Jump to content

Recommended Posts

I can't enter windows in 3ghz but in 2.9 yes.

 

I don't think this thread is for you, if you can't even enter windows at 3.0GHz you're never going to be stable in it (its not you, its your processor, probably). Your power supply could easily be giving you issues as it isn't even close to what you need.

Share this post


Link to post
Share on other sites
Ohhh... I want onna' dem' tooo!!! You guys are gonna' make me put my clockin' head back on again aren't ya's!!(LOL) I got and entry in the OCDB for 290 1-1 (That was easy) It has done 295 1-1 but I didn't like the amount of vid that took. I read somewhere that pulling the IHS I can run a lower vid. Between that and my W/C. I think I'll put it in the bag.(I think Hehee)

But guy's It'll be awhile instead of buyin a rad- pump-res. I went for storage. Plus right now I'm dealin' with some pretty toasty daytime ambients. Nuther month-or two or so I'll get on it.

Have ya's thought about makin' that 300fsb 1-1. or 3ghz either or both? More truly like the nf2 toasters?(250fsb 1-1 or 2500mhz either or both) Because both or either is gonna' be tuff. And still many won't be able won't either.(I'm pretty sure once I get some better cooling I can pull 300X10 1-1. (But not at all certain)

Edit: Also with the 300 or 3000 requirement peep's will werk really really hard to do both.(It really is a massive gauntlet!)

 

lol i can barely get my ddr400's to run at 250. but anways i think i got 3006mhz stable. i had 7hr prime stable when i left for work this morning. hopefully nothing went wrong in an hr. :rolleyes:

Share this post


Link to post
Share on other sites

@l3lackh0le: I hope it werk's for ya'. I've had that happen to me before though. Once like about 1 min to go! But usually if ya' get past the first coupla'-few hrs yer' ok.(Not allways but usually) If vid voltage is short will usually fail in 2-3hrs.(Usually not allways)

Edit: That's why I said either like the nf2 toasters. Some processors won't do 3ghz but will 315fsb 1-1. sorta' give some of the older processors a shot at it.

Edit2: @sauron18 Yup could be psu. Could be processor too(Many won't I don't even know fer' sure if mine will)....You might want to start another thread for help. Easy on the vid!

Share this post


Link to post
Share on other sites
@l3lackh0le: I hope it werk's for ya'. I've had that happen to me before though. Once like about 1 min to go! But usually if ya' get past the first coupla'-few hrs yer' ok.(Not allways but usually) If vid voltage is short will usually fail in 2-3hrs.(Usually not allways)

 

yea i tried w/ lower voltage yesterday and it failed at about 4hrs so...crossing my fingers this time :D i don't want to have my cpu running at 1.58v for too long

Share this post


Link to post
Share on other sites
yea i tried w/ lower voltage yesterday and it failed at about 4hrs so...crossing my fingers this time :D i don't want to have my cpu running at 1.58v for too long

Hehe.. I don't like my vid much past 1.5 either. I try to keep it close to stock 24/7 .(Mine runs oks like that)Don't like load temps much over 42-45c either.(55c+ I see errors on most of my rigg's) I'll probably wait till' I got me coolin' ironed out abit better save my processor abt. It seems in I needed 1.6+ for 295X10 1-1 to get into windoors and pass occt 3dm01 S&M ect. that's with the IHS on though.I didn't like that or the load temps. So I didn't prime. It may need more to prime.(Usually does but maybe not)

Share this post


Link to post
Share on other sites
Hehe.. I don't like my vid much past 1.5 either. I try to keep it close to stock 24/7 .(Mine runs oks like that)Don't like load temps much over 42-45c either.(55c+ I see errors on most of my rigg's) I'll probably wait till' I got me coolin' ironed out abit better save my processor abt. It seems in I needed 1.6+ for 295X10 1-1 to get into windoors and pass occt 3dm01 S&M ect. that's with the IHS on though.I didn't like that or the load temps. So I didn't prime. It may need more to prime.(Usually does but maybe not)

 

yea this is just for ggg DEF not for 24/7. i'm gonna bring it back down to 1.375 max for 24/7.

Share this post


Link to post
Share on other sites

I was wondering if someone could help i've been tryiing to get to 3Ghz so i can join the club and hang out and stuff lan parties etc. LMAO jk. Well i'm having a bit of trouble trying to get past the 3Ghz wall and i've upped the vid to around 1.65 and stll nothing errors out in a few seconds you think if i go lower than what i started at which was 1.53 maybe it would work better and also will the chipset and LDT have anything to do with my clocks and if so what is a recommended increase thanks

Share this post


Link to post
Share on other sites

A6437 ::= you shouldn't have to increase the chipset/LDT voltage, although you may have to change the LDT multi depending on what HTT you are running. What are the settings you run stable and what have you changed?

 

TFK

Share this post


Link to post
Share on other sites
Have ya's thought about makin' that 300fsb 1-1. or 3ghz either or both? More truly like the nf2 toasters?(250fsb 1-1 or 2500mhz either or both) Because both or either is gonna' be tuff. And still many won't be able won't either.(I'm pretty sure once I get some better cooling I can pull 300X10 1-1. (But not at all certain)

Edit: Also with the 300 or 3000 requirement peep's will werk really really hard to do both.(It really is a massive gauntlet!)

300 1:1 memory and over should be a walk in the park with a couple of sticks of DDR600 .

Share this post


Link to post
Share on other sites

Oh TCCD.. how I loved ye.. and how you cheated on me.. *wipes a tear from his eye*

Why oh why must I live so far from anywhere I can rma?

 

(I miss you so much tccd.. I.. *cries* loved you)

Share this post


Link to post
Share on other sites

It's true. Since losing my dog over a year ago I haven't cried, even when I took a huge chunk out of my leg with a computer case side panel. But when my Geil One stopped working with cas 2.5 I got pretty damn close..

 

P.S. I never abused the ram. I save that for mobo's/cpu's/winbond.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...