Jump to content
Angry_Games

Socket LGA775 Overclocking Database

Recommended Posts

DFI LP UT P35-T2R (LP 35DB07 BIOS)

 

Intel E6600 (L714A245)

 

2x1024 Crucial Ballistix 8500

 

X1900 [email protected]/797, CAT 6.6 DRIVERS

 

2X36GB Western Digital Raptor 10,000RPM SATA hdd RAID 0

 

LITEON 832S DVD R/W

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
Genie BIOS Setting:

Exit Setup shutdown....................... - Mode 2
CLOCK VCO divider......................... - Auto
CPU Clock Ratio........................... - 8 X
- Target CPU Clock........................ - 4240 MHz
CPU Clock................................. - 530 MHz
Boot Up Clock............................. - Auto
DRAM Speed................................ - 333/667
- Target DRAM Speed....................... - DDR2 1061
PCIE Clock................................ - 105 MHz
PCIE Slot Config.......................... - 1X 1X

CPU Spread Spectrum....................... - Disabled
PCIE Spread Spectrum...................... - Disabled
SATA Spread Spectrum...................... - Disabled


CPU Feature:

Thermal Management Control................ - Disabled
PPM(EIST) Mode............................ - Disabled
Limit CPUID MaxVal........................ - Disabled
C1E Function.............................. - Disabled
Execute Disable Bit....................... - Disabled
Virtualization Technology................. - Disabled
Core Multi-Processing..................... - Enabled


Voltage Setting:

CPU VID Control........................... - 1.6V
CPU VID Special Add....................... - 101.65%
DRAM Voltage Control...................... - 2.23V
SB 1.05V Voltage.......................... - 1.15V
SB Core/CPU PLL Voltage................... - 1.55V
NB Core Voltage........................... - 1.61V
CPU VTT Voltage........................... - 1.58V
Vcore Droop Control....................... - Disabled
Clockgen Voltage Control.................. - 3.45V
GTL+ Buffers Strenght..................... - Strong
Host Slew Rate............................ - Weak
GTL REF Voltage Control................... - Enabled
CPU GTL 1/3  REF Volt..................... - 110
CPU GTL 0/2  REF Volt..................... - 110
North Bridge GTL REF Volt................. - 110


DRAM Timing:

Enhance Data transmitting................. - Fast
Enhance Addressing........................ - Fast
T2 Dispatch............................... - Auto

CAS Latency Time (tCL).................... - 4
RAS# to CAS# Delay (tRCD)................. - 4
RAS# Precharge (tRP)...................... - 4
Precharge delay (tRAS).................... - 12
All Precharge to ACT...................... - AUTO
REF to ACT Delay (tRFC)................... - 24
Preformance LVL (Read delay).............. - AUTO

MCH ODT Latencey.......................... - AUTO
Write to PRE Delay (tWR).................. - AUTO
Rank Write to Read (tWTR)................. - AUTO
ACT to ACT Delay (tRRD)................... - AUTO
Read to Write Delay (tRDWR)............... - AUTO
Ranks Write to Write (tWRWR).............. - AUTO
Ranks Read to Read (tRDRD)................ - AUTO
Ranks Write to Read (tWRRD)............... - AUTO
Read CAS# Precharge (tRTP)................ - AUTO
All PRE to Refresh........................ - AUTO


Clock Setting Fine Delay:

Ch1 Clock Crossing Setting................ - More Aggressive
DIMM 1 Clock fine delay................... - Current[14]
DIMM 2 Clock fine delay................... - Current[ 6]
Ch1 Command fine delay.................... - Current[10]
Ch1 Control fine delay.................... - Current[ 5]

Ch2 Clock Crossing Setting................ - More Aggressive
DIMM 3 Clock fine delay................... - Current[13]
DIMM 4 Clock fine delay................... - Current[ 5]
Ch2 Command fine delay.................... - Current[10]
Ch2 Control fine delay.................... - Current[ 4]

Ch1Ch2 CommonClock Setting................ - More Aggressive

Ch1 RDCAS GNT-Chip Delay.................. - Auto
Ch1 WRCAS GNT-Chip Delay.................. - Auto
Ch1 Command to CS Delay................... - Auto

Ch2 RDCAS GNT-Chip Delay.................. - Auto
Ch2 WRCAS GNT-Chip Delay.................. - Auto
Ch2 Command to CS Delay................... - Auto


Read delay phase adjust:

Channel 1 Phase 0 Pull-In................. - Auto
Channel 1 Phase 1 Pull-In................. - Auto
Channel 1 Phase 2 Pull-In................. - Auto
Channel 1 Phase 3 Pull-In................. - Auto
Channel 1 Phase 4 Pull-In................. - Auto

Channel 2 Phase 0 Pull-In................. - Auto
Channel 2 Phase 1 Pull-In................. - Auto
Channel 2 Phase 2 Pull-In................. - Auto
Channel 2 Phase 3 Pull-In................. - Auto
Channel 2 Phase 4 Pull-In................. - Auto
[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE:

 

normal_4240-Orthos.JPG

 

 

3dMark2003:

 

normal_4240-3D03.JPG

 

 

3dMark2005:

 

normal_4240-3D05.JPG

 

 

 

3dMark 2006:

 

normal_4240-3D06.JPG

 

 

 

==========

 

 

 

short description:

530x8 @ 4240Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Gigabyte GA-X38-DQ6, F6 BIOS

 

Crucial 4GB (4 x 1GB) DDR2 800 PC-6400

 

Intel Core 2 Duo E2160 Conroe 1.8GHz 1MB L2

 

Saphire HD 3870 512Mb 256 bit 777/1126 8.451 drivers

 

3x Hitatchi Deskstar 160Gb Sata 2 8Mb cache - raid 0-

 

LG 16x IDE DVD Writer

 

Enermax Liberty 620W Power Supply

 

 

Tuniq Tower

 

*

*

 

 

 

 

==========

 

 



[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=green]

Robust Graphics Booster............. - turbo	

CPU Clock Ratio..................... - 9x

CPU Host Clock Control.............. - Enabled	

CPU Host Frequency (Mhz)............ - 356

PCI Express Frequency (Mhz)......... - 100MHz

C.I.A.2............................. - Disabled

System Memory Multiplier (SPD)...... - Manual

Memory Frequency (Mhz).............. - 1068



DRAM Timing Selectable (SPD)........ - Manual

CAS Latency Time.................... - 5

DRAM RAS# to CAS# Delay............. - 5

DRAM RAS# Precharge................. - 5

Precharge Delay (tRAS).............. - 15

ACT to ACT Delay (tRRD)............. - Auto

Bank Write to READ Delay............ - Auto

Write to Precharch Delay............ - Auto

Refresh to ACT Delay................ - 42

Read to Precharge Delay............. - Auto

Memory Performance Enhance.......... - Normal

Command to #CS Delay___________ 2T



System Voltage Control.............. - Manual

DDR2 OverVoltage Control............ - 0.40V

PCI-E OverVoltage Control........... - Normal

FSB OverVoltage Control............. - 0.15V

(G)MCH OverVoltage Control.......... - 0.10V

CPU Voltage Control................. - 1.575

Normal CPU Vcore.................... - 1.325v

[/color]

 

 

==========

 

 

 

3D Mark01 + Orthos + CpuZ

 

ss1ef8.th.jpg

 

 

 

 

3D Mark03 + Everest read

 

3dmark03hy4.th.jpg

 

 

3D Mark05 + Vista experiance

 

3dmark05hv9.th.jpg

 

3D Mark06 + Superpi 1M

 

3dmark06vz8.th.jpg

 

 

 

 

 

 

Short description:

356x9 @ 3.2Ghz

DDR2 1068 5-5-5-15

Share this post


Link to post
Share on other sites

DFI LP UT P35-T2R (01/09/2008 Beta BIOS)

 

Intel E8500 (Q740A493T)

 

2x1024 Crucial Ballistix 8500

 

8800 Ultra @ 710/1140, 169.21 Drivers

 

2X36GB Western Digital Raptor 10,000RPM SATA hdd RAID 0

 

LITEON 832S DVD R/W

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

Genie BIOS Setting:



Exit Setup shutdown....................... - Mode 2

CLOCK VCO divider......................... - Auto

CPU Clock Ratio........................... - 9.5 X

CPU-N2 Ratio.............................. - Enabled

- Target CPU Clock........................ - 4607 MHz

CPU Clock................................. - 485 MHz

Boot Up Clock............................. - Auto

DRAM Speed................................ - 333/667

- Target DRAM Speed....................... - DDR2 971

PCIE Clock................................ - 100 MHz

PCIE Slot Config.......................... - 1X 1X



CPU Spread Spectrum....................... - Disabled

PCIE Spread Spectrum...................... - Disabled

SATA Spread Spectrum...................... - Disabled





CPU Feature:



Thermal Management Control................ - Disabled

PPM(EIST) Mode............................ - Enabled

Limit CPUID MaxVal........................ - Disabled

C1E Function.............................. - Disabled

Execute Disable Bit....................... - Disabled

Virtualization Technology................. - Disabled

Core Multi-Processing..................... - Enabled





Voltage Setting:



CPU VID Control........................... - 1.43570V

CPU VID Special Add....................... - 101.88%

DRAM Voltage Control...................... - 2.19V

SB 1.05V Voltage.......................... - 1.15V

SB Core/CPU PLL Voltage................... - 1.55V

NB Core Voltage........................... - 1.41V

CPU VTT Voltage........................... - 1.10V

Vcore Droop Control....................... - Disabled

Clockgen Voltage Control.................. - 3.45V

GTL+ Buffers Strenght..................... - Strong

Host Slew Rate............................ - Weak

GTL REF Voltage Control................... - Enabled

CPU GTL 1/3  REF Volt..................... - 65

CPU GTL 0/2  REF Volt..................... - 65

North Bridge GTL REF Volt................. - 65





DRAM Timing:



Enhance Data transmitting................. - Fast

Enhance Addressing........................ - Fast

T2 Dispatch............................... - Auto



CAS Latency Time (tCL).................... - 4

RAS# to CAS# Delay (tRCD)................. - 4

RAS# Precharge (tRP)...................... - 4

Precharge delay (tRAS).................... - 12

All Precharge to ACT...................... - AUTO

REF to ACT Delay (tRFC)................... - 24

Preformance LVL (Read delay).............. - AUTO



MCH ODT Latencey.......................... - AUTO

Write to PRE Delay (tWR).................. - AUTO

Rank Write to Read (tWTR)................. - AUTO

ACT to ACT Delay (tRRD)................... - AUTO

Read to Write Delay (tRDWR)............... - AUTO

Ranks Write to Write (tWRWR).............. - AUTO

Ranks Read to Read (tRDRD)................ - AUTO

Ranks Write to Read (tWRRD)............... - AUTO

Read CAS# Precharge (tRTP)................ - AUTO

All PRE to Refresh........................ - AUTO





Clock Setting Fine Delay:



Ch1 Clock Crossing Setting................ - More Aggressive

DIMM 1 Clock fine delay................... - Current[1486]

DIMM 2 Clock fine delay................... - Current[ 612]

Ch1 Command fine delay.................... - Current[1012]

Ch1 Control fine delay.................... - Current[ 562]



Ch2 Clock Crossing Setting................ - More Aggressive

DIMM 3 Clock fine delay................... - Current[1337]

DIMM 4 Clock fine delay................... - Current[ 524]

Ch2 Command fine delay.................... - Current[1086]

Ch2 Control fine delay.................... - Current[ 449]



Ch1Ch2 CommonClock Setting................ - More Aggressive



Ch1 RDCAS GNT-Chip Delay.................. - Auto

Ch1 WRCAS GNT-Chip Delay.................. - Auto

Ch1 Command to CS Delay................... - Auto



Ch2 RDCAS GNT-Chip Delay.................. - Auto

Ch2 WRCAS GNT-Chip Delay.................. - Auto

Ch2 Command to CS Delay................... - Auto





Read delay phase adjust:



Channel 1 Phase 0 Pull-In................. - Auto

Channel 1 Phase 1 Pull-In................. - Auto

Channel 1 Phase 2 Pull-In................. - Auto

Channel 1 Phase 3 Pull-In................. - Auto

Channel 1 Phase 4 Pull-In................. - Auto



Channel 2 Phase 0 Pull-In................. - Auto

Channel 2 Phase 1 Pull-In................. - Auto

Channel 2 Phase 2 Pull-In................. - Auto

Channel 2 Phase 3 Pull-In................. - Auto

Channel 2 Phase 4 Pull-In................. - Auto

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE:

 

normal_4_6-Orthos-stable.JPG

 

 

3dMark2003:

 

normal_4_6-3d03.JPG

 

 

3dMark2005:

 

normal_4_6-3d05.JPG

 

 

 

3dMark 2006:

 

normal_4_6-3d06.JPG

 

 

 

==========

 

 

 

short description:

485x9.5 @ 4607Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Abit IP35 Pro, V.10 BIOS

OCZ DDR2 PC2-6400 Platnum Revistion 2 2GB (2 x 1GB) DDR2-800 (ATI CrossFire Certified)

Intel Core 2 Duo E6750 Conroe 2.66GHz 4MB L2

ATI X1900XT @ 621/720

2 Seagate Barracuda 7200.10 120GB 7200 RPM 8MB Cache SATA 1.5Gb/s Hard Drive RAID0

Lite-on 20x DVD-RW drive

Hyper Type-R 580w

Zalman 9700LED

 

 

 

 

==========

 

 



[color=blue][b][size=4]µGuru Utility[/color][/b][/size]

[color=green]

CPU Operating Speed  2666 (333)

External Clock...................... - 400MHz

Multiplier Factor................... - X8

Esrimate New CPU Clock.............. - 3200MHz

Dram Speed (cpu : Dram) Default..... - (DDR2 - 800)

Pci Express Clock................... - 100MHz



[color=blue][b][size=4]Voltage Control[/color][/b][/size]



CPU Core Voltage.................... - 1.3500v

DDR2 Voltage........................ - 2.100v

CPU VTT 1.2v Voltage................ - 1.20v

MCH 1.25v Voltage................... - 1.25v

ICH 1.05v Voltage................... - 1.05v

ICHIO 1.5v Voltage.................. - 1.50v

DDR2 Reference Voltage.............. - 0%

CPU GTLREF 0&2...................... - 67%

CPU GTLREF 1&3...................... - 67%



[color=blue][b][size=4]Advanced Chipset Features[/color][/b][/size]



Cas Latency Time (tcL).............. - 4

Ras# to Cas# Delay (trcD)........... - 4

Ras# Precharge (tRP)................ - 4

Precharge Delay (tRAS).............. - 15

Refrech Cycle Time (tRFC)........... - auto

Write Recovery Time (twR)........... - auto

Write to Read Delay (tWTR).......... - auto

Act To Act Time (tRRD).............. - auto

Read ro Prechange (tRTP)............ - auto

Command Rate........................ - 2T

PCIe Complincy Mode................. - v1.0a

Reg Force X1........................ - Disabled

Init Display First.................. - PCIe X



[/color]

 

==========

 

 

Prime95+2xCPUZ+3DMarks01

32000mhz3dmark01bc5.th.jpg

 

3DMarks03

32000mhz3dmark03og7.th.jpg

 

3Dmarks05

32000mhz3dmarkd05hb8.th.jpg

 

3DMarks06

32000mhz3dmarkd06yo6.th.jpg

 

 

 

 

 

 

Short description:

400x8 @ 3.20Ghz

[email protected]

Share this post


Link to post
Share on other sites

Gigabyte GA-X38-DS4 (F2 01/02/08 bios)

G.Skill F2-6400PHU1-1GBHZ 4X1gb

Intel Core 2 Duo E8400 Wolfdale

EVGA e-GeForce 8800 GTS 640MB @ 600/1402/900

WD Raptor 74X2 Raid0

WD SATA 250gb

LiteOn DVD Opticals

Corsair TX750W

Swiftech Apex Ultra H20-220

 

[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=green]

Robust Graphics Booster............. - Turbo

CPU Clock Ratio..................... - 9x

CPU Host Clock Control.............. - Enable

CPU Host Frequency (Mhz)............ - 445

PCIe Frequency (Mhz)................ - Auto

Performance Mode.................... - Turbo

C.I.A.2............................. - Disabled

System Memory Multiplier (SPD)...... - 2.0d

Memory Frequency (Mhz).............. - 950





DRAM Timing Selectable (SPD)........ - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 4

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 12

ACT to ACT Delay (tRRD)............. - 6

Bank Write to READ Delay............ - 8

Write to Precharch Delay............ - 8

Refresh to ACT Delay................ - 40

Read to Precharge Delay............. - 6

Static tRead Value.................. - Auto

Static tRead Phase Adjustment....... - Auto



Clock & Skew Controls............... - all at defaults



System Voltage Control.............. - Manual

DDR2 OverVoltage Control............ - +0.25

PCI-E OverVoltage Control........... - +0.30

FSB OverVoltage Control............. - Normal

(G)MCH OverVoltage Control.......... - +0.100

MCH Reference Voltage Control....... - Normal

DDR Reference Voltage Control....... - Normal

DDR Termination Voltage Control..... - Normal

GTL Ref1 Voltage Ratio.............. - Normal

GTL Ref2 Voltage Ratio.............. - Normal

Loadline Calibration................ - Enable

CPU Voltage Control................. - 1.3000V

Normal CPU Vcore.................... - 1.2200V

[/color]

 

 

==========

3DMark01SE + Orthos + CpuZ

 

Orthos_CPUz_3DMark01.jpg

 

3DMark2003:

 

3DMark03.jpg

 

3DMark2005:

 

3DMark05.jpg

 

3DMark2006:

 

3DMark06.jpg

 

AquaMark

 

AquaMark3.jpg

 

Short description:

445x9 @ 4.0GHz

4-4-4-12

Share this post


Link to post
Share on other sites

Gigabyte GA-X38-DS4 (F2 01/02/08 bios)

G.Skill F2-6400PHU1-1GBHZ 4X1gb

Intel Core 2 Duo E8400 Wolfdale

EVGA e-GeForce 8800 GTS 640MB @ 600/1402/900

WD Raptor 74X2 Raid0

WD SATA 250gb

LiteOn DVD Opticals

Corsair TX750W

Swiftech Apex Ultra H20-220

 

[b]MB Intelligent Tweaker (M.I.T.)[/b]
[color=green]
Robust Graphics Booster............. - Turbo
CPU Clock Ratio..................... - 9x
CPU Host Clock Control.............. - Enable
CPU Host Frequency (Mhz)............ - 445
PCIe Frequency (Mhz)................ - Auto
Performance Mode.................... - Turbo
C.I.A.2............................. - Disabled
System Memory Multiplier (SPD)...... - 2.0d
Memory Frequency (Mhz).............. - 950


DRAM Timing Selectable (SPD)........ - Manual
CAS Latency Time.................... - 4 
DRAM RAS# to CAS# Delay............. - 4
DRAM RAS# Precharge................. - 4
Precharge Delay (tRAS).............. - 12
ACT to ACT Delay (tRRD)............. - 6
Bank Write to READ Delay............ - 8
Write to Precharch Delay............ - 8
Refresh to ACT Delay................ - 40
Read to Precharge Delay............. - 6
Static tRead Value.................. - Auto
Static tRead Phase Adjustment....... - Auto

Clock & Skew Controls............... - all at defaults

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - +0.25
PCI-E OverVoltage Control........... - +0.30
FSB OverVoltage Control............. - Normal
(G)MCH OverVoltage Control.......... - +0.100
MCH Reference Voltage Control....... - Normal
DDR Reference Voltage Control....... - Normal
DDR Termination Voltage Control..... - Normal
GTL Ref1 Voltage Ratio.............. - Normal
GTL Ref2 Voltage Ratio.............. - Normal
Loadline Calibration................ - Enable
CPU Voltage Control................. - 1.3000V
Normal CPU Vcore.................... - 1.2200V
[/color]

 

 

==========

3DMark01SE + Orthos + CpuZ

 

Orthos_CPUz_3DMark01.jpg

 

3DMark2003:

 

3DMark03.jpg

 

3DMark2005:

 

3DMark05.jpg

 

3DMark2006:

 

3DMark06.jpg

 

AquaMark

 

AquaMark3.jpg

 

Short description:

445x9 @ 4.0GHz

4-4-4-12

Share this post


Link to post
Share on other sites

EVGA 132-CK-NF78-A1 NVidia 780i SLI, P03 BIOS

 

Mushkin 2x2GB DDR2-1066 XP2-8500 (996562) (OoP)

 

Intel Core 2 Extreme QX6850 3GHz 8MB L2

 

eVGA 8800Ultra Superclocked 768MB 384-Bit GDDR3 PCI-E 16x

([email protected] Core/1665MHz Shader/1125Mhz Mem) 171.16 drivers

 

Western Digital Caviar SE WD3200YS 320GB 7200 RPM 8MB Cache SATA 3.0Gb/s &

Western Digital Caviar SE WD5000AAKS 500GB 7200RPM 8MB Cache SATA 3.0 Gb/s

 

HP dvd1040 External DVD+/-RW Drive

 

Ultra X3 1600 Watt Modular Power Supply (+12V ~ 117A)

 

DangerDen TDX775+Black Ice XtremeIII+Laing D5 Pump Cooling w/MCT-40 Coolant

 

 

 

==========

 

 

[b]FSB & Memory Config[/b]

CPU Freq, Mhz....................... - 3800.0

CPU Multiplier...................... - 9x

FSB - Memory Clock Mode............. - Linked

FSB - Memory Ratio ................. - Sync Mode

FSB - QDR (Mhz)..................... - 1689

MEM (DDR), Mhz...................... - 844.5



[b]Memory Timing Setting[/b]

Memopry Timing Setting.............. - Expert

tCL (CAS Latency)................... - 4 

tRCD................................ - 4

tRP................................. - 4

tRAS................................ - 12

Command Per Clock (CMD)............. - 2T



tRRD................................ - Auto (4)

tRC................................. - Auto (26)

tWR................................. - Auto (6)

tWTR................................ - Auto (9-10) (Varies between boots)

tREF................................ - Auto (7.8uS)



[b]System Clocks[/b]

CPU Multiplier...................... - 9x

PCIe x16_3 (Mhz).................... - Auto

PCIe x16_2 (Mhz).................... - Auto

PCIe x16_1 (Mhz).................... - Auto

nForce SPP --> nForce MCP........... - 5

nForce SPP <-- nForce MCP........... - 5



[b]System Voltages[/b]

CPU Core............................ - 1.4875v

CPU FSB............................. - 1.5v

Memory.............................. - 2.200v

nForce SPP.......................... - 1.45v

nForce MCP.......................... - 1.550v

HT nForce SPP <-> MCP............... - 1.35v

 

 

==========

 

 

 

Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE (65946):

 

th_22216_3DMark01SE-65946-Prime95-15hours-Everest-CPUz_122_232lo.jpg

 

3dMark2003: 47,423

 

th_22214_3DMark03-47423-CPUz_122_142lo.jpg

 

 

3dMark2005: 21,824

 

th_22211_3DMark05-21824_122_509lo.jpg

 

3dMark2006: 15,704

 

th_22209_3DMark06-15704_122_452lo.jpg

 

Aquamark3: 195796

 

th_22208_AM3-195796_122_412lo.jpg

 

 

 

 

Short description:

422.25x9 @ 3.8Ghz

4-4-4-12-2T

Share this post


Link to post
Share on other sites

DFI 975X/G Infinity, 2/27/2007 BIOS

 

OCZ2P8002GK (2x1GB PC-6400 4-5-4-15)

 

Intel Core 2 Quad Q6600 Revision G0

 

BFG 6600GT OC

 

1x WD 80GB IDE (OS) 1xSeagate 80GB SATA (Apps)

 

1x Seagate 400GB SATA (Samples) 1x Seagate 400GB SATA (Audio)

 

Presonus FP-10 Firewire Audio Interface

 

Samsung SE-S204 External DVD-RW drive

 

PC Power & Cooling Silencer 610W

 

 

*

*

 

 

*

*

 

 

==========

 

 



[b]Genie BIOS[/b]

[color=red]

Over Clock Mode Select.............. - Manual

PPM Function........................ - Disabled



CPU Clock Setting................... - 333Mhz

PCIE Clock Setting.................. - 100MHz

SATA Clock Sync. With............... - Fix 100Mhz



CPU VID Offset Setting.............. - Default

Default CPU Voltage................. - 1.28750v

CPU VTT Voltage Setting............. - 1.20v

DRAM Voltage Setting................ - 2.10v

NB Chip Voltage Setting............. - 1.60v

[/color]



[b]DRAM Timing and Config[/b]

[color=red]

DRAM Timing Selectable.............. - Manual

CAS Latency Time.................... - 4 

DRAM RAS# to CAS# Delay............. - 5

DRAM RAS# Precharge................. - 4

Precharge Delay (tRAS).............. - 15

System Memory Frequency............. - 667Mhz

Refresh Mode Select................. - 7.8

Write to Precharge Delay............ - Auto

Write to Read Delay (Same).......... - Auto

Write to Read Delay (Diff).......... - Auto

Read to Write Delay................. - Auto

Write Recovery...................... - Auto

Read Recovery....................... - Auto

Read Delay.......................... - Auto

Data A Drive Strength............... - Auto

Data B Drive Strength............... - Auto

x8 Control Drive Strength........... - Auto

x16 Control Drive Strength.......... - Auto

x8 Clock Drive Strength............. - Auto

x16 Clock Drive Strength............ - Auto

Command A Drive Strength............ - Auto

Command B Drive Strength............ - Auto

[/color]

 

 

==========

 

Multi-thread Prime95, 2x CPU-Z, 3dMark2001SE:

 

http://img.photobucket.com/albums/v356/djr...Screenshot1.jpg

 

3dMark2003:

 

http://img.photobucket.com/albums/v356/djr...Screenshot2.jpg

 

3dMark2005:

 

http://img.photobucket.com/albums/v356/djr...Screenshot3.jpg

 

3dMark2006:

 

http://img.photobucket.com/albums/v356/djr...Screenshot4.jpg

 

Aquamark 3d:

 

http://img.photobucket.com/albums/v356/djr...Screenshot5.jpg

 

Short description:

333x9 @ 3.01Ghz

4-5-4-15

Share this post


Link to post
Share on other sites

DFI LP UT P35-T2R (01/09/2008 Beta BIOS)

 

Intel E8500 (Q740A493T)

 

2x1024 OCZ PC9600 FLEX (OCZ2FX12001G)

 

8800 Ultra @ 710/1140, 169.21 Drivers

 

2X36GB Raptor RAID 0 / 250GB Caviar

 

LITEON 832S DVD R/W

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

Genie BIOS Setting:



Exit Setup shutdown....................... - Mode 2

CLOCK VCO divider......................... - Auto

CPU Clock Ratio........................... - 9.0 X

CPU-N2 Ratio.............................. - Disabled

- Target CPU Clock........................ - 4610 MHz

CPU Clock................................. - 512 MHz

Boot Up Clock............................. - Auto

DRAM Speed................................ - 333/800

- Target DRAM Speed....................... - DDR2 1230

PCIE Clock................................ - 100 MHz

PCIE Slot Config.......................... - 1X 1X



CPU Spread Spectrum....................... - Disabled

PCIE Spread Spectrum...................... - Disabled

SATA Spread Spectrum...................... - Disabled





CPU Feature:



Thermal Management Control................ - Enabled

PPM(EIST) Mode............................ - Enabled

Limit CPUID MaxVal........................ - Disabled

C1E Function.............................. - Auto

Execute Disable Bit....................... - Enabled

Virtualization Technology................. - Disabled

Core Multi-Processing..................... - Enabled





Voltage Setting:



CPU VID Control........................... - Auto

CPU VID Special Add....................... - 127.87%

DRAM Voltage Control...................... - 2.23V

SB 1.05V Voltage.......................... - 1.15V

SB Core/CPU PLL Voltage................... - 1.55V

NB Core Voltage........................... - 1.53V

CPU VTT Voltage........................... - 1.17V

Vcore Droop Control....................... - Enabled

Clockgen Voltage Control.................. - 3.45V

GTL+ Buffers Strenght..................... - Strong

Host Slew Rate............................ - Weak

GTL REF Voltage Control................... - Enabled

CPU GTL 1/3  REF Volt..................... - 68

CPU GTL 0/2  REF Volt..................... - 67

North Bridge GTL REF Volt................. - 69





DRAM Timing:



Enhance Data transmitting................. - Fast

Enhance Addressing........................ - Fast

T2 Dispatch............................... - Auto



CAS Latency Time (tCL).................... - 5

RAS# to CAS# Delay (tRCD)................. - 5

RAS# Precharge (tRP)...................... - 5

Precharge delay (tRAS).................... - 15

All Precharge to ACT...................... - 5

REF to ACT Delay (tRFC)................... - 35

Preformance LVL (Read delay).............. - 8



MCH ODT Latencey.......................... - AUTO

Write to PRE Delay (tWR).................. - 13

Rank Write to Read (tWTR)................. - 11

ACT to ACT Delay (tRRD)................... - 3

Read to Write Delay (tRDWR)............... - 8

Ranks Write to Write (tWRWR).............. - AUTO

Ranks Read to Read (tRDRD)................ - AUTO

Ranks Write to Read (tWRRD)............... - AUTO

Read CAS# Precharge (tRTP)................ - 3

All PRE to Refresh........................ - 5





Clock Setting Fine Delay:



Ch1 Clock Crossing Setting................ - More Aggressive

DIMM 1 Clock fine delay................... - Current[222]

DIMM 2 Clock fine delay................... - Current[623]

Ch1 Command fine delay.................... - Current[934]

Ch1 Control fine delay.................... - Current[690]



Ch2 Clock Crossing Setting................ - More Aggressive

DIMM 3 Clock fine delay................... - Current[222]

DIMM 4 Clock fine delay................... - Current[690]

Ch2 Command fine delay.................... - Current[934]

Ch2 Control fine delay.................... - Current[623]



Ch1Ch2 CommonClock Setting................ - More Aggressive



Ch1 RDCAS GNT-Chip Delay.................. - Auto

Ch1 WRCAS GNT-Chip Delay.................. - Auto

Ch1 Command to CS Delay................... - Auto



Ch2 RDCAS GNT-Chip Delay.................. - Auto

Ch2 WRCAS GNT-Chip Delay.................. - Auto

Ch2 Command to CS Delay................... - Auto





Read delay phase adjust:



Channel 1 Phase 0 Pull-In................. - Enabled

Channel 1 Phase 1 Pull-In................. - Enabled

Channel 1 Phase 2 Pull-In................. - Enabled

Channel 1 Phase 3 Pull-In................. - Enabled

Channel 1 Phase 4 Pull-In................. - Enabled



Channel 2 Phase 0 Pull-In................. - Enabled

Channel 2 Phase 1 Pull-In................. - Enabled

Channel 2 Phase 2 Pull-In................. - Enabled

Channel 2 Phase 3 Pull-In................. - Enabled

Channel 2 Phase 4 Pull-In................. - Enabled

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE:

 

normal_614-orthos.JPG

 

 

3dMark2003:

 

normal_03-614.JPG

 

 

3dMark2005:

 

normal_05-614.JPG

 

 

 

3dMark 2006:

 

normal_06-614.JPG

 

 

 

==========

 

 

 

short description:

512x9 @ 4610Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Asus Commando 1703-Beta (03/20/2008)

 

Intel Core 2 Duo E8400 'Wolfdale' (Q747A477)

 

2x 1024 OCZ SLI-Ready Edition PC2-8500 (OCZ2N1066R2GK)

 

EVGA GeForce 8800GT Superclocked (167.27 drivers)

 

Seagate Barracudo 320gb 7200.10

 

Zalman CNPS9700 LED

 

Corsair HX520

[b][color=blue]American Megatrends Inc. BIOS Settings:[/b][/color]
[color=red]
AI Tuning:				Manual
CPU Frequency:				525
DRAM Frequency:				DDR2-1050MHz
PCI Express Frequency:			Auto
PCI Clock Synchronization:		Auto
Spread Spectrum:			Auto

[color=blue][b]Over Voltage [/b][/color]
CPU VCore Voltage:			1.4625
FSB Termination Voltage:		1.550V
NB VCore:				Auto
Memory Voltage:				2.300V
DDRII Channel A REF Voltage:		DDRII_REF+10mv
DDRII Channel B REF Voltage:		DDRII_REF+10mv
DDRII Controller REF Voltage:		Auto
SB Vcore (SATA, PCIE):			Auto
SB Chipset Voltage:			Auto

Asus C.G.I:				Auto
Static Read Control:			Auto
Configure Timing by SPD:		Disabled
DRAM CAS# Latency:			5
DRAM RAS# to CAS# Delay:		5 DRAM Clocks
DRAM RAS# Precharge:			5 DRAM Clocks
DRAM RAS# Activate to Precharge delay:	15 DRAM Clocks
DRAM Write Recovery Time:		5 DRAM Clocks
DRAM TRFC:				42 DRAM Clocks
DRAM TRRD:				10
Rank Write to Read Delay:		10
Read to Precharge Delay:		10
Write to Precharge Delay:		11

[/color]

 

Bios

normal_IMG_2230.JPG

 

normal_IMG_2231.JPG

 

Orthos & 3dMark 01

normal_naamloos.JPG

 

3DMark 03

normal_3dmark03.JPG

 

3DMark 05

3dmark20051.JPG

 

3DMark 06

3dmark2006.JPG

 

Aquamark 3

aquamark3.JPG

 

Short description

8x525 = 4200mhz

[email protected]

Share this post


Link to post
Share on other sites

Gigabite p35 DS3R

Intel E8200 "wolfsdale" intel core duo

OCZ ddr2 pc2-6400 Gold kit, 4 gig.

Samsung 250 GB SAT2

Peak Radeon HD 3850, 512MB

TSST corp CDDVDW SH-S203W

Fortron BlueStorm 500w

 

 

[b]MB Intelligent Tweaker (M.I.T.)[/b]
[color=green]
Robust Graphics Booster............. - Auto
CPU Clock Ratio..................... - 8x
CPU Host Clock Control.............. - Enabled
CPU Host Frequency (Mhz)............ - 400
PCI Express Frequency (Mhz)......... - Auto
Performance Enhancer................ - Turbo
C.I.A.2............................. - Disabled
System Memory Multiplier (SPD)...... - 2.0
Memory Frequency (Mhz).............. - 800


DRAM Timing Selectable (SPD)........ - Auto
CAS Latency Time.................... - 5 
DRAM RAS# to CAS# Delay............. - 5
DRAM RAS# Precharge................. - 5
Precharge Delay (tRAS).............. - 18
ACT to ACT Delay (tRRD)............. - 3
Bank Write to READ Delay............ - 3
Write to Precharch Delay............ - 6
Refresh to ACT Delay................ - 46
Read to Precharge Delay............. - 3
tRD................................. - 9
tRD Phase Adjustment................ - 0

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - [+0.1]
PCI-E OverVoltage Control........... - Normal
FSB OverVoltage Control............. - [+0.1]
(G)MCH OverVoltage Control.......... - [+0.1]
CPU Voltage Control................. - Normal
Normal CPU Vcore.................... - 1.22500V
[/color]

 

 

bios screen 1

bios screen 2

cpu-z, orthos

 

 

 

3d mark03 screen:

 

P35_3D_MARK_O3_seond_bench%20(Medium).JPG

 

3d mark05 screen:

 

P35_3D_MARK_O5_seond_bench%20(Medium).JPG

 

P35_3D_MARK_O6_seond_bench%20(Medium).JPG

 

 

Short decription

8 x 400 = 3.20 Ghz

[email protected]

Share this post


Link to post
Share on other sites

GigaByte GA-P35-DS3L, F7 BIOS

 

OCZ Platinum Revision 2 DDR2 800 (PC2-6400) 4G (4 x 1GB) OCZ2P800R22GK

 

Intel Core 2 Duo E6300 Conroe 1.86GHz 2M shared L2 Cashe, MC-TDX

 

BFG Tech GeForce 7600GT 256MB 128-bit GDDR3 @ 650/832 ~ NVIDIA 169.21 drivers, Zalman VF900

 

Western Digital Caviar SE WD1600JS 160GB 7200 RPM 8MB Cashe SATA 3.0Gb/s

 

Lite On DVD Burner SHM-165H6S

 

OCZ GameXStream OCZ700GXSSLI ATX12V 700W

 

DD12V-D5 PumpBlack Ice GT Stealth 240 Rad.

 

 

============

 

 

[b]Advanced BIOS Features[/b]

[color=red]CPU Multi-Threading................. - Enabled
Limit CPUID Max. to 3............... - Disabled
No-Execute Memory Protect........... - Enabled
CPU Enhanced Halt (C1E)............. - Enabled
CPU Thermal Monitor 2(TM2).......... - Enabled
CPU EIST Function................... - Enabled
Virtualization Technology........... - Enabled
[/color]

[b]MB Intelligent Tweaker (M.I.T.)[/b]

[color=red]Robust Graphics Booster............. - Auto
CPU Clock Ratio..................... - 7x
CPU Host Clock Control.............. - Enabled
CPU Host Frequency (Mhz)............ - 444
PCI Express Frequency (Mhz)......... - Auto
C.I.A.2............................. - Disabled
Performance Enhancer................ - Standard
System Memory Multiplier (SPD)...... - 2.00
Memory Frequency (Mhz).............. - 888

DRAM Timing Selectable (SPD)........ - Manual
CAS Latency Time.................... - 5 
DRAM RAS# to CAS# Delay............. - 5
DRAM RAS# Precharge................. - 4
Precharge Delay (tRAS).............. - 14
ACT to ACT Delay (tRRD)............. - 3
Bank Write to READ Delay............ - 2
Write to Precharch Delay............ - 2
Refresh to ACT Delay................ - 36
Read to Precharge Delay............. - 2
tRD................................. - 8
tRD Phase Adjustment................ - 16	

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - [+0.3v]
PCI-E OverVoltage Control........... - Normal
FSB OverVoltage Control............. - Normal
(G)MCH OverVoltage Control.......... - [+0.1v]
CPU Voltage Control................. - [1.3125v]
Normal CPU Vcore.................... - 1.27500V
[/color]

 

============

 

 

Prime 95, CPU-Z, GPU-Z, 3Dmark2001SE:

 

3d01p958hrys8.th.jpg

 

 

3Dmark03:

 

3d03mf5.th.jpg

 

3Dmark05:

3d05wh3.th.jpg

 

 

3Dmark06:

 

3d06mp1.th.jpg

 

 

shot description:

444 x 7 @ 3108 MHz ~ 1.3125Vcore

4Gig DDR2 888 MHz (5-5-4-14-2T)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×