Jump to content
Sign in to follow this  
RubberNeck

[RESOLVED] run memtest to qualify RAM HELP - Virgin Machine XP Install

Recommended Posts

4 hrs memtest stable and xp installed!!

 

Thanks guys

mine is bout to do the same thing :D. gonna let it run all through the 8hrs though. using the exact same timings :D this is great. now ill have my own computer again. YAY!!:)

Share this post


Link to post
Share on other sites

The HZ's have a little more to give. Try these timings and see what happens.

 

Here are my final settings and results. Anything above 270FSB was a no go at 1:1, so I settled in at 260X11 and 1:1, fairly tight timings and performance is great. Was hoping for that 275FSB 1:1 nirvana, but just wasn't going to happen. I'm happy at this point as I was able to squezze some more out of my Sandy.

 

Genie BIOS Settings:

 

FSB Bus Frequency - 260

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 11

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.425v

 

CPU VID Control - 1.375v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.66v

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 200 = RAM/FSB 1:1

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 03

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3684 Cycles

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - 6

DRAM Data Drive Strength - 3

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 5 Nano Seconds

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...