Jump to content

Recommended Posts

I like Phase.:) It would sure beat putting a set of wheels on a large ice chest to drag dry ice to lanparties.. I'm a little old for lanparties anyway. We always end up at the mens club or the casino.

Share this post


Link to post
Share on other sites
Are you psycic or something Clay?:eek: As it happens i am working on getting a 4000 KAB1E 0626FPMW

 

@Kitfit: Jus' a feelin' probably cause I feel like I know the overclocking aspect of your life well enough I could venture that as an educated guess with with a fair margine of safety. LOL:)

Plus I don't think either of us have posted very many post the other hasn't read. So as far as overclocking goes it's almost like we grew up together.(Except yer' better at it) I figured it was pretty obivious that you would buy a better core as soon as you could figure out exactly how to finess it into your budget. In other words you have a prommie and a core that won't [email protected](min) The Kitfit I know isn't going to sit still for that very long. LOL Like me I can't prime @3ghz. I'm sure you all know that I'm gonna' do what I can to fix it. What I must when I can.

But that's not exacly the first time you've asked me that though. Other's have asked me that question too. I really think I'd better leave that question alone. But I had to quit watchin' television for some reason. It was that or get drunk and stay that way....

PS Yer' right about watercooling cost. I have over $350.00 in mine with another $100.00 min. togo not including tecs-psu or ??. By the time I get done. I could have a used prommie.(Easy) Phase is safer in some ways too.

 

 

@likewhoa: Overclocking is extremely addictive! I've seen rigs in aother forum running 3 stage phase for the cpu (-150c)and 2 stages on the gpu's(-100c) Myself if I was ever invited to a lan party I'm sure I can grab either of 2 very very adequete rigs from my collection.(Not "Baby" "Baby" doesn't get moved! "Baby" stays at home!)LOL IROFLMAO......

Right now it's really startin' to look like tec cooling for me the near to intermediate future. But I also have 2# good fairly new A/C's that only need switches. ("Clay's" brain has doing loop da' loops for along time on where to get the heat exchanger to go between the 2 compressors.And which gases are best to charge them with.)LOL But alas it looks like my processors stepping maybe more cold-bugged than any of the others. So after I get some other stuff squared up and a processor that's fer sure not bugged. I may have to look into it.(-100c superpi's hummm...) But there are other forces at work here that in the future it may not even be possible to consider. So lets say it is an ambition.

Still these look really nice though:

http://www.frozencpu.com/cat/l1/g41/Phase_...tml?id=6jzpjZkc

Lot's neater lookin' than the way my rig is now. (Have you ever tried to fit a pa120.3 W/shroud,D-5 pump,with 1/2 id 3/4 od tubing into allready full midsized tower? LOL)

In fact the way yer' objecting to phase. I'd say yer' almost gettin' ready to PM "Chilly1".<---Very famous builder of fine phase units.

Hehee...("Clay" looks over at "Kifit" 7000+ mile's away. Sez: Don't worry "Bro" nuther 300 post he'll be there)LOL

Edit: Hummm.......... Doesn't this appeal to you? http://www.frozencpu.com/products/1196/cas...?tl=g41c205s524

 

Or this?

http://www.frozencpu.com/products/1180/cas...KIT.html?tl=g41

 

Dang! I didn't know they made em like that!!! There's your lan-party box. Trust me you'll be king!! IROFLMFAO LOL.

Allways try to keep an open mind. Besides that I think yer' a canidate for phase. Because of the way you posted that. I think you see it comming.

Edit2: PS Nice clock's on the dual-core...

Share this post


Link to post
Share on other sites
Perhaps we arn't bothered by the weight, because we don't go to Lan Parties and our PC's stay where they are. I can only assume somebody must have locked you in a fridge when a child or something, because every time phase has been mentioned on this forum you come out with the same sort of nonsense as the quote above. Ok you don't like phase;fine, some of us do, but we don't go round rubbishing Tec's and water cooling(which can cost more than phase anyway). So we don't need constant reminders of your aversion to phase.

 

Well done on the Pi times by the way, looks like that'l take a bit of catching.

 

Don't you get it! :P I'm just being sarcastic and funny. Don't take it personal but you are very sensitive and I can imagen you kicking your fridge while reading my post :D

 

The only reason I don't like phase is because of the weight and maintanance cost, & downtime when it breaks. Imagen having to send that big mamma to be repair or have a downtime of more than 1 week? Eitherway, Phase is cool. It's just not for me :)

 

 

Clay: dude you are a trip, those vapor chill chassis look nice, I have to look more into vapor chill and I am more interested in little peltiers :) I was thinking of getting

http://www.frozencpu.com/cat/l1/g41/...ml?id=6jzpjZkc but then I got more interested in peltiers because mainly they weight less and can give you subzero temps and below ambient load temps and that's all that matters to me.

P.S about your avatar,.. they had a giant sponge bob on top of burger king in my neighborhood about 3 months ago and somebody stole it.

Where were you 3 months ago? :P

 

CPDMF: Blackjack or Craps? Btw how is the new Conroe doing?

Share this post


Link to post
Share on other sites
Guest viking

i just piccked up a OCZ PC4000 Platinum XTC 2GB kit

but i cant find mutch info about tweeking them and im having a hard time getting past 254fsb :(

right now im running prime @ 3050mhz only 1 hr so far and ill have to close my comp in a few min :(

somene pls help me hit 260fsb so i can posst a 3100mhz i database :)

 

btw super pi 1m = 27.2xx atm

Share this post


Link to post
Share on other sites

just google it,

 

ive seen a review with thos stick @ 3-3-3-8 1T 290mhz but thats what with 3.6V

 

they can do around 260-270 with 2.8-3.0V

Share this post


Link to post
Share on other sites
Where were you 3 months ago? :P

Ohhh...Ummm.... I dunno.....LOL Isn't that abit off topic? Heh-heh...

 

It looks like I won't know til monday. If I can get the psu for tecs. And for me ATM that looks more and more the way too go.(CACJE's cold bugg at least the only 2# examples I know of that have been tested) Still phase looks very very promising for potential future use.

Share this post


Link to post
Share on other sites
Ohhh...Ummm.... I dunno.....LOL Isn't that abit off topic? Heh-heh...

 

It looks like I won't know til monday. If I can get the psu for tecs. And for me ATM that looks more and more the way too go.(CACJE's cold bugg at least the only 2# examples I know of that have been tested) Still phase looks very very promising for potential future use.

 

What peltier are you planning to get and what waterblock will cool it?

I can't wait to get CPDMF's meanwell & maze4/320w peltier to catch some subzero temps and crazy superpi scores on this lovely opty 165.

Share this post


Link to post
Share on other sites

@likewhoa. Blackjack mostly.. I'm still waiting for them to build a topless casino. :)

 

Conroe rig is coming along. New board will be here Monday, PSU Tuesday or Wednesday, then wait a paycheck for the RAM and waterblock.

Share this post


Link to post
Share on other sites
Don't you get it! :P I'm just being sarcastic and funny. Don't take it personal but you are very sensitive and I can imagen you kicking your fridge while reading my post :D

 

The only reason I don't like phase is because of the weight and maintanance cost, & downtime when it breaks. Imagen having to send that big mamma to be repair or have a downtime of more than 1 week? Eitherway, Phase is cool. It's just not for me :)

Downtime? and sorry to burst your little protective bubble of ignorance but maintenece isnt a big issues with the units the current members of this forum are using.and Um so once we go cold we cant use a BT or H2O? Or even the stock HSF if something does go wrong?? yes TEC's are great, but alot more prone to problems, btw a good TEC set up cost's more than my Vapo, or kit's machII. So do us all a favor, and get over it, I dunno about the other member's but im personally tired of you shooting off your "thoughts" every time someone mentions phase (not just in this thread).

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...