dab Posted January 27, 2007 Posted January 27, 2007 DFI LANParty UT ICFX3200-T2R/G 12/22/2006 (LGA 775) Intel Core 2 Duo E6400 LGA775 Conroe 2MB Retail (2.13GHZ 1066FSB) L632B136T Team Xtreem PC2-6400 2GB 2X1GB DDR2-800 CL 4-4-4-10 . Sapphire Radeon X1900XT 625MHZ 512MB 256BIT 1.45MHZ GDDR3, Ati 10/11/2006 641/720 Stock Cooler (6.11) v8.31 Western Digital RaptorX 150GB 10000RPM HDD LG GSA-H22N OEM Fortron FSP Epsilon FX700-GLN 700W Noctua NH-U12F Heatpipe Cooler W/ NF-S12 Asus "Optional Heatpipe Fan" on NB * * ========== [b]Genie BIOS Settings:[/b] [color=red] CPU VID Control................ - 1.40000V CPU VID Special Add............ - 100.01% DDR2 RAM 1.8V Voltage.......... - 2.51V CPU VTT 1.2V Voltage........... - 1.26V NB Core 1.2V Voltage........... - 1.42V NB PLL 1.8V Voltage............ - 1.93V NB PLL 1.2V Voltage............ - 1.29V NB PCI-E 1.2V Voltage.......... - 1.34V NB Core 1.2V Convert From...... - 2.06V SB Core 1.2V Voltage........... - 1.34V Clockgen Voltage............... - 3.40V GTL REF Voltage Control........ - Disable CPU Core 1/2 GTL REF Volt...... - N/A CPU Core 3/4 GTL REF Volt...... - N/A North Bridge GTL REF Volt...... - N/A CPU PLL Setting Override....... - Disable PLL Override Loop Count........ - Auto Conroe P-State Multiplier...... - Auto C1E Function................... - Auto [/color] [b]Performance Options:[/b] [color=red] Memory Clock Frequency......... - Auto Current Memory Clock........... - 533 MHz Control CPU Frequency.......... - Manual CPU Frequency(MHz)............. - 395 NB FSB Strapping............... - 266 PCIE Overclock................. - 100 Software Reset Clockgen........ - Enabled Memory Overclocking............ - Enabled Overclocking Frequency(MHz).... - 502 [/color] [b]Northbridge Selections:[/b] [color=red] Memory Channels................ - Auto Memory Power Management........ - Disabled IGD Clock Gate................. - Disable NB Channel Mapping............. - Auto Simple Addr Translation........ - Disable Chip-Select Swap............... - Disable Burst Lenght................... - 8 Bank0 Map GFX.................. - 5 Bank1 Map GFX.................. - 5 Bank2 Map GFX.................. - 5 Channel Mapping NB............. - 4 Channel Mapping GFX............ - 1 Bank0 Map NB................... - 5 Bank1 Map NB................... - 7 Bank2 Map NB................... - 5 [/color] [b]Memory Timing Menu:[/b] [color=red] CS Output Timing............... - Auto CK Output Timing............... - Auto Duel Channel Split Mode........ - Auto Addr/CMD Driving Pre-Amp....... - Disabled Addr/CMD Driving Strength...... - 05 Clocking Driving Pre-Amp....... - Always Clocking Driving Strength...... - 05 Address/Command Timing......... - 2T Memory Timing Select........... - Manual CAS Timing (TCAS).............. - 4 Read RAS-CAS Delay (TRCDT)..... - 4 Write RAS-CAS Delay (TRCDR).... - 4 RAS Precharge Time TRP......... - 4 Cycle Time (TRAS).............. - 10 Row Cycle Time (TRC)........... - 32 Refresh To Active (TRFC)....... - 43 Bank To Bank CMD (TRRD)........ - 5 Write Recovery (TWR)........... - 9 Read-Write Command (TRTW)...... - 3 Write-Write CS (TRTR_CS)....... - 2 Write -Read Commad (TWTR)...... - 7 Write-Read CS (TWTR_CS)........ - 2 Read-Read CS (TRTR_CS)......... - 2 Read Data Transfer............. - 6 [/color] [b]Memory Timing Menu:[/b] [color=red] Read Data Transfer............. - Enable Read Strobe Delay.............. - Disable Read Strobe Arrival............ - Enable [/color] [b]FSB IO Strength:[/b] [color=red] FSB IO Driving Control......... - Default 1X NMOS Strength............... - N/A 1X PMOS Strength............... - N/A 2X NMOS Strength............... - N/A 2X PMOS Strength............... - N/A 4X NMOS Strength............... - N/A 4X PMOS Strength............... - N/A [/color] ========== Orthos (SP2004) + 3x CPU-Z + SmartGuardian: 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 395x8 @ 3160mhz 1.400vcore / 2.5vdimm 4.0-4-4-10 Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted January 28, 2007 Posted January 28, 2007 Gigabyte GA-965P-S3, F8 BIOS Corsair XMS2 Dominator DDR2-800 @ 4-4-4-12, 2x1GB Intel Core 2 Duo E6400 Conroe 2.13GHz 2MB L2 XFX 7800GT 256MB 256-bit GDDR3 PCI-E 16x 84.21 drivers Western Digital Caviar SE WD800JD 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s Lite-On 16x SATA DVD-RW Antec True Power Trio TP3-650 ATX12V 650W Power Supply CORSAIR Nautilus 500 Water Cooling Sytem * * * * ========== [b]MB Intelligent Tweaker (M.I.T.)[/b] [color=green] Robust Graphics Booster............. - Auto CPU Clock Ratio..................... - 8x CPU Host Clock Control.............. - Enabled CPU Host Frequency (Mhz)............ - 400 PCI Express Frequency (Mhz)......... - 105MHz C.I.A.2............................. - Disabled System Memory Multiplier (SPD)...... - 2.00 Memory Frequency (Mhz).............. - 800 High Speed DRAM DLL Settings........ - Option 1 DRAM Timing Selectable (SPD)........ - Manual CAS Latency Time.................... - 4 DRAM RAS# to CAS# Delay............. - 4 DRAM RAS# Precharge................. - 4 Precharge Delay (tRAS).............. - 12 ACT to ACT Delay (tRRD)............. - 3 Bank Write to READ Delay............ - 3 Write to Precharch Delay............ - 6 Refresh to ACT Delay................ - 42 Read to Precharge Delay............. - 3 Memory Performance Enhance.......... - Normal System Voltage Control.............. - Manual DDR2 OverVoltage Control............ - +0.2v PCI-E OverVoltage Control........... - Normal FSB OverVoltage Control............. - +0.2v (G)MCH OverVoltage Control.......... - +0.3v CPU Voltage Control................. - Normal Normal CPU Vcore.................... - 1.23750v [/color] ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: http://www.angrygames.com/ocdb/angry/gigab...x8_dom800-1.gif 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: Short description: 400x8 @ 3.20Ghz, stock voltage 4-4-4-12 Share this post Link to post Share on other sites More sharing options...
Praz Posted January 30, 2007 Posted January 30, 2007 DFI LANPARTY UT ICFX3200-T2R/G Crossfire (LGA 775) Intel Core 2 Duo E6600 Conroe 2.4GHz (2400Mhz / 4M L2 core) CORSAIR Dominator 2GB (2 x 1GB) DDR2 1066 (PC2 8500) TWIN2X2048-8500C5D Tuniq Tower 120 P4 & K8 CPU Cooler Thermalright HR-05 Copper Heatsink - North Bridge HIS IceQ3 X1900XT 512MB, Omega (7.1-based) drivers HITACHI SATA II 8MB cache 80GB hdd CyberDrive 56x CD-ROM Antec NeoHE 550w psu * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] CPU VID Control................ - 1.525 CPU VID Special Add............ - Auto DDR2 RAM 1.8V Voltage.......... - 2.39V CPU VTT 1.2V Voltage........... - 1.23V NB Core 1.2V Voltage........... - 1.48V NB PLL 1.8V Voltage............ - 1.93V NB PLL 1.2V Voltage............ - 1.21V NB PCI-E 1.2V Voltage.......... - 1.22V NB Core 1.2V Convert From...... - 2.06V SB Core 1.2V Voltage........... - 1.23V Clockgen Voltage............... - 3.40V GTL REF Voltage Control........ - Enable CPU Core 1/2 GTL REF Volt...... - 48 CPU Core 3/4 GTL REF Volt...... - 48 North Bridge GTL REF Volt...... - 128 CPU PLL Setting Override....... - Enable PLL Override Loop Count........ - Auto Conroe P-State Multiplier...... - x9 C1E Function................... - Disable [/color] [b]Performance Options:[/b] [color=red] Memory Clock Frequency......... - DRR-533 Control CPU Frequency.......... - Manual CPU Frequency(MHz)............. - 400 NB FSB Strapping............... - 266 PCIE Overclock................. - 100 Software Reset Clockgen........ - Enable Memory Overclocking............ - Enable Overclocking Frequency(MHz).... - 559 [/color] [b]Northbridge Selections:[/b] [color=red] Memory Channels................ - Auto Memory Power Management........ - Disable IGD Clock Gate................. - Disable NB Channel Mapping............. - Auto Simple Addr Translation........ - Disable Chip-Select Swap............... - Disable Burst Lenght................... - 4 Bank0 Map GFX.................. - 4 Bank1 Map GFX.................. - 5 Bank2 Map GFX.................. - 6 Channel Mapping NB............. - 5 Channel Mapping GFX............ - 1 Bank0 Map NB................... - 5 Bank1 Map NB................... - 11 Bank2 Map NB................... - 7 [/color] [b]Memory Timing Menu:[/b] [color=red] CS Output Timing............... - Delay 1/4 Clock CK Output Timing............... - Auto Duel Channel Split Mode........ - Auto Addr/CMD Driving Pre-Amp....... - Disable Addr/CMD Driving Strength...... - 05 Clocking Driving Pre-Amp....... - Always Clocking Driving Strength...... - 14 Address/Command Timing......... - 2T Memory Timing Select........... - Manual CAS Timing (TCAS).............. - 5 Read RAS-CAS Delay (TRCDT)..... - 5 Write RAS-CAS Delay (TRCDR).... - 3 RAS Precharge Time TRP......... - 5 Cycle Time (TRAS).............. - 12 Row Cycle Time (TRC)........... - 28 Refresh To Active (TRFC)....... - 42 Bank To Bank CMD (TRRD)........ - 5 Write Recovery (TWR)........... - 4 Read-Write Command (TRTW)...... - 5 Write-Write CS (TRTR_CS)....... - 2 Write -Read Commad (TWTR)...... - 5 Write-Read CS (TWTR_CS)........ - 2 Read-Read CS (TRTR_CS)......... - 2 Read Data Transfer............. - 6 [/color] [b]Memory Timing Menu:[/b] [color=red] Read Data Transfer............. - Enable Read Strobe Delay.............. - Disable Read Strobe Arrival............ - Enable [/color] [b]FSB IO Strength:[/b] [color=red] FSB IO Driving Control......... - Default 1X NMOS Strength............... - N/A 1X PMOS Strength............... - N/A 2X NMOS Strength............... - N/A 2X PMOS Strength............... - N/A 4X NMOS Strength............... - N/A 4X PMOS Strength............... - N/A [/color] ========== Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z + Everest Home Edition v2.20: http://www.diy-street.com/upload/praz/ICFX...20/orthos01.PNG 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: ========== short description: 400x9 @ 3600mhz 1.525vcore / 2.39vdimm 5.0-5-5-12 266 Strap Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted February 8, 2007 Posted February 8, 2007 Gigabyte GA-965P-DS3F10 BIOS OCZ 2GB (2 x 1GB) DDR2-800 OCZ2P800R22GK Intel Core 2 Duo E4300 Allendale 1.8ghz. 2MB L2 HIS Radeon x1950xt 256MB 256-bit GDDR3 PCI-E 16x 7.1 cats 675/918 Hitachi T7K250 160GB x2 RAID 0 FSP Group 700w * * * * ========== [b]MB Intelligent Tweaker (M.I.T.)[/b] [color=green] Robust Graphics Booster............. - Auto CPU Clock Ratio..................... - 9x CPU Host Clock Control.............. - Disabled CPU Host Frequency (Mhz)............ - 339 PCI Express Frequency (Mhz)......... - auto C.I.A.2............................. - Disabled System Memory Multiplier (SPD)...... - 2.66 Memory Frequency (Mhz).............. -902 High Speed DRAM DLL Settings........ - Option 1 DRAM Timing Selectable (SPD)........ - Manual CAS Latency Time.................... - 5 DRAM RAS# to CAS# Delay............. - 5 DRAM RAS# Precharge................. - 5 Precharge Delay (tRAS).............. - 15 ACT to ACT Delay (tRRD)............. - Auto Bank Write to READ Delay............ - Auto Write to Precharch Delay............ - Auto Refresh to ACT Delay................ - 0 (Auto) Read to Precharge Delay............. - Auto Memory Performance Enhance.......... - Normal System Voltage Control.............. - Manual DDR2 OverVoltage Control............ - +.3v PCI-E OverVoltage Control........... - +.1v FSB OverVoltage Control............. - +.2v (G)MCH OverVoltage Control.......... - +.2v CPU Voltage Control................. - 1.49375v Normal CPU Vcore.................... - 1.3250v [/color] ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: http://img.photobucket.com/albums/v335/Gem...pg?t=1171569275 3dMark2003: 3dMark2005: 3dMark2006: http://img.photobucket.com/albums/v335/Gem...pg?t=1171569477 Short description: 339x9 @ 3.050Ghz 5-5-5-15 @ 2.1v 902 mhz. Share this post Link to post Share on other sites More sharing options...
ooztuncer Posted February 9, 2007 Posted February 9, 2007 Asus P5b Deluxe wifi (? bios - will update) Team Xtreem 2GB (2 x 1GB) TXDD2048M800HC4DC Intel Core 2 Duo E6600 2.4ghz. 4MB L2 Sapphire x1800xt 256MB - stock settings (omega 3.8.291 drivers) WD500gb Caviar SE Sata II / 2x80gb Hitachi Deskstars Sata II Seasonic M12-700 Cooling NB: evercool vc-re Cooling SB: scythe kaze 40mm Cooling CPU: modified mach I (gas: r507, mach II evap, etc.) ========== [COLOR=green]AI Tuning: Manual[/COLOR] [COLOR=green]CPU Frequency………………………. – 450[/COLOR] [COLOR=green]Dram Frequency……………………. – 900[/COLOR] [COLOR=green]PCI express frequency………….. – 100[/COLOR] [COLOR=green]Spread Spectrum…………………… - Disabled[/COLOR] [COLOR=green]Memory Voltage…………………….. – 2.35v[/COLOR] [COLOR=green]CPU VCore voltage…………………. - 1.700v[/COLOR] [COLOR=green]FSB Termination voltage……….. – 1.450v[/COLOR] [COLOR=green]NB VCore………………………………… – 1.65V[/COLOR] [COLOR=green]SB Vcore…………………………………. - 1.70v[/COLOR] [COLOR=green]ICH Chipset Voltage………………. – Auto[/COLOR] [COLOR=green]Modify Ratio support……………… - Enabled[/COLOR] [COLOR=green]Ratio CMOS Setting……………….. – 9[/COLOR] [COLOR=green]C1E Support………………………….. – Disabled[/COLOR] [COLOR=green]Max CPUID Value limit…….…….. – Disabled[/COLOR] [COLOR=green]Vanderpool Technology…………. – Disabled[/COLOR] [COLOR=green]CPU TM function……………………. – Enabled[/COLOR] [COLOR=green]Execute Disable bit……………….. – Enabled[/COLOR] [COLOR=green]PECI…………………………………….... – Disabled[/COLOR] [COLOR=green]Memory Remap feature………………………….….. - Disabled[/COLOR] [COLOR=green]Configure DRAM Timing by SPD………………….. - Disabled[/COLOR] [COLOR=green]DRAM CAS# Latenc................................ - 4 [/COLOR] [COLOR=green]DRAM RAS# to CAS# Delay….................... - 4[/COLOR] [COLOR=green]DRAM RAS# Precharge............................ - 4[/COLOR] [COLOR=green]DRAM RAS# Activate to Precharge ........... - 10[/COLOR] [COLOR=green]DRAM Write Recovery Time………….............. - 6[/COLOR] [COLOR=green]DRAM TRFC………………………………………………... – 42[/COLOR] [COLOR=green]DRAM TRRD……………………………………………….… – 10[/COLOR] [COLOR=green]Rank Write to Read Delay………………………….. – 10[/COLOR] [COLOR=green]Read to Precharge Delay………………………….… - 10[/COLOR] [COLOR=green]Write to Precharge Delay…………………………... – 10[/COLOR] [COLOR=green]Static read control…………………………………….. – Disable[/COLOR] [COLOR=green]Initiate graphic adapter…………………………….. – PEG/PCI[/COLOR] ========== Orthos (blend), 2x CPU-Z, 3dMark2001SE, everest 2.20 home : http://weboperative.com/OCIDB/albums/userp...450_-_ocdb1.jpg http://weboperative.com/OCIDB/index.php?Qw...s&Qis=M&Qtmp=FS 3dMark2003: http://weboperative.com/OCIDB/albums/userp...450_-_ocdb2.jpg 3dMark2005: http://weboperative.com/OCIDB/albums/userp...450_-_ocdb3.jpg 3dMark2006: http://weboperative.com/OCIDB/albums/userp...450_-_ocdb4.jpg Short description: 450x9 @ 4.050Ghz 4-4-4-10 @ 2.35v Share this post Link to post Share on other sites More sharing options...
Chump Posted February 19, 2007 Posted February 19, 2007 DFI 975X/G INFINITY (BIOS 97TID213) INTEL CORE 2 DUO E6600 CONROE 2.4GHZ 4MB L2 CACHE + TUNIQ TOWER 120 1GB PQI (2 x 512MB) DDR2-800 XFX GeForce 6800GT AC NV SILENCER 5 350/1000 93.71 DRIVERS 250GB MAXTOR MAX-LINE SATA-2 HDD (7V250FO) SONY DL DVD-RW DRU-820A OCZ GAMEXSTREEM 700W PSU ========== [B]Advanced BIOS Feature / CPU Feature[/B] [COLOR=red]Delay Prior To Thermal.............. - 16[/COLOR] [COLOR=red]Limit CPUID MaxVal.................. - Disabled[/COLOR] [COLOR=red]CIE Function........................ - Auto[/COLOR] [COLOR=red]Execute Disable Bit................. - Enabled[/COLOR] [COLOR=red]Virtualization Technology........... - Enabled[/COLOR] [COLOR=red]Frequency Unlimit................... - Disabled[/COLOR] [B]Genie BIOS[/B] [COLOR=red]DRAM Timing Config.................. - Manual[/COLOR] [COLOR=red]PPM Function........................ - Disabled[/COLOR] [B][COLOR=black]Ratio & Clock Setting[/COLOR][/B] [COLOR=red]Current CPU Speed................... - 3798Mhz[/COLOR] [COLOR=red]CPU Clock Ratio Setting............. - x 9[/COLOR] [COLOR=red]CPU Clock Setting................... - 422Mhz[/COLOR] [COLOR=red]Current DRAM Speed.................. - 844Mhz[/COLOR] [COLOR=red]System Memory Frequency............. - 533Mhz[/COLOR] [COLOR=red]PCIE Clock Setting.................. - 100MHz[/COLOR] [COLOR=red]SATA Clock Sync. With............... - Fix 100Mhz[/COLOR] [B][COLOR=black]Voltage Setting[/COLOR][/B] [COLOR=red]CPU VID Offset Setting...............- + 362.5mV[/COLOR] [COLOR=red]Default CPU Voltage................. - 1.300v[/COLOR] [COLOR=red]CPU VTT Voltage Setting............. - 1.50v[/COLOR] [COLOR=red]DRAM Voltage Setting................ - 1.90v[/COLOR] [COLOR=red]NB Chip Voltage Setting............. - 1.90v[/COLOR] [COLOR=black][B]Miscellaneous[/B][/COLOR] [COLOR=red]Auto Detect PCI Clock............... - Enabled[/COLOR] [COLOR=red]Spread Spectrum..................... - Disabled[/COLOR] [COLOR=red]Memory Hole Remapping............... - Enabled[/COLOR] [B]DRAM Timing and Config[/B] [COLOR=red]CAS Latency Time.................... - 4 [/COLOR] [COLOR=red]DRAM RAS# to CAS# Delay............. - 5[/COLOR] [COLOR=red]DRAM RAS# Precharge................. - 4[/COLOR] [COLOR=red]Precharge Delay (tRAS).............. - 14[/COLOR] [COLOR=red]Refresh Mode Select................. - Auto[/COLOR] [COLOR=red]Write to Precharge Delay............ - Auto[/COLOR] [COLOR=red]Write to Read Delay (Same).......... - Auto[/COLOR] [COLOR=red]Write to Read Delay (Diff).......... - Auto[/COLOR] [COLOR=red]Read to Write Delay................. - Auto[/COLOR] [COLOR=red]Write Recovery...................... - Auto[/COLOR] [COLOR=red]Read Recovery....................... - Auto[/COLOR] [COLOR=red]Read Delay.......................... - Auto[/COLOR] [COLOR=red]Data A Drive Strength............... - Auto[/COLOR] [COLOR=red]Data B Drive Strength............... - Auto[/COLOR] [COLOR=red]x8 Control Drive Strength........... - Auto[/COLOR] [COLOR=red]x16 Control Drive Strength.......... - Auto[/COLOR] [COLOR=red]x8 Clock Drive Strength............. - Auto[/COLOR] [COLOR=red]x16 Clock Drive Strength............ - Auto[/COLOR] [COLOR=red]Command A Drive Strength............ - Auto[/COLOR] [COLOR=red]Command B Drive Strength............ - Auto[/COLOR] [COLOR=red]DRAM Data Integrity Mode............ - NON-ECC[/COLOR] ========== Stress Prime 2004 Orthos Edition + 2x CPU-Z + 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: Short description: DFI Infinity 975X/G E6600 @ 422x9 = 3805MHZ 1.300V + .362MV 2 X 512MB PQI DDR800 @ 4-5-4-14 1.90V Share this post Link to post Share on other sites More sharing options...
Chump Posted February 20, 2007 Posted February 20, 2007 DFI 975X/G INFINITY (BIOS 97TID213) INTEL CORE 2 DUO E6300 ALLENDALE 1.86GHZ 2MB L2 CACHE + TUNIQ TOWER 120 1GB PQI (2 x 512MB) DDR2-800 XFX GeForce 6800GT AC NV SILENCER 5 OC: 422/1191 93.71 DRIVERS 250GB MAXTOR MAX-LINE SATA-2 HDD (7V250FO) SONY DL DVD-RW DRU-820A OCZ GAMEXSTREEM 700W PSU ========== [b]Advanced BIOS Feature / CPU Feature[/b][color=red]Delay Prior To Thermal.............. - 16[/color][color=red]Limit CPUID MaxVal.................. - Disabled[/color][color=red]CIE Function........................ - Disabled[/color][color=red]Execute Disable Bit................. - Enabled[/color][color=red]Virtualization Technology........... - Disabled[/color][color=red]Frequency Unlimit................... - Enabled[/color][b]Genie BIOS[/b][color=red]DRAM Timing Config.................. - Manual[/color][color=red]PPM Function........................ - Disabled[/color][b][color=black]Ratio & Clock Setting[/color][/b][color=red]Current CPU Speed................... - 3220Mhz[/color][color=red]CPU Clock Ratio Setting............. - x 7[/color] [color=red]CPU Clock Setting................... - 460Mhz[/color][color=red]Current DRAM Speed.................. - 691Mhz[/color][color=red]System Memory Frequency............. - 400Mhz[/color][color=red]PCIE Clock Setting.................. - 100MHz[/color][color=red]SATA Clock Sync. With............... - Fix 100Mhz[/color][b][color=black]Voltage Setting[/color][/b][color=red]CPU VID Offset Setting...............- + 225.0mV[/color][color=red]Default CPU Voltage................. - 1.325v[/color][color=red]CPU VTT Voltage Setting............. - 1.50v[/color][color=red]DRAM Voltage Setting................ - 1.90v[/color][color=red]NB Chip Voltage Setting............. - 1.90v[/color][color=black][b]Miscellaneous[/b][/color][color=red]Auto Detect PCI Clock............... - Enabled[/color][color=red]Spread Spectrum..................... - Disabled[/color][color=red]Memory Hole Remapping............... - Enabled[/color][b]DRAM Timing and Config[/b][color=red]CAS Latency Time.................... - 4 [/color][color=red]DRAM RAS# to CAS# Delay............. - 5[/color][color=red]DRAM RAS# Precharge................. - 5[/color][color=red]Precharge Delay (tRAS).............. - 14[/color][color=red]Refresh Mode Select................. - Auto[/color][color=red]Write to Precharge Delay............ - Auto[/color][color=red]Write to Read Delay (Same).......... - Auto[/color][color=red]Write to Read Delay (Diff).......... - Auto[/color][color=red]Read to Write Delay................. - Auto[/color][color=red]Write Recovery...................... - Auto[/color][color=red]Read Recovery....................... - Auto[/color][color=red]Read Delay.......................... - Auto[/color][color=red]Data A Drive Strength............... - Auto[/color][color=red]Data B Drive Strength............... - Auto[/color][color=red]x8 Control Drive Strength........... - Auto[/color][color=red]x16 Control Drive Strength.......... - Auto[/color][color=red]x8 Clock Drive Strength............. - Auto[/color][color=red]x16 Clock Drive Strength............ - Auto[/color][color=red]Command A Drive Strength............ - Auto[/color][color=red]Command B Drive Strength............ - Auto[/color][color=red]DRAM Data Integrity Mode............ - NON-ECC[/color] ========== Stress Prime 2004 Orthos Edition + 2x CPU-Z + 3dMark2001SE: http://i106.photobucket.com/albums/m267/Cr...MHZ3DMARK01.jpg 3dMark2003: 3dMark2005: 3dMark2006: Short description: DFI Infinity 975X/G E6300 @ 460x7 = 3226MHZ 1.325V + .225MV 2 X 512MB PQI DDR800 @ 4-5-5-14 1.90V Share this post Link to post Share on other sites More sharing options...
Splave Posted February 20, 2007 Posted February 20, 2007 EVGA 122-CK-NF68-AR SLI, F8 BIOS Crucial Ballistix Tracer 2GB (2 x 1GB) DDR2-800 Intel Core 2 Duo E6400 Conroe 2.13GHz 2MB L2 eVGA 8800GTS 640MB 320-bit GDDR3 PCI-E 16x 97.92 drivers Western Digital Caviar SE WD800JD 160GB 7200 RPM 8MB Cache SATA 3.0Gb/s SAMSUNG 18x IDE DVD-RW OCZ GameXstream ATX12V 850W Power Supply Scythe Infinity Cooling * * * * ========== [b]FSB & Memory Config[/b] CPU Freq, Mhz....................... - 3000.0 CPU Multiplier...................... - 8x FSB - Memory Clock Mode............. - Unlinked FSB - Memory Ratio ................. - Auto FSB - QDR (Mhz)..................... - 1500 MEM (DDR), Mhz...................... - 800 [b]Memory Timing Setting[/b] Memopry Timing Setting.............. - Expert tCL (CAS Latency)................... - 4 tRCD................................ - 3 tRP................................. - 3 tRAS................................ - 8 Command Per Clock (CMD)............. - 2T tRRD................................ - Auto (5) tRC................................. - 23 tWR................................. - Auto (6) tWTR................................ - Auto (10) tREF................................ - Auto (7.8uS) [b]System Clocks[/b] CPU Multiplier...................... - 8x PCIe x16_1 (Mhz).................... - 125MHz PCIe x16_3 (Mhz).................... - Auto PCIe x16_2 (Mhz).................... - Auto PCIe x16_1 (Mhz).................... - Auto nForce SPP --> nForce MCP........... - 5 nForce SPP <-- nForce MCP........... - 5 [b]System Voltages[/b] CPU Core............................ - 1.375v CPU FSB............................. - 1.400v Memory.............................. - 2.300v nForce SPP.......................... - 1.450v nForce MCP.......................... - 1.500v HT nForce SPP <-> MCP............... - 1.500v ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: Short description: 375x8 @ 3.0Ghz 4-3-3-8 @ ddr2-800 Share this post Link to post Share on other sites More sharing options...
OldGuy Posted February 23, 2007 Posted February 23, 2007 ABIT IN9 32X-MAX LGA 775 NVIDIA nForce 680i - BIOS 1.0 Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache 2 X 1GB Geil Ultra DDR2 1000 PC8000 GX22GB8000UDC 2 XFX 7900GTX in SLI 665/815 91.47 WHQL DRIVERS 4 WD RE WD2500YD 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drives RAID 0 32K STRIPE x 4K CLUSTER OCZ GameXstream 700W Power Supply CoolitSystems Freezone CPU cooler * * * [b]CPU CONFIGURATION[/b] CPU CORE UNLOCK..................... - DISABLED EIST FUNCTION....................... - DISABLED THERMAL CONTROL..................... - DISABLED LIMIT CPUID MAXVAL.................. - DISABLED EXECUTE DIABLE BIT.................. - DISABLED VIRTUALIZATION TECHNOLOGY........... - DISABLED [b]FSB AND MEMORY CONFIGURATION[/b] SLI-READY MEMORY.................... - DISABLED CPU OPERATING SPEED................. - UNLINKED FSB <QDR>........................... - 1508 ESTIMATED NEW CPU CLOCK ............ - 3393 MULTIPLIER FACTOR .................. - X9 MEM <DDR2> ......................... - 928 FSB:MEMORY RATIO ................... - AUTO ESTIMATED DDR2 DATA RATE ........... - 928 N/B STRAP CPU AS ................... - 1066 NB PCIE CLOCK X16 .................. - 100MHZ SB PCIE CLOCK X16 .................. - 100MHZ SB PCIE CLOCK X8 ................... - 100MHZ SPP <-> MCP REF CLOCK .............. - 200MHZ [b]MEMORY TIMING SETTINGS[/b] MEMORY TIMING SETTING .............. - MANUAL tCL (CAS LATENCY)................... - 4 tRCD................................ - 4 tRP................................. - 4 tRAS................................ - 12 COMMAND PER CLOCK (CMD)............. - 2T tRRD................................ - 3 tRC................................. - 24 tWR................................. - 5 tWTR................................ - 8 tREF................................ - 7.8us [b]SYSTEM VOLTAGES[/b] CPU CORE VOLTAGE.................... - 1.395 DDR2 SDRAM VOLTAGE.................. - 2.100 DDR2 REF VOLTAGE.................... - 0% NB DDR2 REF VOLTAGE................. - 0% CPU VTT VOLTAGE..................... - 1.20 NB VOLTAGE.......................... - 1.45 SB VOLTAGE.......................... - 1.50 HYERTRANSPORT VOLTAGE............... - 1.20 Orthos, 2x CPU-Z, 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3D: Short Description: 377 X 9 @ 3393GHZ @ 1.395v 4-4-4-12 @ DDR2 928 @ 2.1v Share this post Link to post Share on other sites More sharing options...
Pihrana Posted February 23, 2007 Posted February 23, 2007 MOTHERBOARD:- ASUS P5N-E SLI - Nvidia 650i Chipset on BIOS 0401 MEMORY:- 2Gb (2x1Gb) GEIL PC2-6400 (400Mhz @ 2T 5-5-5-31) CPU:- Intel Core 2 Duo E6400 (2.13Ghz Default 8x266Mhz) COOLING :- Tuniq Tower 120 GRAPHICS:- Nvidia MSI Ge-Force GTO 512Mb GPU @ 709Mhz, Mem @ 784Mhz) CURRENT PSU:- 600W Seasonic S12 HARDRIVE:- 320Gb SATA Seagate Barracuda 7200.10Hardrive ========== [b]MB Intelligent Tweaker (M.I.T.)[/b] [color=black]-=FSB & MEMORY CONFIG=-[/color] [color=green]FSB - Memory Clock Mode............. - Unlinked FSB - Memory Ratio.................. - Auto FSB (QDR), Mhz...................... - 1700 Actual FSB (QDR), Mhz.............. - 1700.0 MEM (DDR), Mhz...................... - 800 Actual MEM (DDR), Mhz.............. - 769.9 [/color] [color=black]-=CPU CONFIGURATION=-[/color] [color=green]CPU Mulitplier...................... - 8 CPU Internal Thermal Control........ - Disabled Limit CPUID MaxVal.................. - Disabled Enhanced C1 (C1E)................... - Disabled Execute Disable Bit................. - Disabled Virtualization Technology........... - Enabled Enhanced Intel Speedstep(tm) Tech... - Disabled[/color] [color=black]-=VOLTAGE CONTROL=-[/color] [color=green]VCore Voltage....................... - 1.38125V Memory Voltage...................... - Auto NB Core Voltage..................... - 1.563V VCore Offset Voltage................ - +100mV[/color] [color=black]-=SYSTEM CLOCKS=-[/color] [color=green]NB PCIE Frequency (Mhz)............. - 100[/color] [color=black]-=CHIPSET=-[/color] [color=green]LDT Frequency....................... - 5x[/color] [color=black]-=MEMORY TIMING SETTINGS=-[/color] [color=green]tCL (CAS Latency)................... - Auto tRCD................................ - Auto tRAS................................ - Auto Command Per Clock (CMD)............. - Auto[/color] [color=black]-=ADVANCED MEMORY TIMINGS=-[/color] [color=green]tRRD................................ - Auto tRC................................. - Auto tWR................................. - Auto tWTR................................ - Auto tREF................................ - Auto tRD................................. - Auto tRFC................................ - Auto Async Latency....................... - Auto [/color] ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: http://pihrana.shackspace.com/DIY%20Street%20OCDB/2K1.jpg 3dMark2003: 3dMark2005: 3dMark2006: Short description: 425x8 @ 3.4Ghz - 1.425Vcore 5-5-5-31 Share this post Link to post Share on other sites More sharing options...
THunDA Posted March 2, 2007 Posted March 2, 2007 MSI P965 Neo 1.6 BIOS OCZ 2GB (2 x 1GB) DDR2-800 (ATI CrossFire Certified) Intel Core 2 Duo E4300 1.8GHz Power Color x1900xtx with 7.1 drivers 160gig Seagate Sata Drive NEC 3550A DVD-RW drive PcPower & Cooling SILENCER 610 PSU Danger Den Water Cooling = TDX+Maze4+BIX2+DDC-12v+38 tubing * * * * ========== [b]Cell Menu[/b] [color=red] Dynamic Overclocking.............. – Disable Auto Disable PCI Clk........................ -Enabled Spread Spectrum……………………….. - Enabled Memory Voltage…………………. – 2.2v PCI Express Voltage………………… - 1.5v Adjust CPU FSB Frequency…………. – 265 Adjust DDR Memory Frequency…..- 800 [/color] [b]Advanced Chipset Features[/b] [color=red] Dram Timing……… - Manual CAS# Latency (Tcl)…… – 5 RAS# to CAS# Delay (Trcd)….. - 5 RAS# Precharge Time (Trp)….. – 5 Min RAS# Active Time (Tras)…..- 15 [b](Don’t know why it reads 23 in cpuz)[/b] Memory Hole…… - Disabled PEG Force X1….. - Disabled HPET Support….. - Enabled HPET Mode…… - 32-bit mode [/color] ========== Orthos (dual-prime95), CPU-Z, 3dMark2001SE: http://diy-street.com/upload/thunda/c2docdbmsi/3dmark01.JPG 3dMark2003: http://diy-street.com/upload/thunda/c2docdbmsi/3dmark03.JPG 3dMark2005: http://diy-street.com/upload/thunda/c2docdbmsi/3dmark05.JPG 3dMark2006: http://diy-street.com/upload/thunda/c2docdbmsi/3dmark06.JPG Aquamark 3d: http://diy-street.com/upload/thunda/c2docdbmsi/aq3.JPG Short description: 265x9 = 2385mhz 5-5-5-15 Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted March 3, 2007 Posted March 3, 2007 Asus P5B Deluxe (rev1.03) 1004BIOS OCZ 2GB (2 x 1GB) DDR2-800 OCZ2P800R22GK Intel Core 2 Duo E6600 Conroe 2.4ghz. 4MB L2 HIS Radeon x1950xt 256MB 256-bit GDDR3 PCI-E 16x 7.1 cats 675/918 Hitachi T7K250 160GB x2 RAID 0 FSP Group 700w ** ** ** ** AI Tuning:............................ Manual CPU Frequency............................... – 360 Dram Frequency............................... – 900 PCI express frequency........................ – 101 PCI Clock Synchronation Mode................. - 33.33mhz Spread Spectrum............................. - Disabled Memory Voltage................................– 2.25v CPU VCore voltage............................ - 1.4375v FSB Termination voltage...................... – 1.40v NB VCore..................................... – 1.45v SB Vcore..................................... - 1.50v ICH Chipset Voltage.......................... – 1.057v Modify Ratio support.......................... - Enabled Ratio CMOS Setting............................ – 9 C1E Support................................... – Disabled Max CPUID Value limit......................... – Disabled Vanderpool Technology......................... – Disabled CPU TM function............................... – Disabled Execute Disable bit........................... – Disabled PECI.......................................... – Disabled Memory Remap feature.......................... - Disabled Configure DRAM Timing by SPD.................. - Disabled DRAM CAS# Latenc.............................. - 4 DRAM RAS# to CAS# Delay....................... - 4 DRAM RAS# Precharge........................... - 4 DRAM RAS# Activate to Precharge............... - 12 DRAM Write Recovery Time...................... - 6 DRAM TRFC..................................... – 42 DRAM TRRD..................................... – 10 Rank Write to Read Delay...................... – 10 Read to Precharge Delay....................... - 10 Write to Precharge Delay...................... – 10 Static read control........................... – Auto Initiate graphic adapter...................... – PEG/PCI Orthos , 2x CPU-Z, 3dMark2001SE: http://img.photobucket.com/albums/v335/Gem...pg?t=1172883887 3dMark2003: 3dMark2005: http://img.photobucket.com/albums/v335/Gem...pg?t=1172884000 3dMark2006: http://img.photobucket.com/albums/v335/Gem...pg?t=1172884044 Short description: 360x9 @ 3.240Ghz. 4-4-4-15 @ 2.25v 900 mhz. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now