Guest Timmay Posted August 17, 2006 TFK: I've bought the wood ect, I need to get to my parents to cut it up ect Watch this space Quote Share this post Link to post Share on other sites
SeanDude05 Posted August 17, 2006 Almost ready to post my OCDB. Seems like lady luck has been dealing me bad cards, one of my maxtors just bit the dust, thank god I managed to salvage most of the data on it, including all my music, video and program .exes. So in the past two weeks, I've had a video card, hard drive, and 2GB of G.Skill RAM die. >.< I've gone through a bunch of Cope just trying to keep my nerves down. Someone tell me it's going to be alright! LoL. Quote Share this post Link to post Share on other sites
Prospector Posted August 17, 2006 I had to stop my Prime last nite,so I fired it up this morning.So far my temps are cpu 46 pwmic 47 chipset 40 Quote Share this post Link to post Share on other sites
SeanDude05 Posted August 17, 2006 Gah. Now 3dMark01 is giving me E_OUTOFMEMORY errors. Wow. This just isnt my month. Seems like my Maxtors are corrupting, could a drive failure be consistent with this error? Quote Share this post Link to post Share on other sites
likewhoa Posted August 17, 2006 Gah. Now 3dMark01 is giving me E_OUTOFMEMORY errors. Wow. This just isnt my month. Seems like my Maxtors are corrupting, could a drive failure be consistent with this error? Â Â omg you using a maxtor drive? better check it for badblocks if it's older than 2months next time buy seagate , but out of memory is a conflict with your RAM not your HD, unless the system swapped and ran out of swap space. Â btw I ripped the IHS of my opty gonna pop her back in now. Quote Share this post Link to post Share on other sites
SeanDude05 Posted August 17, 2006 >.< Im about to rip my hair out. My card seems to be giving Direct3D errors now. Ive tried updating DX, switching the pagefile, different drivers, and all 3dMarks say they cant create device D3D error... I'm about to go insane. Quote Share this post Link to post Share on other sites
TheFlowerKing Posted August 17, 2006 zarathrustra - 2Gb kits are where it's at now, only lose a few fractions of a second with them and they're so much easier than runnign 2T. Timmay - once you get that bench sorted you can try your hand with these 2x256 of bh-5 I have left sitting on my case. likewhoa - got the ihs-less buzz.. once you pop, you can't stop! Quote Share this post Link to post Share on other sites
Prospector Posted August 17, 2006 Still working on my OCDB entry-7 hours Prime now. Quote Share this post Link to post Share on other sites
oc newbie Posted August 17, 2006 Here are a couple somewhat better pi's still can't crack 26 second's though. Â Â Â Edit Just for you TFK the best 32mb i can get so far. Man i have been pushing this poor chip so hard i think i'll give it a break and do a stock speed database entry with it. Â Quote Share this post Link to post Share on other sites
Guest Timmay Posted August 18, 2006 Damn, I need to get this cooling sorted so I can catch you, Espesh that dodgy flower guy  P.S TFK hop on msn bud. Quote Share this post Link to post Share on other sites
CPDMF Posted August 18, 2006 I'm starting to feel a little heat. People are getting close so I'm going to have to stretch it out a little more. During my time off I slapped the pelt block back on my Opty and started leaning on it a little. 99% sure 3267 is a go but I only let it prime for a couple of hours before I tried 3300. I have only got that 1 hour prime and 3D stable so far. I did manage to come up with a 437 watt pelt that will be here monday so I can shoot for 3.3 some more. Quote Share this post Link to post Share on other sites
oc newbie Posted August 18, 2006 I've been working on 3150 but prime crapped out on me after more than 7 hours. Can't wait to see those clocks up, I think i hit my limit on the xp90 for now. What voltage are u running to get that high? Quote Share this post Link to post Share on other sites
