Delay (Diff).......... - Auto
Read to Write Delay................. - Auto
Write Recovery...................... - Auto
Read Recovery....................... - Auto
Read Delay.......................... - Auto
Data A Drive Strength............... - x3.00
Data B Drive Strength............... - x3.00
x8 Control Drive Strength........... - x3.00
x16 Control Drive Strength.......... - x3.00
x8 Clock Drive Strength............. - x3.00
x16 Clock Drive Strength............ - x3.00
Command A Drive Strength............ - x3.00
Command B Drive Strength............ - x3.00

[/color]


==========



Prime95, Everest Home Edition 2.20, 2x CPU-Z, 3dMark2001SE:

Posted Image



3dMark2003:

Posted Image



3dMark2005:

Posted Image



3dMark2006:

Posted Image


Short description:
346x9 @ 3.11Ghz
5-5-5-15

#31 Thraxz

Thraxz

    Total Nerd

  • Members
  • PipPipPipPipPip
  • 2682 posts

Posted 28 December 2006 - 03:49 PM

DFI 975X/G Infinity, 11/15/2006 BIOS

OCZ Gold (2 x 1GB) DDR2 1000MHz (PC2 8000)

Intel Core 2 Duo E6600 (2400Mhz, 1066FSB, 65nm

ATI Radeon X1900XTX 512MB PCI-E 16x Warcat 6.11 drivers


2x300G Seagate Perpendiculars 7200 RPM 16MB Cache

Crap DVD-R drive

OCZ GXE 700w psu

Danger Den TDX CPU Block (S939 + adapter)


==========


[color=red]

Genie BIOS



Over Clock Mode Select.............. - Manual

PPM Function........................ - Disabled



CPU Clock Setting................... - 423Mhz

PCIE Clock Setting.................. - 120MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - +267.5mV

Default CPU Voltage................. - 1.250v

CPU VTT Voltage Setting............. - 1.35v

DRAM Voltage Setting................ - 2.20v

NB Chip Voltage Setting............. - 1.750v





DRAM Timing and Config



DRAM Timing Selectable.............. - Auto

CAS Latency Time.................... -  4

DRAM RAS# to CAS# Delay............. - 4

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 12

System Memory Frequency............. - 533

Refresh Mode Select................. - 15.6us

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - X3

Data B Drive Strength............... - X3

x8 Control Drive Strength........... - X3

x16 Control Drive Strength.......... - X3

x8 Clock Drive Strength............. - X3

x16 Clock Drive Strength............ - X3

Command A Drive Strength............ - X3

Command B Drive Strength............ - X3



[/color]


==========



Prime95, Everest Home Edition 2.20, 2x CPU-Z, 3dMark2001SE:

http://weboperative....axz/primec1.JPG

3dMark2003:

Posted Image



3dMark2005:

Posted Image



3dMark2006:

Posted Image


Short description:
423x9 @ 3807MHz
4-4-4-12 @ 846

#32 krose

krose

    Member

  • Members
  • PipPip
  • 71 posts

Posted 04 January 2007 - 04:22 AM

DFI 975X/G Infinity, 12/01/2006 BIOS

Team Group 2x512MB DDR2-667 RAM (3-4-4-8 kit)

Intel Core 2 Duo E6400 Conroe 2.13GHz 2MB L2 L628Bxxx

Gigabyte GV-NX76G256D-RH GeForce 7600GS 256MB 128-bit GDDR2 PCI Express x16 Silent Pipe @ 450/398, 84.21 Forceware

2x WD360GD Raptor Hard Drives RAID 0

Enermax Liberty 620W Power Supply

Thermalright SI-120 CPU Cooler w/LGA 775 Adapter

Thermalright HR-05 Northbridge Cooler

==========




[b]Genie BIOS[/b]

[color=red]

Over Clock Mode Select.............. - Manual

PPM Function........................ - Disabled



CPU Clock Setting................... - 425Mhz

PCIE Clock Setting.................. - 101MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - + 87.5mV

Default CPU Voltage................. - 1.23750v

CPU VTT Voltage Setting............. - 1.20v

DRAM Voltage Setting................ - 2.10v

NB Chip Voltage Setting............. - 1.70v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 4

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 12

System Memory Frequency............. - 533Mhz

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

[/color]


==========


3DMark 2001, 2x Prime, 2x CPU-Z


3DMark 2003


3DMark 2005


3DMark 2006


Short description:
425x8 @ 3.4Ghz
4-4-4-12 @ DDR2 850

#33 RivalNeighbour

RivalNeighbour

    New Member

  • Members
  • 9 posts

Posted 05 January 2007 - 10:43 AM

DFI INFINITY 975X Socket T (LGA 775) Intel 975X ATX Intel Motherboard Bios 2006/12/01

Intel Core 2 Duo E6600 Conroe 2.4GHz 4M sharing L2B-2step6 weekL627CodeA795

Thermalright Ultra-120 CPU Cooling Heatsink with

Antec 75012 120mm 2 Ball Case Cooling Fan

Patriot 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit

2x Western Digital Raptor WD740GD 74GB 10,000 RPM 8MB Cache Serial ATA150 Hard Drive RAID0

eVGA 768-P2-N831-AR GeForce 8800GTX 768MB 384-bit GDDR3 PCI Express x16 HDCP Video Card

Thermaltake toughpower W0103RU ATX12V/ EPS12V 600W Power Supply

Ultra ULT31826 Aluminus Mid Tower Case (Silver) w/120mm exaust fan

Sony DRU-810A Dual Layer DVD±RW Writer

SCEPTRE X20WG-Naga Black 20.1" 5ms (GTG) DVI Widescreen LCD Monitor 300 cd/m2 1000:1 Built in Speakers

*
*
Bios Genie pic 1
Bios Genie pic 2
Bios Genie pic 3

*
*

==========


[b]Genie BIOS[/b]
[color=red]
Over Clock Mode Select.............. - Manual
PPM Function........................ - Disabled

CPU Clock Setting................... - 379Mhz
PCIE Clock Setting.................. - 100MHz
SATA Clock Sync. With............... - Fix 100Mhz

CPU VID Offset Setting.............. - + 225.0mV
Default CPU Voltage................. - 1.32500v
CPU VTT Voltage Setting............. - 1.30v
DRAM Voltage Setting................ - 2.20v
NB Chip Voltage Setting............. - 1.75v
[/color]

[b]DRAM Timing and Config[/b]
[color=red]
DRAM Timing Selectable.............. - Manual
CAS Latency Time.................... - Auto
DRAM RAS# to CAS# Delay............. - Auto
DRAM RAS# Precharge................. - Auto
Precharge Delay (tRAS).............. - Auto
System Memory Frequency............. - 533Mhz
Refresh Mode Select................. - Auto
Write to Precharge Delay............ - Auto
Write to Read Delay (Same).......... - Auto
Write to Read Delay (Diff).......... - Auto
Read to Write Delay................. - Auto
Write Recovery...................... - Auto
Read Recovery....................... - Auto
Read Delay.......................... - Auto
Data A Drive Strength............... - 3.00X
Data B Drive Strength............... - 3.00X
x8 Control Drive Strength........... - 3.00X
x16 Control Drive Strength.......... - 3.00X
x8 Clock Drive Strength............. - 3.00X
x16 Clock Drive Strength............ - 3.00X
Command A Drive Strength............ - 1.50X
Command B Drive Strength............ - 1.50X
[/color]


==========


Everest 3.50.817 Memory Read

Orthos, 2x CPU-Z, 3dMark2001SE:

3dMark2003:
1024x768


3dMark2005:
1024x768



3dMark2006:
1280x1024


Short description:
379x9 @ 3411Mhz
5-5-5-15 2.0v

#34 Angry_Games

Angry_Games

    Honorary Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 27999 posts

Posted 22 January 2007 - 05:03 PM

Gigabyte GA-965P-S3, F8 BIOS

OCZ 2GB (2 x 1GB) DDR2-800 (ATI CrossFire Certified)

Intel Core 2 Duo E6400 Conroe 2.13GHz 2MB L2

XFX 7800GT 256MB 256-bit GDDR3 PCI-E 16x 84.21 drivers

Western Digital Caviar SE WD800JD 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s

Lite-On 16x SATA DVD-RW

Antec True Power Trio TP3-650 ATX12V 650W Power Supply

CORSAIR Nautilus 500 Water Cooling Sytem


*
*

Posted Image

Posted Image


*
*


==========




[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=green]

Robust Graphics Booster............. - Auto

CPU Clock Ratio..................... - 8x

CPU Host Clock Control.............. - Enabled

CPU Host Frequency (Mhz)............ - 400

PCI Express Frequency (Mhz)......... - 105MHz

C.I.A.2............................. - Disabled

System Memory Multiplier (SPD)...... - 2.50

Memory Frequency (Mhz).............. - 1000

High Speed DRAM DLL Settings........ - Option 1



DRAM Timing Selectable (SPD)........ - Manual

CAS Latency Time.................... - 5 

DRAM RAS# to CAS# Delay............. - 5

DRAM RAS# Precharge................. - 5

Precharge Delay (tRAS).............. - 16

ACT to ACT Delay (tRRD)............. - 6

Bank Write to READ Delay............ - Auto

Write to Precharch Delay............ - Auto

Refresh to ACT Delay................ - 0 (Auto)

Read to Precharge Delay............. - Auto

Memory Performance Enhance.......... - Normal



System Voltage Control.............. - Manual

DDR2 OverVoltage Control............ - +0.3v

PCI-E OverVoltage Control........... - Normal

FSB OverVoltage Control............. - +0.3v

(G)MCH OverVoltage Control.......... - +0.2v

CPU Voltage Control................. - Normal

Normal CPU Vcore.................... - 1.23750v

[/color]


==========



Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE:

http://www.angrygame...ps3_400x8-1.gif



3dMark2003:

Posted Image



3dMark2005:

Posted Image



3dMark2006:

Posted Image



Aquamark 3d:

Posted Image




Short description:
400x8 @ 3.20Ghz, stock voltage
5-5-5-15
Diablo III arrives at Angry's house:
Posted Image

#35 Splave

Splave

    Certified Geek

  • Members
  • PipPipPipPip
  • 1270 posts

Posted 22 January 2007 - 06:08 PM

EVGA 122-CK-NF68-AR SLI, F8 BIOS

OCZ 2GB (2 x 1GB) DDR2-800 Platinum Rev 2

Intel Core 2 Duo E6600 Conroe 2.13GHz 2MB L2

eVGA 7950GT 512MB 256-bit GDDR3 PCI-E 16x 84.21 drivers

Western Digital Caviar SE WD800JD 160GB 7200 RPM 8MB Cache SATA 3.0Gb/s

SAMSUNG 18x IDE DVD-RW

OCZ GameXstream ATX12V 600W Power Supply

Scythe Infinity Cooling


*
*

Posted Image

Posted Image

Posted Image

Posted Image

*
*


==========


[b]FSB & Memory Config[/b]

CPU Freq, Mhz....................... - 3600.0

CPU Multiplier...................... - 8x

FSB - Memory Clock Mode............. - Unlinked

FSB - Memory Ratio ................. - Auto

FSB - QDR (Mhz)..................... - 1800

MEM (DDR), Mhz...................... - 900



[b]Memory Timing Setting[/b]

Memopry Timing Setting.............. - Expert

tCL (CAS Latency)................... - 5 

tRCD................................ - 5

tRP................................. - 5

tRAS................................ - 15

Command Per Clock (CMD)............. - 2T



tRRD................................ - Auto (5)

tRC................................. - Auto (25)

tWR................................. - Auto (6)

tWTR................................ - Auto (10)

tREF................................ - Auto (7.8uS)



[b]System Clocks[/b]

CPU Multiplier...................... - 8x

PCIe x16_1 (Mhz).................... - 125MHz

PCIe x16_3 (Mhz).................... - Auto

PCIe x16_2 (Mhz).................... - Auto

PCIe x16_1 (Mhz).................... - Auto

nForce SPP --> nForce MCP........... - 5

nForce SPP <-- nForce MCP........... - 5



[b]System Voltages[/b]

CPU Core............................ - 1.45000v

CPU FSB............................. - 1.4v

Memory.............................. - 2.100v

nForce SPP.......................... - 1.40v

nForce MCP.......................... - 1.500v

HT nForce SPP <-> MCP............... - 1.45v


==========



Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE:

Posted Image



3dMark2003:

http://www.imagehost...325_03.JPG.html



3dMark2005:

http://www.imagehost...323_05.JPG.html



3dMark2006:

http://www.imagehost...322_06.JPG.html



Aquamark 3d:

http://www.imagehost.../143321_aq3.JPG


Short description:
450x8 @ 3.6Ghz
5-5-5-15

#36 ncsa

ncsa

    Member

  • Members
  • PipPip
  • 390 posts

Posted 24 January 2007 - 06:00 AM

DFI 975X/G Infinity 11/15/06 BIOS

GEIL Ultra (2 x 512MB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) model GX21GB8500UDC CL5-5-5-15

Intel Core 2 Extreme X6800 Conroe 2.92GHz 4M sharing L2

XFX 7950GX2-570 512MB PCI-E 16x @ 735/811 (H20 Cooling) 91.47 WHQL drivers

Single Maxtor DIamond Max 10 200GB 7200 RPM 8MB Cache SATA 1.5Gb/s Hard Drive

Silverstone Zeus ST75ZF 750W Power Supply

VapoChill LS [AC]




PPM Function........................ - Disabled



CPU Clock Ratio Setting............. - 9 X

CPU Clock Setting................... - 455Mhz

PCIE Clock Setting.................. - 110MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - + 400mv

Default CPU Voltage................. - 1.32500v

CPU VTT Voltage Setting............. - 1.35v

DRAM Voltage Setting................ - 2.55v*

NB Chip Voltage Setting............. - 1.75v*



Auto Detect PCI Clk................. - Enabled

Spread Spectrum..................... - Disabled



DRAM Timing and Config



DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 4

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 12

System Memory Frequency............. - 533 Mhz

Refresh Mode Select................. - Auto

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... – Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

DRAM Data Integrity Mode............ - Non-ECC


==========


Orthos, 2x CPU-Z, 3dMark2001SE:
Posted Image

3dMark2003:
Posted Image

3dMark2005:
Posted Image

3dMark2006:
Posted Image

Aquamark 3D:
Posted Image


Short description:
455x9 @ 4.1 Ghz 1.725 vcore | actual = 1.67v
4-4-4-12 533 divider / 2.55 vdimm | actual = 2.68v *VDimm vMOD
*NB vMOD | actual = 1.87v